Orbit Shrub and Flower Bed Drip Kit with Timer Instruction Manual
- June 12, 2024
- Orbit
Table of Contents
Orbit Shrub and Flower Bed Drip Kit with Timer
Product Information
The Hose End Watering Flowerbed and Shrub Kit is a comprehensive kit designed for easy and efficient watering of flowerbeds and shrubs. It includes various components that allow you to create a customized irrigation system.
Product Usage Instructions
- Step 1: Attach the Hose Faucet to your water source.
- Step 2: Layout the tubing according to your desired configuration. Cut the tubing when you reach the last plant.
- Step 3: Flush the tubing with water and attach the End Plug to seal the tubing.
- Step 4: Attach the sprinklers or Adjustable Bubblers on Spike to the tubing. Ensure that the connection is tight and secure.
- Note: To insert a coupling into the distribution tubing, use the Punch Tool. Place the coupling in the hole on the blunt end of the tool and push the exposed end into the distribution tubing.
For layout examples and further information, please visit our website at www.orbitonline.com or www.canada.orbitonline.com. You can also contact us at 1-800-488-6156.
This kit contains
Installation Instructions
Step 1: ATTACH TO HOSE FAUCET
LAYOUT TUBING
Step 3: FLUSH TUBING AND ATTACH END FITTING
- Turn on water to flush debris from the tubing.
- Use the ½” Figure 8 End Fitting to end the ½” tubing line.
Step 4: ATTACH SPRINKLERS
- With the punch tool punch a small hole in one side of ½” tubing.
- Press a ¼” coupling into the hole created by the punch tool until the connection is tight and secure.
Note: The punch tool handle can be used to insert a coupling into the distribution tubing. Place the coupling in the hole on the blunt end of the tool and push the exposed end into the distribution tubing.
- Attach ¼” tubing to the end of the coupling and run the tubing to your tree or shrub and cut.
- Attach the barbed end of the adjustable bubbler to the end of the ¼” tubing and place spike next to the plant.
- Adjust water flow by turning the bubbler head
- Use ¼” End Plug to plug a hole in ½” tubing or to end a ¼” tubing line.
Note: Insert a ¼” tee to use multiple sprinklers in one area. The use of multiple sprinklers is ideal for trees and plants that need additional watering.
LAYOUT EXAMPLES
- For cold water outdoor irrigation use only. Keep from freezing.
Need Help?
If you encounter a problem, please reach out to us before returning your
B-have to the store.
Scan the QR Code to access the help page online.
or visit us at:support.orbitonline.com
For more information, please visit our website
- www.orbitonline.com
- www.canada.orbitonline.com
- call us at 1-800-488-6156
Orbit Irrigation Products, LLC
- North Salt Lake, UT 84054
- orbitontine.com
© 2022 Orbit Irrigation Products, LLC
References
- Smart Watering, Sprinkler & Drip Systems – OrbitOnline
- Smart Watering, Sprinkler & Drip Systems | Orbit Irrigation – OrbitOnline