RECKAUDIO DANCE15 Reck Audio Dance 15 Inch Owner’s Manual
- August 24, 2024
- RECKAUDIO
Table of Contents
RECKAUDIO DANCE15 Reck Audio Dance 15 Inch
Product Information
Specifications
- Model: DANCE12/15
- Power Input: 230V AC / 115V AC
- Frequency: 50Hz (AC230V) / 60Hz (AC115V)
- Country of Origin: China
Product Usage Instructions
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the out position, press it in.
- Keep pushing the MODE button to find BLUE.
- When in BLUE mode, the display will show BLUE.
- Connect your Bluetooth device such as an iPad, iPhone, or PC to the amplifier.
- Adjust the MP3 button to a suitable level.
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the out position, press it in.
- Insert an SD card or USB memory storage device.
- Adjust the MP3 button to a suitable level.
- Turn on the power.
- Turn the MIC IN level button to the minimal level.
- Use a 1/4 input jack Mic to insert.
- Adjust the MIC IN button to a suitable level.
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the out position, press it in.
- Keep pushing the MODE button to find FM.
- When in FM mode, the display will show the FM channel.
- Press once to search radio stations and save them automatically.
- Adjust the MP3 button to a suitable level.
- There is 1 line input on the back panel for connecting external devices.
The built-in LED lights only work with music rhythm at a certain volume level. If the lights don’t work, try turning up the volume.
FAQ
- Q: How do I connect my Bluetooth device to the amplifier?
- A: Follow these steps:
- Turn on the power of the amplifier.
- Adjust the MP3 button to a minimal level.
- Select Bluetooth mode by pressing the MODE button until BLUE is displayed.
- Connect your Bluetooth device (e.g., iPad, iPhone, PC) to the amplifier.
- Adjust the volume levels on both devices for optimal sound quality.
- Q: Can I use a cellphone, iPad, or PC with a USB port?
- A: No, these devices cannot be read by the USB port. You may connect them using Bluetooth or the LINE IN function instead.
Overview
-
USB port: Use it to insert the USB memory storage device with MP3 files.
-
SD port: Use it to insert the SD card with MP3 files.
-
Remote receiver.
-
Input mode: Select an input mode, BLUE/FM/MP3 player.
-
Press once to jump to the previous song or FM channel.
Press and hold to decrease the volume level. -
Press once to jump to the next song or FM channel.
Press and hold to increase the volume level. -
It is a repeat button. We provide 4 modes Repeat all/ Repeat one/Random/Folder Repeat all.
-
Press once to play or pause a song(MP3 mode)
Press and hold on to enter folder mode, and the screen will show ” FOLD”. then press to choose your favorite music folder.
Press once to search radio stations and they can be saved automatically(FM mode). -
Mic 1 level control: Use this control to set the volume level of the Mic 1 IN signal.
-
Mic 2 level control: Use this control to set the volume level of the MIC 2 IN signal.
-
MP3 level control: Use this control to set the volume level of the MP3 signal.
-
Equalizer: designed for 12db cut or boost.
-
Mic Input:1/4” connector for an unbalanced Microphone.
-
MP3/LINE IN Switch volume control.
-
Overload indicator: If the red LED is ON constantly, lower the general
-
115V-230V selector.
-
AC power: Use it to connect the AC power cord.
-
LED light switch.Note: The built-in LED lights only work with music rhythm at a certain volumn level. P.S.If the lights don’t work, please try turning up the volumn.
-
Speaker out: It is a SPEAKON jack, use it to connect another passive speaker.
-
ON/Off power switch.
-
Line Output: Allows you to connect another active or mixer console through an RCA jack speaker.
-
Line Input: This allows you to connect an external audio device through an RCA jack.
APPLICATION USES
Bluetooth Usage
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the “out” position, press it in.
- Keep pushing the MODE button to find BLUE.
- When in BLUE mode, the display will show BLUE.
- Connect the device with BLUE function.
- Turn the MP3 button to a suitable level respectively.
When in the BLUE mode, you can connect your Bluetooth devices such as an Ipad
Iphone, or PC to the amplifier.
Note: Remember to turn up the volume of the connected device to a
suitable level for a good sound effect.
SD and USB Insert Instructions
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the “out” position, press it in.
- Insert an SD card or USB memory storage device.
- Turn the MP3 button to a suitable level respectively.
NOTE: Cellphones, Ipad, and PC can not be read by USB Port.
You may connect them by BLUETOOTH or LINE IN function.
MIC Usage
- Turn on the power.
- Turn the MIC IN level button to the minimized level.
- Use a 1/4″input jack Mic to insert.
- Turn the MIC IN button to a suitable level respectively.
FM Usage
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the “out” position, press it in.
- Keep pushing the MODE button to find the FM
- When in FM mode, the display will show the FM channel.
- Press once to search radio stations and they can be saved automatically.
- Press once to jump to the previous FM channel.
- Press once to jump next FM channel.
- Turn the MP3 button to a suitable level respectively
LINE IN Mode
There is 1 line input. on the back panel
- Turn on the power.
- Turn the MP3 button to the minimal level.
- Check the MP3/Line selector. If it is in the “in” position, press it out.
- Connect the music source through the RCA jack
- Turn the MP3 button to a suitable level respectively.
You can use the LINE IN function when you wish to link up an additional stereo
signal source without the use of a mixer console, such as a CD player, DVD
music plays, or MP3 player.
Note: Remember to turn up the volume of the connected device to a
suitable level for a good sound effect.
REMOTE CONTROL FUNCTION
- Press these buttons to access the previous-) or next(+) folder when using USB/SD mode.
- Press this button to switch between USB/SD/FM and Bluetooth modes.
- Press this button to go to the previous or next song or channel when using USB drive/SD mode.
- Press this button to play or pause the MP3 song when using USB/SD mode or selected FM channel automatically.
- Press this button to decrease(-) or increase(+) the volume.
- Press this button to select from 5 preset EQs: POP, ROCK, JAZZ, CLASSIC and COUNTRY
- Press this button to select songs by 10-digit numbers.
- Press this button to select songs by 100-digit numbers.
- Press these number buttons to select the MP3 files.
sales@reckaudio.com
WWW.RECKAUDIO.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>