Joie Savvy Lite 3 in 1 Baby Carrier Gemm Instruction Manual

Joie Savvy Lite 3 in 1 Baby Carrier Gemm Instruction Manual

Parts List

Read all the instructions in this manual before using this product. If you have any further questions, please consult the retailer. Some features may vary depending on model. No tools are required for assembly.

1. Magnetic Shoulder Buckles
2. Head Support
3. Head Support Buttons
4. Leg Opening Adjustment Buttons
5. Side (Leg) Buckles
6. Adjustment Button Hooks 1
7. Adjustment Button Hooks 2
8. Adjustment Buttons
9. Privacy Shield and Sun Protection Pocket
10. Privacy Shield and Sun Protection Snaps
11. Shoulder Strap Adjustment Buckle
12. Lumbar Support Buckle
13. Bib (X1)
14. Harness Covers (X2)

WARNING

• Check to assure all buckles, snaps, straps, and adjustments are secure before each use.
• Check for ripped seams, torn straps or fabric and damaged fasteners before each use.
• Stop using the carrier if parts are missing or damaged.
• Child must face towards you until he or she can hold head upright.
• Ensure proper placement of child in product including leg placement.
• Make sure baby’s legs are straddling the seat and arms extend through arm holes.
• Regularly check that your child is comfortably and securely seated in the baby carrier.
• To prevent hazards from falling, ensure that your child is securely positioned in the carrier.
• Hold your baby closely at all times until correctly attached.
• Premature infants, infants with respiratory problems, and infants under 4 months are at greatest risk of suffocation.
• For low birth weight babies and children with medical conditions, seek advice from a health professional before using the product.
• When using the soft carrier, monitor your child.
• Be aware of hazards in the domestic environment e.g. heat sources, spilling of hot drinks.
• Take care when bending or leaning forward or sideways.
• Your balance may be adversely affected by your movement and that of your child.
• This baby carrier is designed for use by adults while walking, standing or sitting only.
• This baby carrier is not suitable for use during sporting activities.
• DO NOT use this soft carrier if you use a pacemaker, as the magnetic buckles can interfere with the pacemaker.
• NEVER use a soft carrier when balance or mobility is impaired because of exercise, drowsiness, or medical conditions.
• NEVER use a soft carrier while engaging in activities such as cooking and cleaning which involve a heat source or exposure to chemicals.
• NEVER wear a soft carrier while driving or being a passenger in a motor vehicle.
• NEVER lie down or sleep with baby in the baby carrier.

Use Modes and Requirements

Please refer to the wording below for proper usage of each product mode to ensure the safety of your child. There are three carry modes. DO NOT use carrier for newborns under 3.5 kg. 1

Newborn Mode with Integrated Newborn Seat

1. Child should be positioned close to you and high on your body. Keep your child’s face visible to you at all times. Use head support for children weighing 3.5 – 6.5 kg. Your baby’s head should be supported until he or she has a strong head control (approximately 4 months of age).

2. Loop button hooks 2 around the adjustment buttons. 2
   

3. Fasten leg hole adjustment button to adjust the leg opening to the smallest, comfortable size. 3
   

4. Fasten two upper buttons to use the head support. 4
   

5. Fasten shoulder strap adjustment buckle and put head through opening with buckle landing on your back. 5
   

6. Fasten waist support buckle and adjust to fit snugly around waist. 6
   

7. Place child in the carrier and hold snugly against you with one hand. Use other hand to fasten magnetic shoulder buckles one at a time. 7
   

8. Fasten the leg buckles and adjust to appropriate size. 8
   

9. Carrier is ready to use in Newborn Mode with Integrated Newborn Seat. 9
   
   

Infant Facing-In Mode

1. No adjustment buttons are required for Facing-In Baby Seat. 10
   

2. Fasten shoulder strap adjustment buckle and put head through opening with buckle landing on your back. 11
   

3. Fasten waist support buckle and adjust to fit snugly around waist. 12
   

4. Place child in the carrier and hold snugly against you with one hand. Use other hand to fasten magnetic shoulder buckles one at a time. 13
   

5. Fasten the leg buckles and adjust to appropriate size. 14
   

6. Carrier is ready to use in Infant Facing In mode. 15
   
   

Infant Facing-Out Mode

1. Loop button hooks 1 around the center adjustment buttons. 16
   

2. Fasten shoulder strap adjustment buckle and put head through opening with buckle landing on your back. 17
   

3. Fasten waist support buckle and adjust to fit snugly around waist. 18
   

4. Place child in the carrier and hold snugly against you with one hand. Use the other hand to fasten magnetic shoulder buckles one at a time. 19
   

5. Fasten the leg buckles and adjust to appropriate size. 20
   

6. Carrier is ready to use in Infant Facing Out mode. CHECK: Make sure that child’s legs fall in the “M”position as recommended by The International Hip Dysplasia Institute. 21 22
   
   
   

7. Optional: Roll up the unused length of the adjustment straps. Secure the roll by wrapping the small loop around it. 23 24
   
   
   

Privacy Shield and Sun Protection

Ensure that the privacy shield is not covering the child’s mouth or secured too tight over their head.

1. Make sure head support is fully fastened and pull the sun shade out of the pocket on the top of the head support flap. 25
   

2. Fasten the sun shade straps to the snap on carrier shoulder straps. 26
   

3. Sun protection is adjustable and can be adjusted to appropriate fit by attaching to different snaps on the sun protection. 27
   
   

Bib

1. Make sure that the head support is folded down and secured into place with the lower head support buttons. Store the extra length of shoulder buckle adjustment in the pocket on shoulder buckle strap. 28
   

2. Cover the front of the head support with the bib by attaching it to the two buttons. 29
   

3. Wrap the top flaps of the bib around both shoulder buckle straps and fasten each hook and loop straps. 30 31
   
   
   

Harness Covers

1. Make sure that the head support is folded down and secured into place with the lower head support buttons. Store the extra length of shoulder buckle adjustment in the pocket on shoulder buckle strap. 32
   

2. Wrap harness covers around shoulder buckle strap, covering the top head support button, and fasten the hook and loop straps. 33 34
   
   
   

Care and Maintenance

1. Refer to care tag attached to carrier fabric for wash and dry instruction. Carrier MUST be washed inside a mesh laundry bag.
2. Store carrier, harness covers and bibs in mesh laundry bag when not using.
3. It is normal for fabric to fade from sunlight and to show wear and tear after a long period of use.
4. For safety purposes, ONLY use parts provided by joie.
5. CHECK regularly that everything is functioning properly. If any parts are torn, broken or missing, STOP using this product.

References

• Baby Gear That Goes Above & Beyond | Joie

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>