rizoma Vespa GTS 300 Restomod Front Emblem User Manual
- June 12, 2024
- rizoma
Table of Contents
rizoma Vespa GTS 300 Restomod Front Emblem
Product Information
Welcome to Rizoma – a brand that specializes in high-quality motorcycle accessories. The user manual provides essential instructions for the installation and usage of our products. It is important to read and follow these instructions carefully to ensure proper functioning and safety. If you have any doubts or need assistance, please contact an authorized RIZOMA dealer. Our products may not be compatible with all motorcycles or aftermarket accessories, so it is recommended to consult with your dealer for compatibility.
General Conditions
- All tightening should be done after correctly positioning the accessories without forcing the moving parts. This ensures the integrity and proper functioning of the product.
- After installing any Rizoma product, it is crucial to check the functionality of related components such as brakes, throttle, clutch, lights, and steering. These checks should be repeated periodically, especially after long trips or extended periods of not using the bike.
- Your RIZOMA products require regular inspection and maintenance. If any leakage, bending, deformation, cracking, chipping, or wear is observed, even if minor, it is advised to have a RIZOMA dealer inspect the products before riding again. Do not attempt to repair or modify the Rizoma products; always replace with Rizoma original components.
Product Usage Instructions
- Before starting any work, ensure that your motorbike is standing firmly to avoid damage or injury.
- For cleaning your product, do not use detergent, aggressive products, or abrasive sponges that can damage or scratch the product. Instead, use only neutral detergent with cold water.
Installation Steps
Step 1: Remove Original Emblem
To install the “Inserto logo cravattino Restomod front emblem” (PART
NUMBER: ZVP037), follow the steps below:
- Remove the original emblem from your motorbike.
Please note that the kit’s completeness should be checked on the part list. The indicated difficulty level and time of assemblage do not include the removal of OEM components.
Estimated Time of Assemblage: 5-10 minutes
Please refer to the complete user manual for additional installation
instructions and safety precautions.
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to
mount and use the product correctly and enjoy all the features it has. For
your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair or maintenance, can cause accidents. Keep this user guide
as a reference for the future. RIZOMA accepts no liability for any damage, of
any kind, which may be caused, directly or indirectly, to persons or things as
a result of incorrect assembly or failure to observe all the assembly
instructions. We also invite you to comply with the provisions of the Highway
Code and Traffic rules and/or to additional regulations in force in your
Country.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com). -
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
-
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking,
bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact
your RIZOMA dealer. O.E.M.: original equipment manufacturer
Restomod front emblem
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
REMOVE ORIGINAL EMBLEM
Attention: remove the original emblem. Take care not to damage any part of the bike
INSTALL RIZOMA EMBLEM
Attention: clean and degrease the highlighted surface.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions. Only you know the limits of your riding ability and only
you can control the conditions under which you ride. By and in consideration
for his/her purchase and use of the RIZOMA product, the user expressly
recognizes and agrees that in the event of any claim arising out of the use of
this RIZOMA product, whether such claim is based in contract, warranty, tort
(personal injury or wrongful death) or otherwise, the laws of the Republic of
Italy shall apply and jurisdiction and venue for any such action shall be in
the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a
motorcycle rider safety clinic. Always wear a properly fitted and fastened
motorcycle helmet (RIZOMA recommends a full face helmet), that has been
approved by ANSI , SNELL, CE, or any other relevant authority, and any other
safety equipment necessary for your riding style, such as full finger gloves,
boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle. Be sure that your tires
are inflated to the correct pressure and that there is no damage whatsoever in
the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>