BLAUPUNKT MPA 1480 Dynamic Amplifier Instruction Manual
- June 12, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT MPA 1480 Dynamic Amplifier Instruction Manual
Operating and Installation Instructions
CAUTIONS
Proper system planning is vital in order to maximize the device’s performance
and road safety. Plan your installation carefully to avoid compromising
performance reliability of the system. Consult an authorized Blaupunkt dealer
for installation or reparation. Read the manual carefully before operating the
device for the first time.
Safety Notes
Ensure to follow below safety notes during installation and wiring connection: –
- Disconnect the negative terminal of the battery. Refer to the safety notes of the vehicle manufacturer.
- Ensure positions of the holes are nowhere near the vehicle component to avoid any damage during drilling.
- Ensure cross section of the cable is no less than 2.5mm’ if the positive and negative cables are too long.
- Incorrect installation may result in malfunction of the device or the car sound system.
Installation and Connection Instructions
- Select a dry and well-ventilated location to install the device.
- The device must not be installed in overly exposed location such on the rear shelf, rear seat etc.
- The installation location must be suitable for screw holes and have stable ground support.
Integrated Fuse
The integrated fuse in the device protects the output voltage and the entire
electrical system in case of malfunction. Do not replace damaged fuse with
higher current.
Disclaimer
In no event shall Blaupunkt be liable for any direct, indirect, punitive,
incidental, special consequential damages to property or life and whatsoever
arising out of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.
General Safety Notes
Observe the following to protect yourself against injuries:
- The supply voltage requirement is 12V DC with grounded negative connection. Unauthorised dismantling or modifying may void the warranty of the device. Blaupunkt is not liable for any loss or damaged caused or resulting from unauthorized reparation or modification to the device. Refer to a Blaupunkt specialist in case of any installation or reparation required.
- The device’s core components may be damaged when the car is driven on bumpy roads for a prolonged period of time or if it is used to play non-standard volume level.
- Please do not operate the car radio under extreme temperature conditions (extremely high temperature or extremely low temperature); ensure the temperature within the car ranges from -10°C to 85°C (Storage temperature : 5°C to 35°() before connecting to the power supply.
- For abnormalities, please refer to TROUBLESHOOTING. Consult a specialist if the problem persist.
- Solvents, cleaning and scouring agents as well as dashboard spray and plastics care products may contain materials which can damage the surface and screen of the device. Use only dry or slightly moistened cloth to clean the device.
Recycling and Disposal
Do not dispose of your old unit in the household trash!
Use the return and collection systems available to dispose of the old device.
This manual may be updated from time to time without any notice. Visit www.blaupunkt.com for more info.
INPUT FUNCTION
- PRO/PWR Indicator
- HPF Control
- Crossover (HPF/FULULPF)
- CH1/ CH2 Gain Control
- Input
- Output
- CH3/ CH4 Gain Control
- Bass Boost
- LPF Control
- Power
- Fuses
- 4 Channel Speaker Output
SPECIFICATION
Power
- Voltage Supply: 11-16V DC
- Idling Current: 0.8A
- Fuse: 35Ax 2
- Consumption @ 20, 14.4 VDC: S0A (Max Musical Power)
Amplifier
- Amplifier Class : CLASS AB
- Channel : 4/3/2
- PCB Layer: 1
- Max Output Power@ 4 ohms: 160W x 4
- RMS Power 4 ohms: BOW x 4
- RMS Power 2 ohms: 120W x 4
- RMS Power 4 ohms Bridge : 240W x 2
- Signal-To-Noise Ratio : >96dB
- Frequency Response : 1 0Hz – 45kHz
- Gain Adjust: 1 B0mV – BV
- Bass Boost Frequency: 39-59Hz
- Bass Boost Level : 0-1 2d B
- Total Harmonic Distortion : <0. 1 %
- Crossover Frequency: 32Hz – 300Hz (L); 35Hz -500Hz (H)
- RCA Input: 4 Channel
- RCA Output: 2 Channel
- Dimension (W x H x D) : 340 x 200 x 57mm
- Net Weight: 2.83kg
Accessories
WIRING DIAGRAM
Stereo Mode
Speaker Connections
Bridged Mode
Power Connection Leads
⚠ WARNING
Do not connect negative charge of the battery to the positive charge before
installation.
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt authorized dealer if problem persist.
https://taplink.cc/blaupunkt.apac
Blaupunkt Car Entertainment – Asia Pacific Competence Centre
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>