Wicked Audio Brawl (no mic) Wired Earbuds User Manual
- June 12, 2024
- WICKED AUDIO
Table of Contents
Wicked Audio Brawl (no mic) Wired Earbuds User Manual
SPECS
- DRIVER / BOBINA: 10 mm Neodymium
- SENSITIVITY / SENIBILIDAD: 101 dB
- FREQUENCY / FRECUENCIA: 20-20,000 Hz
- IMPEDANCE / IMPEDANCIA: 16 Ohms
- CORD LENGTH / LONGITUD DEL CABLE: 4 ft / 1.2 m
FEATURES
- 45° SMART PLUG
- NOISE ISOLATION
- 3 CUSHION SIZES
REMOVING THE EARBUDS
Gently twist the earbud from side to side as you slowly pull it out. Do not pull on the cord to remove the earbud. This can damage the earbud.
3 CUSHION SIZES FOR MAXIMUM COMFORT
For the best sound performance, outside noise cancellation, and the most comfortable fit, try out each ear cushion. Choose a cushion that easily ts into your ear, feels comfortable, and is easy to remove.
REPLACING THE CUSHIONS
- Simply pull on the cushion you wish to remove until it comes off
- Select the cushion you wish to put on, then twist and ease it on.
THE Y-SPLITTER
- Remove the upper part of the Y-splitter by pulling it upwards.
- Pull it up to the mic to help reduce tangles.
LIFETIME WARRANTY
Keep your receipt to obtain warranty service.
Go to www.wickedaudio.com for more details.
Developed in Utah, U.S.A.
Made in China
WICKED AUDIO, INC.
875 W 325 N
Lindon, UT 84042
DOWNLOAD
Wicked Audio Brawl (no mic) Wired Earbuds User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>