ROLLS MS111 Professional Mic Switch User Guide
- June 6, 2024
- Rolls
Table of Contents
ROLLS MS111 Professional Mic Switch featured
FEATURES
- Balanced Female XLR Input and Male XLR Output jacks
- Reversible Activation Switch “Up” position can be mic on or off
- Can be stand-mounted with the Rolls MSC106 mic mount accessory
OPERATION
To switch a microphone signal on or off connect the balanced XLR cable coming from your microphone to the female Input jack on the MS111 and connect the male Output jack with a balanced XLR cable to the input of your mixer, or the next device in the signal path. Press the switch on the MS111 once to activate the microphone, press the switch again to mute the microphone.
ASSIGNMENT SWITCH
The assignment switch is used to reverse the operation of the active switch. The MS111 ships from the factory set such that the microphone is on when the switch is in the UP position and the mic is off when the switch is in the DOWN position. You can reverse this if you wish so that the microphone is off when the switch is in the Up position and on when the switch is in the DOWN position. To reverse the switch, find the internal switch on the right side of the MS111 as you are looking at it from the top. Simply move the internal switch to the next position to reverse the operation of the active switch.
WARRANTY
This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installations, use, and service for a period of one (1) year from the date of purchase as shown on the purchaser’s receipt. For complete detailed information regarding Rolls One year Limited Warranty, and to register this product, please visit our website at: www.rolls.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>