KETTLER EBCIM17 NEO Built-In Module Instruction Manual

KETTLER EBCIM17 NEO Built-In Module

Product Information

The EBCIM17 NEO Built-In Module is designed to be used in conjunction with the NEO Outdoor Kitchen and the NEO Beverage Cooler NBC208SS. The product is intended for outdoor use only and should be placed in semi-covered areas, protected from rain and sunlight. The module measures 1140mm in length, 598mm in width, and 950mm in height.

Important Safety Instructions

• Read the assembly instruction section and safety precautions carefully before removing the contents of this carton.
• Do not use this appliance for any purpose other than what it is intended for.
• For your safety and enjoyment, read all operating instructions before assembling this module.
• Regularly maintain your module and keep them in good condition by following the cleaning and maintenance suggestions in thebooklet.
• Do not use or store this appliance in areas of high salt content or an area with caustic fumes or liquids, as these chemicals can cause the appliance materials to deteriorate (and void the warranty).
• The module should be placed on a solid surface hardstanding when in use.
• When fitting the beverage cooler into the module, try to keep the beverage cooler centralized within the module.

Appliance Details

The beverage cooler module measures 1140mm in length, 598mm in width, and 950mm in height. Take care not to block the venting of the beverage cooler at the front of the appliance. Use only with front vented.

Cleaning

Consult the beverage cooler manual for information on cleaning your beverage cooler. Surfaces can be cleaned using a mild household detergent or cleaner and a clean cloth (do not use scourers or harsh detergents). It is advisable to test cleaners on a small section of the appliance first. NEVER use paint thinners or similar solvents for cleaning and NEVER pour cold water over hot surfaces. Dry the surface afterwards. Do NOT use high pressure cleaners or steam cleaners, as this can damage the module surface causing it to break down and lift away. For information on cleaning your beverage cooler, consult the beverage cooler manual. Surfaces can be cleaned using a mild household detergent or cleaner and a clean cloth (do not use scourers or harsh detergents). It is advisable to test cleaners on a small section of the appliance first. NEVER use paint thinners or similar solvents for cleaning and NEVER pour cold water over hot surfaces. Dry the surface afterwards. Do NOT use high pressure cleaners or steam cleaners, as this can damage the module surface causing it to break down and lift away.

Maintenance

It is recommended that, at least once a year, the following maintenance be conducted on the beverage cooler module:

• Clean the condenser coil with a soft brush or vacuum cleaner.
• Clean the interior and exterior of the module with a mild detergent solution.
• Check the door seals for damage and replace if necessary.
• Check the temperature control settings and adjust if necessary.

Product Usage Instructions

Before using the EBCIM17 NEO Built-In Module for NEO Beverage Cooler NBC208SS, read the assembly instruction section and safety precautions carefully. The product is intended for outdoor use only and should be placed in semi-covered areas, protected from rain and sunlight. Follow the assembly and operational instructions of your particular beverage cooler in all ways. When fitting the beverage cooler into the module, try to keep the beverage cooler centralized within the module. Take care not to block the venting of the beverage cooler at the front of the appliance. Use only with front vented. To clean the product, consult the beverage cooler manual. Surfaces can be cleaned using a mild household detergent or cleaner and a clean cloth (do not use scourers or harsh detergents). NEVER use paint thinners or similar solvents for cleaning and NEVER pour cold water over hot surfaces. Dry the surface afterwards.

It is recommended that, at least once a year, the following maintenance be conducted on the beverage cooler module:

• Clean the condenser coil with a soft brush or vacuum cleaner.
• Clean the interior and exterior of the module with a mild detergent solution.
• Check the door seals for damage and replace if necessary.
• Check the temperature control settings and adjust if necessary.

Assembly and Maintenance

Contents

It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference. Due to continual product development, Kettler reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available.

Important Safety Instructions

Important
Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. If you are unsure about anything regarding your built-in module or beverage cooler, please contact your Service Centre before operating the appliance.

1. This beverage cooler module is for semi-covered areas, protected from rain and sunlight only. Follow the assembly and operational instructions of your particular beverage cooler in all ways.
2. Do not use this appliance for any purpose other than what it is intended for.
3. For your safety and enjoyment, read all operating instructions before assembling this module.
4. We recommend that you regularly maintain your module and keep them in good condition. This can be achieved by following the cleaning and maintenance suggestions in this booklet.
5. Do not use or store this appliance in areas of high salt content (a marine environment) or an area with caustic fumes or liquids (such as a domestic pool), as these chemicals can cause the appliance materials to deteriorate (and void the warranty). Take care that the module is positioned in such a way that the beverage cooler is always protected from the elements.
6. The module should be placed on a solid surface hardstanding when in use.
7. When fitting the beverage cooler into the module, try to keep the beverage cooler centralised within the module

Assembly Instructions

Remove all components from the cartons and carefully check against Parts List. Make sure you thoroughly inspect parts before assembly. Some assembly will require the use of a Phillips Drive screwdriver. Kettler recommends that the assembly be done by 2 (or more) people due to the size and weights of the components.
NOTE: The module should be assembled on a clean, flat surface (best protected by cardboard or an old sheet). As the module is extremely heavy (in excess of 90kg) this should be done as close to its final destination as possible.

1. Step 1
   Place rear panel (04) on the ground and right panel (03) up against it so that the screw brackets match up with the screw holes. Fix in place using 2 butterfly screws (7). Note orientation of power cable hole.

2. Step 2
   Repeat step 1 using the left panel (02).

3. Step 3
   Place the front support (05) at the front top of the module between the left and right panels, so the overhang matches up with the side strips and the screw holes match up. Use 4 M4 screws (06) to fix it in place.

4. Step 4
   Carefully lift the top panel (1) and place it centrally over the rest of the module. Align the 3 sets of brackets in the sides & rear of the top panel with those in the module, and fix in place with 3 butterfly screws (7).

5. Step 5
   The module is now finished. Carefully move it close to the final position, and then pass the beverage cooler power cord through the hole at the rear of the module. While supporting the power cord, move the module to its final position. Carefully position the beverage cooler centrally inside the module and follow start-up instructions for the beverage cooler.

For Your Safety

• This product may only be used for its intended purpose at residential properties.

• Check all components regularly for correct function, damage and loose connections especially at the start of the season and at 1-2 month intervals dependent on use.

• Damaged components may endanger your safety or shorten the life of the product. Replace all damaged parts immediately. Use only spare parts manufactured by Kettler.
  Should you wish to purchase spare parts, they can be ordered directly from: www.kettler.co.uk/shop

• Kettler will not be responsible for damaged caused by improper use.

Attention

• Whilst assembling this product keep out of the reach of children. (Choking hazard – contains small parts)
• Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around.
• Always dispose of packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
• We reserve the right to make changes for technical reasons.

Warranty For Home Use

KETTLER barbecues are covered by a 3 YEAR WARRANTY.
The warranty applies to domestic use only and does not cover accidental damage.
No warranty claims can be accepted without a valid proof of purchase.
www.kettler.co.uk

IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR BARBECUE

The symbol indicates that the product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling.

References

• Home - Kettler Official Site
• Shop - Kettler Official Site

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>