Speakers Bracket Wireless Charging Bluetooth Speaker User Manual
- June 3, 2024
- Speakers
Table of Contents
Speakers Bracket Wireless Charging Bluetooth Speaker User Manual
Introduction of rach part
General assembly drawing
Bracket installation drawing
Infrared function part
The Ready’ light flashes to indicate that the machine is in the infrared waiting state, and you can trigger the infrared.
a. When the mobile phone is close to about 4-5cm, it will be triggered. The clips on both sides will be opened and will remain in the opened state for about 2 seconds. At this time, you can put the mobile phone and wait for the clips to be clamped.
b. When you want to take off the mobile phone, please do not use violence to take off the mobile phone directly. Please hold the mobile phone first, and then press the open button. At this time, the clips will open and you can take off the mobile phone.
Wireless charging part
a. When you use a 5V, 2A charger to power the machine, the wireless charging
power is 10W. When you use a 5V, 1A charger to power the machine, the wireless
charging power is 5W. b. The effect distance of wireless charging is about
5mm. If you think charging speed is slower than usual, please use a 5V, 2A
charger to power the machine, and do not use a mobile phone case when
charging. c. If you use the wireless charging receiver to charge the mobile
phone, due to the different performance of the receiver, we do not guarantee
that it can achieve the effect of the original wireless charging receiver of
the mobile phone.
a. When the Bluetooth indicator light is on, it means that the current Bluetooth is turned on and you can connect or play music. When the Bluetooth indicator light is off, it means that the current Bluetooth is off. b. If the bluetooth light is off, you can press the bluetooth button to start the bluetooth, and at the same time, you can also use this button to turn off the bluetooth function. c. Under the premise that the bluetooth indicator is on, you use your mobile phone to search for bluetooth, the name is ‘COMSLAND’ , connect it, when the connection is successful, you can play music and make calls.
**Spreaker part
**
There is a channel on both sides, using 4 ohm 5 watt full-range speakers, the speakers are fully sealed, and the diaphragm is used to enhance the bass effect.
**The call part
**
As the speaker has its own microphone. just press the answer button on the phoneto answer the call.
The bracket part
It is directly a universal ball structure, you can rotate to the direction you want and fix it, the bracket can stretch up and down, you can stretch to a suitable height and fix it. The height range of the stent is about 26-36cm.
Letter of Responsibility
Liability statement
This guarantee is reissued, or you lose it, etc., it will not be remedied, so
please keep it properly. When this product fails during the warranty period
from the date of purchase, we can provide repair services.
-
Provision for free repairs
(Maintenance and transportation costs shall be borne by the company) -
- This product implements a one-year warranty.
- During the guarantee period (within one year after purchase), follow the instructions of the manual to operate normally, and malfunctions occur.
- Please record the purchase information carefully when you purchase and keep it properly.
Failure during the warranty period is within the scope of the free warranty, please send the goods and purchase information to the after-sales department of our company.
- During the warranty period, the following conditions should pay for repairs
(Maintenance and transportation costs shall be borne by you)
A. Failure as not folow the instructions of the manual for proper operation,
management or maintenance problems.
B. The appearance of defects caused by product fading, aging, or wear after
use.
C. Fire, thunder, earthquake, volcanic eruption, flood, tsunami and other
natural disasters. War, riot and destruction and so on.
D. The product fails outside the warranty period.
- Special Note
‘2’ All contents in this manual have been carefully verified, if there are any printing errors or contents , The company reserves the right of final interpretation for any misunderstanding.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>