LABELMATE Epson C60 Rewinder Alignment Plate Instruction Manual
- June 1, 2024
- LABELMATE
Table of Contents
LABELMATE Epson C60 Rewinder Alignment Plate
Specifications
- Alignment Plates: Used to position the printer accurately.
- Printer: Device to be placed between the Alignment Plates.
- Winders: Devices that assist in aligning the printer.
- Measurement: 12.5 mark on the Alignment Plates for positioning.
Arrange Alignment Plates
-
Position the Alignment Plates adjacent to each other with the shaped sides facing inward.
Position Printer -
Set the printer between the Alignment Plates, aligning its feet with the notches in the Plates.
-
Slide the Alignment Plates inward beneath the printer until they press against the printer’s feet.
Position Winders -
Place the Winders firmly in position next to the outer bars of the Alignment Plates.
-
Align the Winders with the printer by sliding them forward/backward as necessary until the front base of the Winders is positioned at the 12.5” mark of the Alignment Plates.
Read User Manual Online (PDF format)
Loading......