LITHONIA LIGHTING FHE-LED-V2 High Pressure Hose Down User Guide
- June 12, 2024
- LITHONIA LIGHTING
Table of Contents
High-Pressure Hose-Down
FHE LED FOOD PROCESSING/ COLD STORAGE
Pictured With Sensor Option
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for use in food and beverage processing, cold
storage and garden centers.
Fiberglass enclosure protects fixture while remaining easy to service and
clean. Not for use or installation in direct outdoor sunlight. Must be
installed under canopy or covered ceiling. For direct sunlight installations,
please refer to the FEX product family. Certain airborne contaminants can
diminish the integrity of acrylic and/or polycarbonate. Click here for
Acrylic-Polycarbonate Compatibility table for suitable uses.
Certain airborne contaminants may adversely affect the functioning of LEDs and
other electronic components, depending on various factors such as
concentrations of the contaminants, ventilation, and temperature at the end-
user location. Click here for a list of substances that may not be suitable
for interaction with LEDs and other electronic components.
CONSTRUCTION — One-piece 5VA rated fiberglass housing with continuous
poured-in-place, closedcell gasket. Three piece captive latches lock onto the
housing to keep latches from becoming displaced during strenuous cleaning.
OPTICS — Injection-molded acrylic, impact-resistant diffuser (.080″ thick),
available in clear or frosted, features side lineal prisms and frosted ends
(clear). Frosted lens recommended for lower mounting heights and enhanced
visual comfort. UV stabilized polycarbonate diffuser option available (.080″
thick) for increased impact resistance.
Three piece stainless steel latches keep lens securely fastened.
ELECTRICAL — Utilizes high-efficiency LEDs mounted to core circuit
boards. High-efficiency drivers operate 120-480 volt offered with 0-10 volt
dimming, allowing granular control when coupled with wireless networking
controls. Luminaire Surge Protection Level: Designed to withstand up to
6kV/3kA per ANSI C82.77-5-2015. Expected service life of 72,000 hours at 80%
lumen maintenance (L80); predicted life of more than 100,000 hours.
INSTALLATION — Luminaire can be surface or suspend mounted. Surface
Mounting requires RMKZP or RMKSS. Power connection is easily accommodated
through pre-drilled holes at each end, watertight plugs ship standard on each
end. Stainless steel mounting straps (standard), included for suspension with
aircraft cable (cable not included). Optional stainless steel V-hooks
available for chain hanging (chain not included).
Mounting straps also accommodate RMKSS or RMKZP accessory for surface
mounting. LISTINGS — CSA Certified to UL and C-UL Standards. Suitable for wet
location. IP65,IP66, IP67 (4ft. only) and IP69k (2ft. only) rated. NSF Splash
Zone 2 and Non-Food Zone rated. NEMA 4X rated. Sensors maintain IP65 and IP66
only. Ambients listed on page 4.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified
product. Not all versionsof this product may be DLC Premium qualified or DLC
qualified. Please check the DLC Qualified Products List at
www.designlights.org/QPL to confirm
which versions are qualified.
BUY AMERICAN ACT — Product with the BAA option is assembled in the USA
and meets the Buy America(n) government procurement requirements under FAR,
DFARS and DOT regulations.
Please refer to www.acuitybrands.com/buy-
american for additional
information.
WARRANTY — 5-year limited warranty. This is the only warranty provided
and no other statements in this specification sheet create any warranty of any
kind. All other express and implied warranties are disclaimed. Complete
warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-
conditions
NOTE: Actual performance may differ as a result of end-user environment
and application. All values are design or typical values, measured under
laboratory conditions at 25 °C. Specifications subject to change without
notice.
Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to
provide consistent color appearance and out-of-the-box control compatibility
with simple commissioning.
- All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
- This luminaire is part of an A+ Certified solution for nLight® or control networks marked by a shaded background
To learn more about A+, visit www.acuitybrands.com/aplus. See ordering tree for details
A+ Capable options indicatedby this color background.
ORDERING INFORMATION
Example: FHE L24 18000LM ACL MD MVOLT GZ10 50K 80CRI Lead times will vary depending on options selected. Consult with your sales representative.
Accessories: Order as separate catalog number.
Mounting Accessories (ships in pairs, order one per fixture):
FHEMHKB Stainless steel V-hook and brackets
FHEEMK End mount suspension bracket
FHERMKZP Rigid mounting bracket, zinc plated
FHERMKSS Rigid mounting bracket, stainless steel
Hanging Accessories (ships in pairs, order as needed):
MHCH36 3′ Double chain ‡
MHHK120 10′ single leg aircraft cable ‡
MHHK120SS 10′ single leg aircraft cable, stainless steel ‡
FHEACT120 10′ Y-toggle aircraft cable
FHEACT240 20′ Y-toggle aircraft cable
FHEACT120SS 10′ Y-toggle aircraft cable, stainless steel
FHEACT240SS 20′ Y-toggle aircraft cable, stainless steel
‡ Option Value Ordering Restrictions
| Option Value | Restriction |
|---|---|
| Color Temperature | The CCT value provided is of lamp source and actual CCT |
will vary upon levels.
CS6616STOW5D| Not available with MSI sensors, NLTAIR RSBOR6 & RSBOR10 (dimming
not available). Not available with PMP4X, WLF, WLFEND2. Not NEMA 4X rated.
CS88,CS88L12, CS88R| Not available with PMP4X, WLF, WLFEND2. Not NEMA 4X
rated.
CS89,CS89L12| Not available with PMP4X, WLF, WLFEND2. Not NEMA 4X rated.
CS93W4C| Only available with El OWLCP & FE14WCP. Not available with PMP4X,
WLF, WLFEND2. Not NEMA 4X rated.
El OWLCP| Utilizes Power Sentry, PS1055LCP emergency driver. Requires SPD
option. Available in 90001m and 120001m 2ft and 18000 and 24000 4ft only. Not
available in HVOLT, 347V, 480V. Not available with 3 conductor cords or plugs.
FE14WCP| Utilizes Fulham, FHS2-UNV-56S emergency driver. Requires SPD option.
Available in 90001m and 120001m 2ft and 18000 and 24000 4ft only. Not
available in HVOLT, 347V, 480V. Not available with 3 conductor cords or plugs.
EMK| Requires WLFEND2.
Individual Controls| Not available in MVOLT or HVOLT. Must specify voltage.
Requires SPD option
MHCH36| For use with MHKB option.
MHHK120, MHHK120SS| For use with EMK or MHKB options.
nLight Wireless| Requires SPD option. Not NEMA 4X rated. Normal luminaires
(non-emergency) can be used as a normal power sensing device for nearby nLight
AIR devices and luminaires with EM emergency options.
PMP4X| Only available with L24.
RMKSS, RMKZP| Required for Surface Mounting.
WLF| Not available with L24. Maintains wet location rating, not NEMA4X rated.
WLFEND| Maintains wet location rating, not NEMA4X rated.
WLFEND2| Not available with cord set, sensor, or photocell options. Maintains
wet location rating, not NEMA4X rated. …._
OPERATIONAL DATA.
DIMENSIONS
Inches (centimeters). Subject to change without notice.
Length| Actual Length| Width| Height| Approximate
weight| Fixtures per pallet| Approximate pallet dimensions (L x W x
H)
---|---|---|---|---|---|---
L24| 26.7in| 14.6251n| 6in| 18Ibs.| 20| 63x16x9
L48| 52in| 14.625in| 6in| 351bs.| 10| 63)(160
CSA LISTED AMBIENT RATING*
| | Surface| Suspended**| E1OLCP Option| FE14WCP Option
---|---|---|---|---|---
L24| 9000LM| 45 C| 55 C| 5 C 30 C| -20-C – 25 C
12000LM| 45°C| 55°C| 5 C- 30″C| -20″C – 30″C
15000LM| 35°C| 50°C| |
18000LM| 35°C| 45°C| |
24000LM| 25°C| 35°C| |
| 18000LM| 25`C| 50°C| 5°C – 25°C| -20 C – 25 C
| 24000LM| 25’C| 45°C| 5°C – 30°C| -20°C – 30°C
148| 28000LM| 25°C| 35°C| |
| 36000LM| 25°C| 40°C| |
| 40000LM| 25°C| 40°C| |
Minimum Ambient is -40°C unless noted
Suspended 18″ from ceiling
Only available in suspended mounting
MOUNTING ACCESSORIES
rSBOR – WET LOCATION, Fixture Mount Sensor (seewww.sensorswitch.com for additional information)
- 360° coverage
- On/Off dim
- Photocell optional
- IP66 rated
- Photocell and 0-10VDC dimming options.
| Fixture sensor nomenclature | SBOR sensor nomenclature |
|---|
For shortest lead times use one of the following SBOR confi gurations
NLTAIR2 RSBOR6| rSBOR 6 EB3 WH G2
NLTAIR2 RSBOR10| rSBOR 10 EB3 WH 62
MS110NWL DSCNWL| SBOR 10 OEX P EB3 WH
COVERAGE PATTERNS
PARKING GARAGE / LOW MOUNT APPLICATIONS
In general, the SBOR 10 is recommended for 8-15 ft (2.44-4.57 m) mounting and
provides a coverage area radius for walking motion of greater than 2x the
mounting height. The SBOR 10 ODP is ideal for parking garage and low pole
mount applications. When mounted 10 ft high, for example, on a luminaire in a
parking garage, the sensor’s coverage for walking motion extends out 30 ft in
a 360º pattern. This closely matches the lighting distribution of a typical
parking garage luminaire. When mounted to a light pole,
for example, in a parking lot or along a path, the sensor provides 270º of
coverage (90º is blocked by the pole).
Note, walking askew to sensor typically results in earlier detection than
walking directly at sensor.
SITE & AREA LIGHTING / HIGH MOUNT APPLICATIONS
The SBOR 6 is intended for higher pole mount applications, between 15-30 ft
(4.57-9.14 m), and provides a coverage area radius for walking motion of 15-20
ft (4.57-6.10 m). When mounted to a pole the sensor provides 270º of coverage
(90º is blocked by the pole).
Lithonia-FHE-Spec Apps Hose Down-L24-L48-Surface – Suspended-LED
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012
Phone: 1-800-705-SERV (7378)
www.lithonia.com TechSupport-
Industrial@AcuityBrands.com
© 2012-2023 Acuity Brands Lighting, Inc.
All rights reserved. Rev. 04/04/23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>