LINDY 38313 2×2 HDMI 8K60 Matrix Switcher User Manual
- June 12, 2024
- LINDY
Table of Contents
LINDY 38313 2×2 HDMI 8K60 Matrix Switcher User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this
document with the product.
Failure to follow these precautions can result in serious injuries or death
from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC For worldwide usability four different AC adapters
are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand
type. Use the appropriate AC adapter as shown in the picture and ensure it is
firmly secured in place and does not detach by pulling before installing into
a power socket. To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
Push the button and rotate anticlockwise to unlock and remove the adapter. To
attach, push and rotate clockwise until the adapter is locked into place.
Introduction
Thank you for purchasing the 2×2 HDMI 8K60 Matrix. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The Lindy 2×2 HDMI 8K60 Matrix is a premium, compact solution for distributing content from multiple two devices to two displays. Dual HDMI inputs provide the ability to switch between 2 separate source devices or 2 connected HDMI displays, or output video simultaneously.
Package Contents
- 2×2 HDMI 8K60 Matrix
- IR Remote Control with CR2025 Battery
- Multi-Country PSU (UK, EU, US & AUS)
- Lindy Manual
Features
- Supports resolutions up to 3840×2160@120Hz 4:4:4 10bit or 7680×4320@60Hz 4:2:0 10bit, with additional support for HDR10 & Dolby Vision
- Supports digital and analogue audio extraction from Output 1
- EDID Management
- Push button & IR control
Specification
- Supported Bandwidth: 40Gbps
- Maximum Resolution: 4096×2160@120Hz 4:4:4 10bit or 7680×4320@60Hz 4:2:0 10bit
- HDCP Support: 2.3
- IR Support: 20 – 60 kHz
- CEC Support: –
- Housing Material: Metal
- Operating Temperature: 0°C – 40°C (32°F – 104°F)
- Storage Temperature: -20°C – 60°C (-4°F – 140°F)
- Humidity: 20 – 90% (non-condensing)
- Colour: Black
- Power Consumption: 6.2W
- ESD Protection: Human Body Model: ±8kV (Air-gap discharge), ±4kV (Contact discharge)
Supported Audio:
-
Sample Rate: 24-bit 192kHz
-
HDMI Audio: Pass-through
Formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD -
TosLink (Optical): Up to 5.1CH
Formats: LPCM2/5.1 CH, Dolby Digital 2/5.1 CH, DTS 2 2/5.1 CH -
3.5mm: PCM 2CH
Connectors:
- Input: 2 x HDMI (Female)
- Output: 2 x HDMI (Female), TosLink (Optical) (Female), 3.5mm (Female)
Product Diagram & Installation
Front Panel
-
IR Window
-
Power – This LED will illuminate green when the unit is switched on or red when on standby
-
Output 1 – The LED of the active Input will light green
-
Output 2 – The LED of the active Input will light green
-
Output 1 Button – Push the Out A button to switch between Input 1 and Input 2 Output 2 Button – Push the Out B button to switch between Input 1 and Input 2
-
EDID Dip Switch – Use the Dip Switch to set the EDID
-
Service – Micro-USB Port for Firmware Updates
Rear Panel
-
Input 1 / 2 – Connect to a HDMI source device
-
Output 1 / 2 – Connect to a HDMI display
-
TosLink (Optical) – Connect to a TosLink (Optical) audio device and extract digital audio from Output 1
-
3.5mm – Connect to 3.5mm audio device and extract audio from Output 1
-
DC 5V – Connect the PSU to power the device
Installation
- Please ensure all devices are switched off before making any connections.
- Connect the source devices such as a PC, Blu-ray player or games console to the HDMI matrix input ports. Then connect the high definition displays to the HDMI matrix output ports. When all the connections are made, connect the power supplies.
- Once all the connections have been made, switch on the devices in this order: displays, HDMI Matrix, source devices. Please allow a few minutes for the devices to handshake and for the signals to appear.
- After changing EDID settings, please power cycle the matrix first. The setup will then use the adjusted EDID settings.
Operation
EDID Dip Switch Management
111- Copy the EDID of OUT1 (factory default)
110- HDMI 1080p@60Hz, Audio 2CH PCM
101- HDMI 4K@60Hz 4:4:4, Audio 2CH PCM, HDR
100- HDMI 4K@60Hz 4:4:4, Audio 5.1CH PCM/DTS/DOLBY, HDR
011- HDMI 4K@60Hz 4:4:4, Audio 7.1CH PCM/DTS/DOLBY/HD, HDR
010- HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 4K@120Hz 4:4:4, Audio 2CH PCM, HDR
001- HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 4K@120Hz 4:4:4, Audio 5.1CH
PCM/DTS/DOLBY, HDR
000- HDMI 8K@60Hz 4:2:0+8K@30Hz 4:4:4, 4K@120Hz 4:4:4, Audio 7.1CH
PCM/DTS/DOLBY/HD, HDR
IR Control
Power – Power the unit on or set to standby.
Output 1 / 2:
- Select Input 1 or 2 to output to Output 1 / 2.
- Switch to the opposing Input from what is currently selected to output to Output 1 / 2. For example, if Input 1 is currently live, push this button to switch to Input 2.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
The following batteries or accumulators are included in this electrical appliance
| Battery Quantity and Type | Chemical System |
|---|---|
| 1 x CR2025 | Coin Cell Lithium Metal |
Information on the safe removal of batteries or accumulators
- Warning: Make sure the battery is completely drained.
- Open the battery cover of the remote control
- Carefully remove the battery or accumulator.
- The battery or accumulator and the device can now be disposed of separately.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. You are cautioned that changes or modification not
expressly approved by the party responsible for compliance could void your
authority to operate the equipment. This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com,
T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
Email: sales@lindy.co.uk,
T: +44 (0)1642 754000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>