PRAXISDIENST Technovit 6091/Easy Accelerator Instructions
- June 12, 2024
- PRAXISDIENST
Table of Contents
PRAXISDIENST Technovit 6091/Easy Accelerator
Product Information
Product Name: Technovit 6091 easy/Beschleuniger
Product Type: Accelerator Coinitiator mixture to reduce polymerization time
Product Description: Technovit 6091 easy/Beschleuniger is a rapid-curing resin on a methyl methacrylate basis supplied in the form of powder and liquid. It is designed to reduce the polymerization time of Technovit 6091 in low outdoor temperatures.
Applications:
- Claw treatment: Immobilisation of claws during inflammatory infections and fixation of claw tips.
- Treatment of bone fractures in large and small animals: Extra-cutaneous Becker splinting, osteosyntheses, transversal fixation by means of Kirschner drill wires for radius-ulna fractures, tibia-fibula fractures, pedal bone fracture, strengthening of dressings.
- Restauration of horse hooves: Technovit Hoofseal is recommended.
Danger Advice: Highly flammable. Harmful by inhalation, in contact with skin, and if swallowed. Irritating to eyes, respiratory system, and skin. The danger of cumulative effects. May cause sensitization by skin contact.
Delivery Units:
- Technovit 6091 Combination package for two applications
- Technovit 6091 Combination package for ten applications
- Technovit 6091 Single package 1000 g powder
- Technovit 6091 Single package 1500 ml liquid, 80 ml liquid
- Technovit 6091 easy Combination package for two applications
- Technovit 6091 easy Combination package for twelve applications
- Technovit 6091 easy Single package 12 x 70 g
Product Usage Instructions
Mixing:
Immediately before use, mix the powder and the liquid in a mixing beaker or directly in a Techno-Shoe. The mixing ratio can be varied to obtain the desired consistency: add more powder to obtain a stiffer dough, or more liquid for a thinner mixture. The mixture is first pourable, then gradually hardens and can be applied with a spatula. As long as the mixture is kneadable, it can be moulded and modelled with lightly greased fingers.
Rule of Thumb for Mixing Ratio: 40 ml liquid (mark in paper cup) to 3 level measuring spoons (70 g) = fluent for 0.5 min. to 3 level measuring spoons (60 g) = fluent for 3 min.
Technovit 6091 easy Mixing: Mix Technovit 6091 easy immediately before use to a ratio of 1:0.6 by weight. Prepare 40 ml liquid in a mixing beaker. Then mix in the total amount of the Sachet 70 g (marking in the mixing beaker).
Claw Treatment: The immobilization of claws during inflammatory infections is effected by fitting a wooden block to the neighboring healthy claw and using Technovit 6091 to bond the diseased claw to it.
Accessories:
- Accelerator 70 ml
- Wooden blocks 5 pieces
- Techno shoe left 10 pieces
- Techno shoe right 10 pieces
User instruction Technovit 6091 easy/accelerator
Accelerator
- Coinitiator mixture to reduce polymerization time of Technovit 6091 by low outdoor temperatures
Material
- A rapid-curing resin on a methyl methacrylate basis supplied in the form of powder and liquid.
Indication
- Claw treatment Immobilization of claws during inflammatory infections Fixation of claw tips.
Treatment of bone fractures, in large and small animals:
- Extra-cutaneous Becker splinting osteosyntheses transversal fixation by means of Kirschner drill wires for radius-ulna fractures, for tibia-fibula fractures, pedal bone fracture, strengthening of dressings.
- For restauration of horse’s houves Technovit Hoofseal is recommended
Properties
- The Technovit dough can be cast and kneaded. The curing time is 4 – 5 min. The cured Technovit 6091 has a nonadhesive surface.
- Technovit is resistant to acids, alkalis and external impurities and can be dissolved in chloroform or acetone. In its liquid and doughy forms, it attacks rubber. Polyethylene and Hostaphan films are not attacked, and can therefore be used for insulating and covering the dough.
- After completion of polymerization, Technovit is hard and abrasion-resistant and can be ground, sawed, drilled, milled, etc.
Processing
Preparation
- The areas which contact Technovit (claw, wooden block, iron) must be free of dust, dry and degreased (chloroform, light petroleum, acetone, etc. can be used for this purpose); the surface must be roughened (for example, with a hoof rasp, drawing knife emery disc). To achieve normal curing times (approx. 4 – 5 min), it may prove practical to cool the mixing vessel and material in summer or in winter or to work with Technovit Accelerator.
Handling
- If the outdoor temperature is +10 °C or more liquid and accelerator should be mixed by the Half volume 35 ml of accelerator liquid with the total volume (500 ml) of Technovit 6091 liquid.
- In case of outdoor temperatures less than + 10 °C, the mixing ratio is 7 1.
Advice
- Crystallising of the accelerator will occur in cold conditions. To reconstitute, warm the accelerator Liquid to approximately 30 – 35 °C for 5 minutes, then shake well. Once the accelerator and the Technovit 6091 liquid are mixed, the crystallising will not occur.
Mixing
- Immediately before use, mix the powder and the liquid in a mixing beaker or directly in a Techno-Shoe. The mixing ratio can be varied to obtain the desired consistency: add more powder to obtain a stiffer dough, or more liquid for a thinner mixture. The mixture is first pourable, then gradually hardens and can be applied with a spatula. As long as the mixture is kneadable, it can be moulded and modelled with lightlygreased fingers.
- Rule of thumb for mixing ratio 40 ml liquid (mark in paper cup) to 3\ level measuring spoons (70 g) = fluent for 0.5 min. to 3 level measuring spoons (60 g) = fluent for 3 min.
- Mixing Technovit 6091 easy
- Mix Technovit 6091 easy immediately before use to a ratio 1: 0.6 by weight. Prepare 40 ml liquid in a mixing beaker. Than the mix in the total amount of the Sachet 70 g. (Marking in the mixing beaker)
Curing
- The curing process begins when the powder and liquid are mixed. The process can be accelerated by heating or delayed by cooling, but not interrupted. Heat is generated during curing. The resultant temperature depends on the quantity of Technovit.
- To eliminate the possibility of tissue damage, the plastic can be sprayed with cold water until it has hardened.
- The plastic can be cut with a hot spatula (caution flammable!). Openings made in this way can be simply and permanently closed with freshly-mixed material.
- The plastic is mechanically removed with suitable tools (pincers, hammer) when the healing process is complete.
Applications
Claw treatment:
- The immobilisation of claws during inflammatory infections is effected by fitting a wooden block to the neighbouring healthy claw and using Technovit 6091 to bond the diseased claw to it.
Bone Treatment:
- To fix the fractured ends in their original position until healing is completed, the ends of the bone are connected by percutaneous bone screws (Becker) or Kirschner drill wires and individually shaped bridge splints of Technovit 6091. The advantage here is the favourably low weight for srnall domestic animals and the possibility of correcting the positioning of the fragments before the callous has hardened (by separation and renewed bonding over the length which is necessary to ensure bone healing).
Danger advice
- Highly flammable. Harmful by inhalation, in contact with skin and if swallowed. Irritating to eyes, respiratory system and skin.
- Danger of cumulative effects. May cause sentization by skin contact.
Safety advice
- Keep container tightly closed and in a well-ventilated place.
- Wear suitable protective clothing and gloves. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep away from sources of ignition – No smoking. After contact with skin, wash immediately with plenty of soap and water. This material and its container must be disposed of as hazardous waste.
Storage advice
- Do not store the material above 25 °C. Store container tightly closed and in a well ventilated room. Do not use the material after expiry date. Keep out of reach of children.
- Delivery units
- Technovit 6091
- Combination package for two applications
- Combination package for ten applications
- Single package 1000 g powder
- Single package 1500 ml liquid, 80 ml liquid
- Technovit 6091 easy
- Combination package for two applications
- Combination package for twelve applications
- Single package 12 x 70 g
Accessories
- Accelerator 70 ml
- Wooden blocks 5 pieces
- Techno shoe left 10 pieces
- Techno shoe right 10 pieces
Heraeus Kulzer GmbH & Co. KG
Philipp-Reis-Straße 8/13
D-61273 Wehrheim/Ts.
Telefon (0 60 81) 9 59-0
Telefax (0 60 81) 9 59-398
e-mail:technik.wehrheim@heraeus.com
Internet:www.Kulzer-Technik.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>