DeLOCK 1D Industrial Barcode Scanner User Guide

DeLOCK 1D Industrial Barcode Scanner

Product Information

The Delock Industrial Barcode Scanner is a wireless scanner that can be connected to a PC, laptop, mobile phone, or tablet. It can capture both 1D and 2D barcode types even at long distances and can recognize barcodes displayed on displays and monitors. The scanner has an automatic adaptation to ambient brightness and can capture up to 120 scans per second. It is sturdy in design and can absorb falls of up to 1.80 m, making it ideal for use in industrial environments. The scanner comes with an inductive charging station that also functions as both a Bluetooth and a 433 MHz interface and is connected to the system via a USB cable.

Product Specifications

• Frequency band(s): 2402 – 2480 MHz
• Maximum radio-frequency power transmitted: 1.28 mW EIRP
• Battery guideline (2006/66/EC)
• CE symbol compliant with RED directive (2014/53/EU) and RoHS directive (2011/65/EU+2015/863+2017/2102)

Important Safety Instructions

• The built-in battery is recyclable. Please dispose of it by using the battery container or dealer. Dispose of the empty battery to guarantee environmental protection.
• When charging the scanner’s battery, place the scanner in the charging station.

Safety instructions

• Protect the product against moisture
• Protect the product against direct sunlight
• Do not look directly into the LED diode of the scanner

Product Usage Instructions

• To activate the scanner, scan a barcode.
• To establish a Bluetooth connection, scan a barcode that will initiate the connection.
• If the scanner successfully reads a configuration barcode, it will emit two short beeps.
• If the Bluetooth connection is disconnected, the scanner will emit two long beeps.
• If the scanner reads a barcode although it is not connected, it will emit one long beep.
• If the scanner reads an unexpected barcode during configuration, scan [ABORT] to cancel and restart.
• If the scanner is out of range or has a bad connection, it will emit two long beeps and seven short beeps.

Description

This barcode scanner by Delock can be wirelessly connected to a PC, laptop or directly to a mobile phone or tablet. All common 1D and 2D barcode types can be precisely captured even at long distances. Additionally, the scanner recognizes barcodes displayed on displays and monitors.
Automatic adaptation to ambient brightness
The scanner automatically adapts to the ambient brightness and captures up to 120 scans per second under optimal lighting conditions.
In low ambient brightness, the barcode is illuminated by an additional white LED and can therefore also be used in poor lighting conditions.
Sturdy processing
Due to its sturdy design, the scanner can easily absorb falls of up to 1.80 m and is therefore ideally suited for use in industrial environments.
Charging station acts as interface
The data transfer of the scanned barcodes is done either via Bluetooth or via the 433 MHz frequency band. In addition to charging the hand scanner, the scanner’s inductive charging station also functions as both a Bluetooth and a 433 MHz interface and is connected to the system via a USB cable.

Specification

Charging station

• Connector: 1 x USB 2.0 Type-A male
• Input voltage: 5 V
• Current consumption:
  • operation: max. 1100 mA
  • standby: max. 700 mA
• Operating temperature: -20 °C ~ 50 °C
• Storage temperature: -40 °C ~ 70 °C
• Relative humidity: 5 – 95 % (non condensing)
• Colour: black
• Weight: ca. 295 g
• Dimensions (LxWxH): ca. 180 x 100 x 75 mm
• Cable length without connectors: ca. 1.25 m
• Bluetooth standard V 4.1
• 2.4 GHz

Barcode scanner

• Decoding chip: ARM Cortex 32 Bit
• Rechargeable battery: Li-Polymer battery 1800 mAh
• Resolution: max. 1280 x 800
• Trigger: scan button
• Reading distance: ca. 30 mm to 500 mm
• Reading accuracy: 3 – 4 mil
• Range:
  • Bluetooth: up to 10 m
  • 433 MHz: up to 100 m
• Internal memory: 16 MB
• Light colour: visible LED red
• Compensation light: LED white
• Sensor: CMOS image sensor
• Scan rate: up to 120 scans per second
• Scan angle : 55°
• Surrounding brightness: max. 100000 Lux
• Input voltage: 5 V
• Current consumption:
  • operation: max. 220 mA
  • standby: max. 20 mA
• Operating temperature: -20 °C ~ 50 °C
• Storage temperature: -40 °C ~ 70 °C
• Relative humidity: 5 – 95 % (non condensing)
• Colour: black/yellow
• Weight: ca. 321 g
• Dimensions (LxWxH): ca. 185 x 100 x 80 mm
• Scancodes:
  • Code 128
  • Code 39
  • Interleaved 2 of 5
  • EAN-8 / EAN-13
  • ISBN – 13
  • Data Matrix
  • Micro PDF417
  • Micro QR
  • PDF417
  • QR Code

System requirements

• Android 11.0 or above
• Bluetooth standard 4.1 or above
• iPad Pro (3rd Generation) or above
• Mac OS 11.6 or above
• Windows 8.1/8.1-64/10/10-64/11
• PC or laptop with a free USB Type-A port for dongle

Package content

• Barcode scanner
• Charging cradle
• User manual

Battery charging

You can charge the scanner’s battery using the charging station. To do this, place the scanner in the device.

Beep sounds

Reset scanner to factory settings

Connect with Bluetooth
To connect the device to Bluetooth, start the scanner and press and hold the yellow button for 8 seconds. A vibration and a beep indicate that the scanner is now ready for connection. Scan the barcode below and turn on the Bluetooth on your smartphone, notebook or tablet.

Now connect to “Barcode Scanner HID”. If the connection was successful, you will hear a short tone.

Change name of Scanner
You have the possibility to change the name of the scanner via Bluetooth. You need to generate a name in advance using a barcode generator with the help of the barcode.

Scan the barcode below:

Then scan the barcode you generated to change the name of the scanner. If you select the code from the example below, the name of the scanner changes to “Scanner 123”.

With the following barcode you can fix the name of the scanner

To change the name permanently, you need to turn off the Bluetooth completely, remove the device from the list, reconnect and add the device again.

Hide keyboard (iOS)
With the code below you can enter the menu to activate or hide the keyboard of your IOS device. This code below allows you to move up and down the keyboard.

Sound and vibration setting

Connect via 433 MHz
Alternatively to Bluetooth, you can connect the scanner to your system via the 433 MHz frequency band.

Then plug the cable into the USB socket provided for this purpose. If the connection was successful you will hear a beep. The blue light shines continuously Attention: if the scanner enters the matching state and does not successfully pair up within 1 minute, a double beep is displayed indicating a mismatch and returns to scan mode.

Set standby time

Change language
The following keyboard languages are only valid for the output via American keyboard.

If you want to use the German keyboard, please scan the following barcodes in sequence in point: Change Code System – Output German Language

Settings End characters

Transmission speed
Select the appropriate transmission speed according to the PC reception speed.

If not set otherwise, the scanned barcodes are displayed directly on the output device.

Data transfer from the save mode
If you are outside the transmission range to your Bluetooth device, the scanned codes are automatically stored in the internal memory. If the internal memory is full, you will hear three short beeps.

Please make sure that you are in the reception area of your USB device and that an ideal connection has been established. Otherwise, please use the enclosed USB cable for data transfer.

Change Code System – Output German Language

The following codes can be used to switch between UTF-8 and GBK protocol. To switch to GBK mode, please scan the following codes in sequence.

GBK for PC

GBK for iOS

To switch to UTF-8 mode, please scan the following codes in sequence.
UTF-8 for PC

UTF-8 for iOS

Overview of different GBK Codes

QR Code
Output in German: Dies ist ein Test QR Code für ÜÄÖ und Z

Data Matrix
Output in German: Dies ist ein Data Matrix Test Code für ÜÄÖ und Z

Atztec
Output in German: Dies ist ein Atztec Test Code für ÜÄÖ und Z

PDF417
Output in German: Dies ist ein PDF417 Test Code für ÜÄÖ und Z

Code128
Output in German

Overview of UTF-8 Code

Mobile QR Code
Output in German: Dies ist ein Mobile QR Test Code für ÜÄÖ und Z

APPENDIX

Declaration of conformity

Products with a CE symbol fulfill the RED directive (2014/53/EU) and RoHS directive (2011/65/EU+2015/863+2017/2102), which were released by the
EU-comission.
The declaration of conformity can be downloaded here: https://www.delock.de/produkte/G_90586/merkmale.html
Frequency band(s ): 2402 – 2480 MHz
Maximum radio-frequency power transmitted: 1.28 mW EIRP

WEEE-notice

The WEEE (Waste Electrical and Electronic Equipment)-directive, which became effective as European law on February 13th 2003, resulted in an all out change in the disposal of disused electro devices. The primarily purpose of this directive is the avoidance of electrical waste (WEEE) and at the same time the support of recycling and other forms of recycling in order to reduce waste. The WEEE-logo on the device and the package indicates that the device should not be disposed in the normal household garbage. You are responsible for taking the disused electrical and electronical devices to a respective collecting point. A separated collection and reasonable recycling of your electrical waste helps handling the natural resources more economical. Furthermore recycling of electrical waste is a contribution to keep the environment and thus also the health of men. Further information about disposal of electrical and electronical waste, recycling and the collection points are available in local organizations, waste management enterprises, in specialized trade and the producer of the device.

Battery guideline (2006/66/EC)
The built in battery is recyclable. Please dispose of it by using the battery container or dealer. Just dispose of the empty battery to gurantee the environmental protection.

EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany

Support Delock
If you have further questions, please contact our customer support [email protected]
You can find current product information on our homepage: www.delock.com.
Final clause
Information and data contained in this manual are subject to change without notice in advance. Errors and misprints excepted.
Copyright
No part of this user’s manual may be reproduced, or transmitted for any purpose, regardless in which way or by which means, electronically or mechanically, without explicit written approval of Delock.

www.delock.com

References

• Delock Produkte 90586 Delock Industrie Barcode Scanner 1D und 2D für 433 MHz oder Bluetooth mit induktiver Ladestation

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>