LAMAX Dots3 ANC True Wireless Headphones User Guide

: June 12, 2024
: LAMAX

Table of Contents

LAMAX Dots3 ANC True Wireless Headphones
Product Information
Product Usage Instructions
OVERVIEW
Controls
Switching on
Switching off
ANC and Transparency mode
Charging
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LAMAX Dots3 ANC True Wireless Headphones

Product Information

The product is called Dots3 ANC. It consists of a pair of wireless earphones with active noise cancellation (ANC) feature. The earphones have LED notification lights, a multifunction button, and a built-in microphone for calls.

Product Usage Instructions

Switch on: To switch on the earphones, hold down the multifunction button for 5 seconds. An audible notification will sound.
Switch off: The earphones automatically switch off when inserted into the charging station. To switch off manually, hold down the multifunction button for 5 seconds. An audible notification will sound.
Pairing:

1. Remove the earphones from the charging station. They will automatically connect to each other.
2. Switch on Bluetooth on your device and search for “LAMAX Dots3 ANC” in the list of available Bluetooth devices.
3. After successful pairing, an audio notification will sound and the LEDs in both earphones will turn off.
4. If there are pairing problems, remove the earphones from the list of paired devices on your phone. Insert the earphones into the charging station. Press the multifunction button on both earphones simultaneously five times. The LEDs on both earphones will flash white five times. Then pair them as described in step 1.

Charging:
- To charge the charging station, plug the USB-C cable into the USB-C port on the back of the charging station. Connect the other end of the cable to a USB power supply with a maximum input voltage of 5V and current of 2A. The LED will flash white when charging and glow white when fully charged.
- To charge the earphones, insert them into the charged charging station. The LED on the charging station will light red for 4 seconds. The LED in the earphones will glow red while charging and turn off when fully charged.

Specifications:

Wireless technology: Bluetooth
Max. pairing distance: Not specified
Supported codecs: Not specified
Earphones battery capacity: Not specified
Charging station battery capacity: Not specified
Playback time: Not specified
Charging time of earphones: Not specified
Charging time of charging station: Not specified
Weight of one earphone: Not specified
Weight including charging station: Not specified

OVERVIEW

LED notification
Multifunction button
Microphone

Controls

Switch on Hold down the multifunction button for 5 seconds
Switch off Hold down the multifunction button for 5 seconds
Play / Pause Tap the multifunction button
Volume up Double tap the multifunction button on the right earphone
Volume down Double tap the multifunction button on the left earphone
Next song Hold down the multifunction button on the right earphone for 3 seconds
Previous song Hold down the multifunction button on the left earphone for 3 seconds
Answer call Tap the multifunction button
End call Hold down the multifunction button for 1 second
Reject a call Hold down the multifunction button for 2 seconds
ANC on / ANC off /Transparency modes
Triple tap the multifunction button on the right earphone
Music / Game mode Triple tap the multifunction button on the left earphone
Activate mobile assistant 4× taps on the multifunction button

Switching on

The earphones automatically switch on when removed from the charging station. To switch on manually, hold the multi-function button for 5 seconds. An audible notification sounds when switching on.

Switching off

The earphones automatically switch off when inserted into the charging station. To switch off manually, hold the multi-function button for 5 seconds. An audible notification will sound when switching off.

Pairing

Remove the earphones from the charging station. The earphones will automatically connect to each other. One of the earphones will be the master and ready for pairing, this is indicated by a white flash. The other earphone will glow white.
Switch on Bluetooth on your device and search for LAMAX Dots3 ANC in the list of available Bluetooth devices. After successful pairing, an audio notification will sound. The LEDs in both earphones will turn off.
If there are problems with pairing, remove the earphones from the list of paired devices on your phone. Insert the earphones into the charging station. Press the multi-function button on both earphones simultaneously five times. The LEDs on both earphones will flash white five times. Then pair them as described in step 1.

ANC and Transparency mode

Mode order:

ANC off – switching off of active noise cancellation. Standard music mode.
ANC on – switching on of active noise cancellation.
Transparency mode – amplification of ambient sounds thanks to microphones in the earphones.

Charging

To charge the charging station, plug the cable into the USB-C port on the back of the charging station and plug the other end of the cable into a USB power supply with a maximum input voltage of 5V and current of 2A. The LED will flash white when charging. When fully charged, it will glow white. If the charging station is discharged, the LED will flash red for 4 seconds.
Before using for the first time, be sure to remove the transparent protection film on the charging pins from the inside of both earphones.
To charge the earphones, insert them into the charged charging station, the LED on the charging station will light red for 4 seconds.
When charging, the LED in the earphones will glow red. When fully charged, the LEDs will glow white for 30 seconds, then turn off.