TORO SPRAYS User Guide
- June 4, 2024
- Toro
Table of Contents
TORO SPRAYS
FEATURES & BENEFITS
Zero Flush Wiper Seal
The elimination of flushing on pop-up allows for more sprinklers to be
installed per zone.
Patented X-Flow® Technology
The X-Flow in-stem flow shut-off device is built into the riser and restricts
water loss by 99% should the nozzle be removed or damaged. The exclusive
X-Flow device greatly reduces water waste, landscape erosion, and wet
hardscape safety concerns. Furthermore, X-Flow allows for ‘dry’ nozzle and
filter replacement or system maintenance while the system is running.
One-Piece Check Valve (570CV)
Pre-installed from the factory or easily installed in the field, Toro’s one-
piece check valve prevents low-head drainage on elevation changes of up to 10
feet.
Ratcheting Riser
Quick and precise arc adjustment on all pop-up models.
Options Available
- Serviceable Check Valve (570CV) prevents low-head drainage on elevation changes of up to 10 feet (not compatible with Side Inlet or Shrub models)
- Replacement Zero-Flush seal (570SEAL)
- Effluent water indicators:
- Effluent Shrub Adapter (102-1231)
- Effluent snap-on cap cover (89-9752)
- Effluent Cap with seal (102-1211)
- 6” Riser Extender (570-6X)
- 6” Stationary Riser (570-SR-6) [1/2” male-threaded inlet]
- 18” Stationary Riser (570-SR-18) [1/2” male-threaded inlet]
- Riser Pull-up Tool (89-6395)
- Nozzle Adjustment Key (89-7350)
PRODUCT HIGHLIGHT
Enhanced Zero Flush Seal
No Water Wasted at System Start System start up is a critical time when water
waste can occur. The Toro 570Z Series spray head’s wiper seal is pressure-
activated and prevents flow-by at start up, meaning no water is wasted and
more heads can be installed on the same line.
Patented X-Flow® Shut-off Device
X-Flow® Technology Cuts Off Water Waste Up to 40 gallons of water per minute
can escape through a spray head that has a missing or damaged nozzle. This
wasted water can lead to landscape erosion, property damage, or unsafe
conditions due to wet hardscapes. The patented X-Flow device is factory-
installed in the riser and holds back over 99% of the water that would
otherwise be wasted in cases where the nozzle has been compromised through
unintentional accidents or vandalism. Furthermore, X-Flow Technology allows
for spray head maintenance or component replacement without the need to turn
off the system.
Pressure Regulator
Reliability thanks to Built-in Pressure Regulation Toro’s factory-installed
pressure regulator eliminates water misting and fogging at the nozzle that can
lead to rapid evaporation or water being blown away from the intended
irrigation area. From the first to the last head, the in-stem pressure
regulator provides a steady outlet pressure of 30 PSI and consistent spray
head performance across the zone.
SPECIFICATIONS
Operational
- Radius: 2 feet to 26 feet
- Operating pressure range: 20-75 psi (15-75 psi for Low Pressure models)
- Recommended operating pressure for spray nozzles: 30 psi
- Recommended operating pressure for rotating nozzles: 45 psi
- Flow rate: 0.5 – 4.5 gpm
Dimensions
- Body diameters:
- 13/8” on 2”, 3”, 4”, 6” and 6” Side Inlet
- 15/8” on 12”
- 13/4” on 12” Side Inlet
- Cap diameter: 2”
- Inlet thread: 1/2” Female
- Side inlet location: 43/4” (measured from the top of spray head to center of the side inlet port)
Warranty
- Five years on all models
MODELS
570Z & 570ZLP
- 570S Shrub Adapter
- 570Z-2P 2” Spray Head
- 570Z-2LP 2” Spray Head, Low Pressure
- 570Z-3P 3” Spray Head
- 570Z-3LP 3” Spray Head, Low Pressure
- 570Z-4P 4” Spray Head
- 570Z-4LP 4” Spray Head, Low Pressure
- 570Z-6P 6” Spray Head
- 570Z-6LP 6” Spray Head, Low Pressure
- 570Z-6SI 6” Spray Head, Side Inlet body
- 570Z-6LPSI 6” Spray Head, Low Pressure, Side Inlet body
- 570Z-12P 12” Spray Head
- 570Z-12LP 12” Spray Head, Low Pressure
- 570Z-12SI 12” Spray Head, Side Inlet body
- 570Z-12LPSI 12” Spray Head, Low Pressure, Side Inlet body
- 570Z-4P-COM 4” Spray Head with Check Valve
- 570Z-6P-COM 6” Spray Head with Check Valve
- 570Z-12P-COM 12” Spray Head with Check Valve
570ZXF
- 570S-XF Shrub Riser with X-Flow
- 570Z-4P-XF 4” XF Spray Head
- 570Z-6P-XF 6” XF Spray Head
- 570Z-6SI-XF 6” XF Spray Head, Side Inlet Body
- 570Z-12P-XF 12” XF Spray Head
- 570Z-12SI-XF 12” XF Spray Head, Side Inlet Body
- 570Z-4P-XFCOM 4” XF Spray Head with Check Valve
- 570Z-6P-XFCOM 6” XF Spray Head with Check Valve
- 570Z-12P-XFCOM 12” XF Spray Head with Check Valve
570ZPR
- 570S-PR PR Shrub Riser
- 570Z-4P-PR 4” PR Spray Head
- 570Z-6P-PR 6” PR Spray Head
- 570Z-12P-PR 12” PR Spray Head
- 570Z-4P-PRCOM 4” PR Spray Head with Check Valve
- 570Z-6P-PRCOM 6” PR Spray Head with Check Valve
- 570Z-12P-PRCOM 12” PR Spray Head with Check Valve
570ZPRX
- 570S-PRX PRX Shrub Riser
- 570Z-4P-PRX 4” PRX Spray Head
- 570Z-6P-PRX 6” PRX Spray Head
- 570Z-6SI-PRX 6” PRX Spray Head, Side Inlet Body
- 570Z-12P-PRX 12” PRX Spray Head
- 570Z-12SI-PRX 12” PRX Spray Head, Side Inlet Body
- 570Z-4P-PRXCOM 4” PRX Spray Head with Check Valve
- 570Z-6P-PRXCOM 6” PRX Spray Head with Check Valve
- 570Z-12P-PRXCOM 12” PRX Spray Head with Check Valve
Specifying Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>