partyrent com 1817 Cool Display Case with 2 Flaps User Manual
- June 12, 2024
- partyrent com
Table of Contents
User manual 1817 Cool display case with 2 flaps
L120W47H52 cm
Safety instructions:
- Do not place the device in the immediate vicinity of flammable objects.
- Place the device on a flat and horizontal surface.
- Never cover the entire device or the ventilation openings during use.
- Never leave the powered device turned on unattended.
- Make sure that the mains plug and all electrical components (if not designed for this purpose) do not come into contact with water.
- Always have electrical installations commissioned by a specialist.
- Local regulations and standards must be observed during installation.
- Do not use devices with a damaged power cord.
- Never disconnect the mains connection by pulling the cable. So always grab the plug to disconnect the mains connection.
- Some parts of the device may become hot during use.
- Only transport the device when it is switched off.
Switch on:
- Connect the device to the power source (16A, 230V).
- Switch on cooling (select temperature with SET key and arrow keys)
- Device is ready for use after a pre-cooling time of 5 – 15 minutes
Switch off:
- Switch off the device and disconnect it from the power source
Berlin
Documents / Resources
|
partyrent com 1817 Cool Display Case with 2
Flaps
[pdf] User Manual
1817 Cool Display Case with 2 Flaps, 1817, Cool Display Case with 2 Flaps,
Cool Display Case, Display Case, Case
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>