partyrent com 1739 Industrial Burner User Manual
- June 12, 2024
- partyrent com
Table of Contents
partyrent com 1739 Industrial Burner
Product Information
The 1739 Industrial burner is a powerful and efficient device designed for various industrial applications. With dimensions of L60W60H72 cm, this burner is compact and easy to install in any workspace. It operates on a power source of 16A and 230V, ensuring optimal performance.
Product Usage Instructions
-
To switch on the burner, follow these steps:
-
Connect the device to the power source using a 16A, 230V power supply.
-
Switch on the device.
-
Select the desired temperature level by using the selector switch.
-
To switch off the burner, follow these steps:
-
Switch off the appliance.
-
Allow the burner to cool down before any further handling.
-
Disconnect the device from the power source.
Note: Always ensure that the burner has cooled down before switching it off or disconnecting it from the power source to prevent any potential hazards.
Safety instructions
- Do not place the device in the immediate vicinity of flammable objects.
- Place the device on a flat and horizontal surface.
- Never cover the entire device or the ventilation openings during use.
- Never leave the powered device turned on unattended.
- Make sure that the mains plug and all electrical components (if not designed for this purpose) do not come into contact with water.
- Always have electrical installations commissioned by a specialist.
- Local regulations and standards must be observed during installation.
- Do not use devices with a damaged power cord.
- Never disconnect the mains connection by pulling the cable. So always grab the plug to disconnect the mains connection.
- Some parts of the device may become hot during use.
- Only transport the device when it is switched off.
Switch on:
- Connect the device to the power source (16A, 230V).
- Switch on and select the desired temperature level with the selector switch
Switch off:
- Switch off the appliance and let it cool down
- Disconnect the device from the power source