partyrent com 1883 Heating Bridge User Manual
- June 12, 2024
- partyrent com
Table of Contents
Product Information
The 1883 Heating Bridge with T-legs stand is a versatile heating solution designed to provide even heat distribution for various applications. It is equipped with a T-legs stand for stability and support during use.
Key Features:
- Provides even heat distribution
- T-legs stand for stability
- Versatile for various applications
Product Usage Instructions
- Place the 1883 Heating Bridge on a flat and stable surface.
- Ensure that the T-legs stand is securely attached to the bridge.
- Connect the power cord to a suitable power outlet.
- Adjust the temperature settings according to your requirements using the control panel.
- Wait for the heating bridge to reach the desired temperature.
- Once the heating bridge is heated, place the object or material you want to heat on top of it.
- Monitor the heating process and make necessary adjustments to temperature settings if needed.
- After use, turn off the heating bridge and unplug it from the power outlet.
- Allow the heating bridge to cool down before storing or moving it.
Note: Please refer to the complete user manual for detailed safety guidelines and maintenance instructions.
Safety instructions:
- Do not place the device in the immediate vicinity of flammable objects.
- Place the device on a flat and horizontal surface.
- Never cover the entire device or the ventilation openings during use.
- Never leave the powered device turned on unattended.
- Make sure that the mains plug and all electrical components (if not designed for this purpose) do not come into contact with water.
- Always have electrical installations commissioned by a specialist.
- Local regulations and standards must be observed during installation.
- Do not use devices with a damaged power cord.
- Never disconnect the mains connection by pulling the cable. So always grab the plug to disconnect the mains connection.
- Some parts of the device may become hot during use.
- Only transport the device when it is switched off.
Switch on:
- Connect the device to the power source (16A, 230V).
- Choose desired temperature between Hi and Lo; infinitely adjustable
Switch off:
1. Switch off the device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>