partyrent com 400V-4kW-16A Pizza Oven Quattro User Manual
- June 12, 2024
- partyrent com
Table of Contents
partyrent com 400V-4kW-16A Pizza Oven Quattro
Product Information
The 1794 Pizza Oven Quattro is a high-performance oven designed for baking pizzas. It operates on a power supply of 400V with a power consumption of 4kW and requires a 16A electrical connection. The oven provides separate controls for adjusting the temperature of the top and bottom heating elements, allowing you to achieve the perfect pizza crust.
Product Usage Instructions
To switch on the oven, follow these steps:
- Connect the oven to a power source with a 16A, 400V electrical supply.
- Select the desired temperature for both the top and bottom heating elements.
- The oven is ready for use when the indicator light turns off.
To switch off the oven, follow these steps:
- Switch off the appliance.
- Allow the oven to cool down before further handling or cleaning.
- Disconnect the oven from the power source.
Ensure proper safety precautions while handling the oven, and always refer to the user manual for detailed instructions and safety guidelines.
Safety instructions
- Do not place the device in the immediate vicinity of flammable objects.
- Place the device on a flat and horizontal surface.
- Never cover the entire device or the ventilation openings during use.
- Never leave the powered device turned on unattended.
- Make sure that the mains plug and all electrical components (if not designed for this purpose) do not come into contact with water.
- Always have electrical installations commissioned by a specialist.
- Local regulations and standards must be observed during installation.
- Do not use devices with a damaged power cord.
- Never disconnect the mains connection by pulling the cable. So always grab the plug to disconnect the mains connection.
- Some parts of the device may become hot during use.
- Only transport the device when it is switched off.
Switch on:
1. Connect the device to the power source (16A, 400V).
2. Select the temperature for top and bottom heat (appliance is ready for use
when the indicator light is off)
Switch off:
1. Switch off the appliance and let it cool down
2. Disconnect device from power source