partyrent 1769 Ice Cube Maker 3.75 kg Per Hour User Manual
- June 12, 2024
- partyrent
Table of Contents
partyrent 1769 Ice Cube Maker 3.75 kg Per Hour
Product Information
The 1769 Ice Cube Maker is a compact and efficient device that can produce approximately 3.75 kg of ice cubes per hour. It is designed to provide a convenient solution for users who require asteady supply of ice cubes for their personal or commercial use. With its easy-to-use features, this ice cube maker is perfect for various settings, including homes, offices, cafes, and small businesses.
Product Usage Instructions
- Switch on:
- Connect the device to a power source with a 16A, 230V electrical connection.
- Ensure proper water supply and drainage connections are made.
- Pour approximately 1.5 – 2 liters of water behind the slats of the device.
- Switch on the device to start the ice cube making process.
- Switch off:
- Disconnect the device from the power source.
- Disconnect the water supply and drainage connections.
- Empty the device completely by removing any remaining ice cubes or water.
Please refer to the detailed user manual for additional information on maintenance, cleaning, and troubleshooting.
Safety instructions
- Do not place the device in the immediate vicinity of flammable objects.
- Place the device on a flat and horizontal surface.
- Never cover the entire device or the ventilation openings during use.
- Never leave the powered device turned on unattended.
- Make sure that the mains plug and all electrical components (if not designed for this purpose) do not come into contact with water.
- Always have electrical installations commissioned by a specialist.
- Local regulations and standards must be observed during installation.
- Do not use devices with a damaged power cord.
- Never disconnect the mains connection by pulling the cable. So always grab the plug to disconnect the mains connection.
- Some parts of the device may become hot during use.
- Only transport the device when it is switched off.
Switch on
- Connect the device to the power source (16A, 230V).
- Connect water supply and drainage
- Pour approximately 1,5 – 2 L of water behind the slats
- Switch on the device
Switch off:
- Disconnect the device from the power source, and from water supply and drainage
- Empty the device completely
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>