ODLC-45 Series Mean Well LED Driver LED Lighting Owner’s Manual

ODLC-45 Series Mean Well LED Driver LED Lighting Owner’s Manual

Features

• Constant Current mode output
• Flicker free design
• Plastic housing with class Il design
• Built-in active PFC function
• No load power consumptionQ.5W(Blank-Type), Standby power consumptionQ.5W(DA-Type)
• IP67 rating for indoor or outdoor installations
• Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output; DALI
• 3 years warranty

Applications

• LED panel lighting
• LED flood lighting
• Indoor LED lighting

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTlN.aspx

Description

ODLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with flicker free design.ODLC-45 operates from and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless design, the entire series is able to operate for -200C case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLC-45 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.

Model Encoding

SPECIFICATION

Block Diagram

DRIVING METHODS OF LED MODULE

※ This series works in constant current mode to directly drive the LEDs.

DIMMING OPERATION

※ 2 in 1 dimming function
‧Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal.
‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.

◎ Applying additive 0 ~ 10VDC

◎ Applying additive 10V PWM signal (frequency range 300Hz ~ 3KHz):

※ DALI Interface (primary side; for DA-Type)

• Apply DALI signal between DA+ and DA-.
• DALI protocol comprises 16 groups and 64 addresses.
• First step is fixed at 8% of output.

Note :

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.

OUTPUT LOAD vs TEMPERATURE

STATIC CHARACTERISTIC

※De-rating is needed under low input voltage.

POWER FACTOR (PF) CHARACTERISTIC

EFFICIENCY vs LOAD

MECHANICAL SPECIFICATION

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>