FAE-i53Pro TWS Truly Wireless Stereo Headphones Quick Start Guide

June 8, 2024
Headphones

Quick Start Guide

FAE-i53Pro TWS Truly Wireless Stereo Headphones

FAE-i53Pro TWS Truly Wireless Stereo Headphones

Please read and retain all safety and usage instructions.

Safety instructions

Use only accessories/accessories specified by the manufacturer.

Special Note

  • To avoid accidental ingestion, keep headphones away from children and pets. The headset contains a lithium battery that can be dangerous if swallowed. If swallowed, seek medical attention immediately. When not in use, store the headset in a capped charging case and keep it away from children and pets.

  • Do not use the headphones at high volume for long periods of time.

  • To avoid hearing damage, use the headphones at a comfortable, moderate volume.

  • Turn down the volume of the device first, then put on the headset, then gradually increase the volume until you reach a comfortable level of hearing.

  • If you are talking over this headset while driving, use it with caution
    and follow the applicable laws regarding the use of your phone and
    headset. In some places, the law has special restrictions on the use of
    such products when driving, such as the configuration of a single ear.
    Do not use the headset for other purposes while driving.

  • If you are using headphones when you are engaged in activities that require concentration, you should be aware of the safety of yourself and others, such as when riding a bicycle or walking on or near roads, construction sites or railways, and follow the relevant laws regarding the use of headphones.

  • You should remove the headphones or adjust the volume to make sure you can hear the surrounding sounds, including alarms and warnings.

  • Children are not allowed to use headphones.

  • Do not immerse the headphones in water or expose them to moisture for long periods of time, or wear them in water sports such as swimming, water skiing, and surfing.

Basic precautions should be observed when using this product:
Read all instructions before using the charging case.

  • The charging box must not be exposed to substances such as water, rain, liquid or snow.
  • Using a power source or charger that is not recommended or sold by the battery manufacturer may result in a risk of fire or personal injury.
  • Do not use the charging case beyond the rated output power.
  • Do not use a damaged or modified charging box. Damaged or modified batteries can cause fire, explosion, or Unpredictable dangers such as personal injury.
  • Do not remove the charging case. Improper reorganization can result in a risk of fire or personal injury.
  • Do not disassemble, squeeze or throw the charging box into a fire or at a high temperature. Exposure to fire or temperatures above 100 °C can cause an explosion.
  • Only qualified service personnel should perform maintenance operations using the same spare parts.

Not suitable for children under 3 years of age.

Contains magnetic materials. Please consult a doctor if it will affect the implantable medical device.

Do not modify this product without authorization.

Use this product only under approved power supplies (such as UL, CSA, VDE, CCC) that meet local regulatory requirements.

Do not overheat the product containing the battery (for example, avoid direct sunlight and keep away from fire, etc.). Wipe off the sweat from the headphones and the charging case before charging.

Feature

  • Bluetooth version 5.0, fast connection, stable transmission, low power consumption, better sound quality.
  • Control: new generation of smart touch technology, eliminating the pressure of the button type, the operation is more comfortable and convenient.
  • Comfort: Get rid of the wire bondage, lightly fit the auricle, exercise, and listen to the song more comfortable.
  • Sound quality: The bass is strong, the vocals are delicate, and the treble is clear.

Packing list

FIG 1 Packing list

Note:

  • Do not use if the product is partially damaged, please contact an authorized dealer or customer service.
  • To prevent rust, periodically clean the charging pins on the headphones with a dry, soft cotton rag or similar item.

Action Illustration

Auto Power On
Take out the headset and turn it on automatically

FIG 2 Auto Power On

Automatic shut-down Put it into the charging bin 5 minutes if the pairing fails, the system will shut down automatically

FIG 3 Automatic shut-down 

Answer

  • Press 1 times short.
  • Keep the current call and answer the second call at the same time (if the phone supports the three-party call function), press for 2 seconds for a long time

FIG 4 Answer

Hang up

  • Short press 1 hang up
  • long press 1 second reject

FIG 5 Hang up

Play / Pause

  • IConnected / music playing
  • Short press once to play / pause

FIG 6 Play or Pause

Volume adjustment / Tail number redial

  • Press and hold the left ear for 2 seconds to decrease the volume by one level
  • Press and hold the right ear for 2 seconds; add a level to the volume

FIG 7 Volume adjustment

Song switching
Music playing

  • Double click the previous song twice on the left;
  • Double click on the right twice for the next song.

FIG 8 Song switching

Low battery prompt
The low voltage is 3.3V, and the low voltage prompt sound is once every 2 minutes

FIG 9 Low battery prompt

Start voice assistant
3 click left and right any earphone to start Siri (device connection status)

FIG 10 Start voice assistant

Pairing mode

When the charging bin is opened, the headset will automatically pair. When the pairing is completed, Apple’s mobile phone will trigger the pop-up window. According to the pop-up
window guidance, long press the key on the front of the charging bin to automatically connect the mobile phone.

FIG 11 Pairing mode

  1. Turn off the phone and press for 5 seconds to enter the pairing status.

  2. When the headset is turned on, the paired headset will be automatically connected back.
    When the headset is successfully connected back, the paired mobile device will be connected back,The time lasts for 30s. If there is no back connected mobile device, it will enter the mobile search status.

  3. The pairing status lasts for 5 minutes. If the pairing fails, it will shut down automatically.

FIG 12 Pairing mode

Paired connection

FIG 13 Paired connection

Activate Bluetooth function of mobile phone or other devices. If it is Android system mobile phone or device, please click “search Bluetooth device” option of mobile phone. Pairing Name: FAE-i53 Pro if it is IOS system mobile phone or device, it will search device automatically;

Automatic connection

FIG 14 Automatic connection

When the model of the Bluetooth headset is found, click to enter pairing; when pairing is successful, the headset will send a tone of “TWS connected” to enter connection standby mode.

Product service

FaE Electronics SZ Co., Ltd.
Add: E217, New City Garden, Dalang S. Rd., Longhwa New Dist., Shenzhen, PRC.
Service Mail: service@fae-tech.com

Read More About This Manual & Download PDF:

FAE-i53Pro TWS Truly Wireless Stereo Headphones Quick Start Guide – Download [optimized]
FAE-i53Pro TWS Truly Wireless Stereo Headphones Quick Start Guide – Download

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals