nVent SC8F Cable Snap Clip Owner’s Manual

August 7, 2024
nVent

nVent SC8F Cable Snap Clip

Product Information

Specifications

  • Catalog Number: SC8F
  • Features: Clip snaps on flange and cable snaps into clip

Product Usage Instructions

Installation
To install the product, follow these steps:

  1. Place the clip on the flange securely.
  2. Snap the cable into the clip until it locks in place.

Usage
Ensure the cable is properly secured in the clip before use. Avoid excessive force when snapping the cable in.

Additional Information
Visit nVent’s website at www.nvent.com for more details about our brands and products.

Note: nVent reserves the right to modify specifications without prior notice.

FAQ

  • Q: What should I do if the clip does not snap securely on the flange?
    A: Ensure that the clip is aligned correctly with the flange and try snapping it in place again with gentle pressure.

  • Q: Can I use this product for outdoor installations?
    A: It is recommended to check the product instructions for specific guidance on outdoor use. Some products may have limitations for outdoor applications.

FEATURES

Clip snaps on flange and cable snaps into clip

PRODUCT ATTRIBUTES

  • Material: Spring Steel
  • Finish: nVent CADDY Armour
  • Flange Thickness: 7.9 – 12.7 mm
  • Outer Diameter: 19 – 24 mm

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support

Europe

  • Netherlands:
    +31 800-0200135

  • France:
    +33 800 901 793

Europe

  • Germany:
    800 1890272

  • Other Countries:
    +31 13 5835404

APAC

  • Shanghai:
    + 86 21 2412 1618/19

  • Sydney:
    +61 2 9751 8500

Our powerful portfolio of brands: nVent.com

© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals