BLAUPUNKT ADH601 Air Dehumidifier Instruction Manual
- June 12, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT ADH601 Air Dehumidifier
Product Information
The ADH601 is an air dehumidifier designed to remove excess moisture from the air. It is manufactured using high-quality, recyclable, and reusable materials and components. The device features a control panel with various buttons and indicators for easy operation. It also has an air exhaust, handles for portability, air inlet for intake, water drain for removing collected water, water container for storage, and a water discharge hose for continuous drainage. The device is compliant with Directive 2014/53/EU and its declaration of conformity can be obtained from the product page at www.blaupunkt.com.
Product Usage Instructions
To use the ADH601 air dehumidifier:
- Before first use, remove all protective elements such as cardboard, film, and styrofoam.
- If the device was transported or not in an upright position, wait at least 3 hours before turning it on.
- Ensure that the water tank is in the correct position.
- If you want to enable continuous drainage, bypass the water tank by connecting a continuous hose (15) to the water drain (12) and placing the other end into a drain or sewer.
- Press the POWER button (7) on the control panel (9) to turn on the device.
- The full tank LED (8) will indicate when the water tank is full and needs to be emptied.
- To drain the water from the tank, follow the instructions provided in the manual.
- After emptying the tank, the dehumidifier will restart automatically.
Important notes
- Store the device in a room where there are no permanent fire (e.g. operating gas equipment) and ignition sources (e.g. operating electric heater).
- Store the device in a way that prevents mechanical damage. Do not pierce or expose to fire.
- Any person involved in servicing or working on a refrigerant circuit should have a current valid certificate issued by an accredited organisation that confirms their qualifications regarding the safe handling of refrigerants according to requirements. Servicing works must be performed only according to the device manufacturer’s guidelines. Maintenance or repair works that require the assistance of other trained personnel should be performed under the supervision of a person competent in the use of flammable refrigerants.
- Before performing any works on circuits containing flammable refrigerants, it is essential to perform a safety inspection to minimise ignition risks. Works should be performed according to a control procedure to minimise the risk of flammable gas or vapours being present during the works. All maintenance personnel and other persons working in the vicinity must be instructed in the nature of the work. Avoid working in confined spaces. Isolate the area around the workplace. Ensure that the area has been inspected by means of the control of flammable materials. Refrigerant may be odourless.
- The device contains a determined amount (in grams) of R290 refrigerant (see the nameplate).
- R290 is a refrigerant that meets the requirements of the European directives concerning environmental protection. Do not pierce any element of the refrigerant circuit.
- When installing, operating or storing the device in a place without adequate ventilation, the room must be designed in such a way that no refrigerant will accumulate (in case of leakage). Refrigerant accumulation can cause a fire or explosion due to the presence of electric heaters, stoves or other sources of ignition.
- Transport of equipment containing flammable refrigerant: see transport regulations.
- Equipment symbol designation: see local regulations. Disposal of equipment containing flammable refrigerant: see national regulations.
- Equipment/devices storage: store in compliance with the manufacturer’s guidelines.
- Storage of packed (unsold) equipment: The protective packaging of stored equipment should prevent the refrigerant from leaking in case of mechanical damage to the equipment. The maximum number of items of equipment to be stored together is specified in local regulations.
- To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
- This device is for domestic use only. Do not use for any other purposes.
- The device should only be connected to an earthed socket with values corresponding to the values on the rating label. It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
- Make sure the cable is grounded, 3-cores with a socket and an earth cable.
- Do not let cord hang over edge of counter, or touch any hot surface.
- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
- Before maintenance work always disconnect the unit from the power supply.
- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
- Never leave the product connected to the power source without supervision.
- Never put the power cable, the plug or the whole device into the water or any other liquids.
- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
- This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment. Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
- Never use the product close to combustibles.
- Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
- The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.
- Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
- Position the unit to ensure optimal air flow. The dehumidifier should be placed at least 30 cm away from walls, furniture, curtains, etc.
- The air-intake and outlet ventilation grilles should be cleaned on a regular basis.
- Do not cover the unit or the ventilation grilles. Do not place any objects on the unit.
- Do not use the unit near solvents, paints, insecticides or any other chemicals.
- Do not place or use the unit in areas where it could be exposed to water, e.g. near showers, bathtubs, washbasins, etc.
- Do not tilt the unit if you suspect that there is any water in the water tank.
- Place the unit on a surface with a load-carrying capacity of at least 40 kg.
- Do not use the unit in spaces smaller than 11m².
- Do not insert any objects into the inlet or outlet grilles.
- Do not direct the air flow towards animals or plants.
- The water which accumulates in the dehumidifier is unsuitable for consumption (it is highly demineralised). It should be discharged into the wastewater system.
- The unit can be used at temperatures 5-32°C. The unit is not designed to maintain a very low humidity level (below 35%) for a prolonged period.
- Before the first use, remove all protective elements such as cardboard, foil, and foamed polystyrene.
- Wait at least 3 hours before switching on the unit following transportation, or if it has been turned upside down (i.e. placed in non-vertical position).
Conformity
Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this
equipment is in compliance with the essential requirement and other relevant
provisions of Directive 2014/53/EU. Declaration of conformity can be obtained
from the product page at www.blaupunkt.com.
Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A,
02-801 Warsaw, Poland, Phone: +48 22 688 08 00, E-mail:
info@everpol.pl
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2012/19/EU. Please
inform yourself about the local separate collection system for electrical and
electronic products. Used appliance should be delivered to the dedicated
collecting points due to hazardous components, which may affect the
environment. Do not dispose this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box), polystyrene
foam(buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
TECHNICAL SPECIFICATIONS
- Rated power(EN60335): 260 W (30°C, 80%)
- Maximum current: 1,3 A (30°C, 80%)
- Moisture removal (30°C, 80%) 16 liters/day
- Voltage: 220-240 V ~50 Hz
- Tank volume: 2,5 L
- Air-flow rate 130 m³/h
- Refrigerant: R290/0,065 Kg
- Maximum noise level: ≤ 47 dB(A)
- Permissible excessive operating pressure for suction: 1,0 Mpa Permissible excessive operating pressure for discharge: 2,6 Mpa Maximum allowable pressure: 4,0 Mpa
- WiFi transmitter frequency range: 2.400 to 2.484 GHz
- WiFi transmitter power : ≤17.5 dBm
CONTROL PANEL DESCRIPTION
- LED Display
- Control panel lock button
- TIMER button – operating time setting
- SPEED button – changing fan output (WiFi reset)
- HUM button – setting humidity level
- MODE button – operating mode settings
- POWER button – on/off switch
- Full tank LED
- Control panel
- Air exhaust
- Handles
- Air inlet
- Water drain
- Water container
- Water discharge hose
DEVICE OPERATION
The dehumidifier has three operating modes: laundry drying mode,
dehumidification mode, continuous dehumidification mode. To start the device,
press the “POWER” button. Each press of the “MODE” button switches the
operating mode to the next one.
Laundry drying mode: maximum output and maximum blowing level. Neither the
humidity nor fan speed can be set.
Dehumidification mode: The humidity and fan speed can be set. The device will
turn on and off while keeping the humidity in the room below the value chosen
by the user.
Continuous dehumidification mode: The device will operate in continuous mode.
The humidity cannot be set, the fan speed can be set.
Humidity setting:
The humidity level can be set between 30% RH and 80% RH in 5% increments. Each
press of the “HUM” button increases the expected humidity level by 5%. After 5
seconds after selecting the expected humidity level, the display will indicate
the reading of the humidity sensor. When the humidity is above or below the
set humidity value, the dehumidifier automatically turns on or off. When the
humidity level is set to 30% RH, the dehumidifier will operate in the
continuous dehumidification mode.
The LED at the “HUM” button indicates the compressor status.
Setting the timer:
The dehumidifier has a delayed start and shutdown function. To set the time
for delayed start or shutdown, press the “TIMER” button. Each press will
increase the time by 1 hour. Pressing the button longer will change the time
more quickly. You can set the timer up to 24 hours. If the delayed start/off
function is active, the LED at the TIMER button will be lit.
“CHILD LOCK” – control panel lock
To lock the control panel, hold down the “CHILD LOCK” button for 2 seconds,
the control panel and other buttons will be locked. To unlock the control
panel and buttons, press and hold down the “CHILD LOCK” button again for 2
seconds.
Memory function:
The device automatically restores the operating status when the power is
turned on. If the device is turned on and there is a power outage when the
voltage returns, the device will start while maintaining the configured
parameters or pre-off settings.
Automatic defrosting function:
When the internal temperature on the cold plate reaches a temperature close to
zero, the dehumidifier will automatically start the defrosting mode. The unit
will be turned off, the fan will work at full speed. The “DEHU” LED on the
control panel will flash. The dehumidifier will resume operation once the
right temperature is reached.
Overflow protection:
When the tank is full of water, the device will turn off automatically. The
indicator will flash and the device will give an audible signal. After
draining the water from the tank, the indicator will go out and the
dehumidifier will restart. Note: The water tank must be in the correct
position.
Continuous drainage function:
To allow continuous drainage of water, with the water tank bypassed, the
continuous hose must be connected for drainage (15) in the water drain (12),
and the other end of it put in the drain into the sewer.
RESETTING THE APPLIANCE SETTINGS AND ESTABLISHING A NEW CONNECTION
To connect the device to the local WiFi network, reset the WiFi connection
settings. The device should be in sleep mode. Press the “SPEED” buttons and
hold for about 5 seconds. When the WiFi LED will flash quickly, the appliance
will be ready to search. CAUTION: the appliance operates only with 2.4 GHz
wireless networks. The network should use WPA2-PSK encryption and AES
protocol.
CONNECTING THE APPLICATION WITH THE APPLIANCE USING WIFI AND BLUETOOTH
Press the “add device” button after starting the application. The appliance
should be found after about 15 seconds. Press the button to continue adding.
Select the available WiFi network and enter the appropriate password. Press
the button to continue. After a while, a message indicating that the appliance
has been added correctly should be displayed.
CONNECTING THE APPLICATION WITH THE APPLIANCE USING WIFI
Press the “add device” button after starting the application. In the “Add
manually” section, select the product group “small appliances…” and then the
“air dehumidifier”. Then select the available WiFi network and enter the
appropriate password. The application should disconnect from the current WiFi
network, connect with the appliance and provide configuration parameters. The
application should return to the previous network. After a while, a message
indicating that the appliance has been added correctly should be displayed.
CONTROLLING THE APPLIANCE USING THE APP
The application indicates the current temperature and humidity in the room.
The application allows you to change the expected humidity level, choose the
intensity of air supply,change the operating mode. This allows you to change
other settings: – button lock – switch off sounds – time switch, in how many
hours the device should start – time switch, in how many hours the device
should turn off.
CLEANING AND MAINTENANCE
- Before you start cleaning the product, ensure that it has been disconnected from the power supply and has fully cooled down.
- Keep the inlet and outlet openings free of dust. Clean the outer surface of the unit with a slightly damp cloth, and then wipe it dry.
- The water tank should be cleaned on a regular basis with a sponge and dishwashing liquid, then rinsed and wiped dry, again with the sponge.
- Clean the air filter on a regular basis. To do this, remove the air-intake grille and remove the filter. Clean the filter.
Competence Center
2N-Everpol Sp. z o.o. ul. Puławska 403A 02-801 Warsaw, Poland
phone: +48 22 688 08 00
e-mail: info@everpol.pl
www.blaupunkt.com
All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>