rizoma GR256 Urlo Motorcycle Grips User Manual
- June 12, 2024
- rizoma
Table of Contents
GR256 Urlo Motorcycle Grips
User Manual
GR256 Urlo Motorcycle Grips
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
Grips “Urlo”
|
---|---
Improper installation can cause the throttle to remain open after it is
released, resulting in loss of motorcycle control, an accident, personal
injury or death. Before riding, open and release the throttle at various
positions along its travel to make sure that the throttle operates smoothly
and forcefully snaps back to the closed position. If there is any delay or if
the throttle remains open, even for an instant, remove and re-install the
throttle. See your retailer for assistance or advice.
INSTALL LH GRIP
Attention: for a correct assembly follow the instructions:
- insert the grip completely (in the position of use);
- remove the grip of 20mm;
- apply a light layer of silicone adhesive;
- insert the grip completely by cleaning the excess silicone adhesive.
TIGHTEN GRUB SCREWS
Once in position tightening the grub screws with threadlocker medium liquid.
INSTALL RH GRIP
Warning: disassemble the original
fairings and the original grip. Open the throttle shells, insert the grip,
connect the throttle cables and close the shells. Before driving, open and
release the throttle in different positions during its movement to make sure
the throttle is working properly and snapping back into the closing position.
INSTALL CAP
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the countries
where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its
products.