WICKED AUDIO Mojo 500 Headphones User Guide
- June 12, 2024
- WICKED AUDIO
Table of Contents
WICKED AUDIO Mojo 500 Headphones
Connecting Bluetooth
-
Charge earbuds in case.
-
Remove earbuds from case.
Earbuds will automatically turn on and sync to one another. -
Connect Bluetooth
Find “Wicked Mojo 300” in your device’s Bluetooth menu and select to pair. -
Turn off buds
Place earbuds back in their case to turn earbuds off.
| Pause/ Play
Double tap (left or right)
---|---
| Next Track / Previous Track
Long press (left or right)
| Voice Assistant
Triple tap (left)
See full product instructions atgo.wickedaudio.com/mojo700
Download the Wicked Audio Appgo.wickedaudio.com/app
Access full features and customize your earbud.
PRECAUTIONS
LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE.
USE AS LOW A VOLUME AS POSSIBLE.
Over exposure to excessive sound levels can damage your ears resulting in
permanent noise-induced hearing loss (NIHL). Please use the following
guidelines established by1he Occupational Safety Health Administration (OSHA)
on maximum time exposure to sound pressure levels before hearing damage
occurs.
SAFE USE & HAZARD WARNINGS
90 dB SPL at 8 hours, 95 dB SPL at 4 hours, 100 dB SPL at 2 hours, 105 dB SPL at 1 hours, 110 dB SPL at 30 min, 115 dB SPL at 15 min, 120 dB SPL: Avoid as damage may occur.
IMPORTANT SAFETY INSTRUCTION
- Read these instructions.
- Keep these instructions.
- Heed all warnings
- Follow all instructions.
Attention should be drawn to the environmental aspects of battery disposal; The use of apparatus in moderate climates
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, includ1ng interference that may cause undesired operation of the device.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause Harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
LIMITATION OF LIABILITY Any Changes or modifications not expressly approved oy the party. responsible for compliance could void the users authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
In no event, under any cause of action of theory of liability, shall Wicked Audio Inc., its distributors or suppliers be liable to you or any third party for indirect, incidental, consequential, special, exemplary or punitive damages, of any and all nature whatsoever, arising out of use of or inability to use a product. This includes without limitation, property damage, loss of value of the product or any third party Products that are used in or with the Wicked Audio products, even if the Wicked Audio product has been advised of the possibility of such damages that one may encounter. Without limiting the foregoing, you understand and agree that Wicked Audio has no liability for any damages or destruction to the consumer electronics device or other personal property that are contained in inside or outside the Wicked Audio products. This includes without limitation laptops, cellular phones, or other hand-held devices, or any loss of data contained on the foreign device. Not with standing any damages that you might incur for general damages in contract, tort (including negligence) or otherwise), the entire aggregate liability of Wicked Audio and any of its distributor and/or suppliers shall be limited to the amount actually paid by you for the Wicked Audio product giving rise to liability. Some states and/or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not to you. The limitations of liability set forth above shall apply to the maximum extent permitted under applicable law.
Made in China
MODEL #: WI-TW455X
IC: 20526-WITW455X
FCC: 2AFM7WI-TW455X
LIMITED ONE-VEAR WARRANTY
keep your receipt to obtain warranty service. Go towww.wickedaudio.com for more details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>