ADDASOUND BT210 Inspire 16 Professional Wireless Headset User Guide

ADDASOUND BT210 Inspire 16 Professional Wireless Headset

[](https://manuals.plus/wp-content/uploads/2022/05/ADDASOUND-

BT210-Inspire-16-Professional-Wireless-Headset.webp)

OVERVIEW

1. Call Answer/End & Play/Pause
2. Power ON/OFF & Bluetooth Pairing & Mute
3. Volume-
4. Volume+
5. USB-C Charge Port
6.  LED Indicator
7. Bluetooth Adapter
8. Bluetooth Adapter Button
9. USB Cable

Function and Buttons

| Button/Port/LED| Function
---|---|---
| ****

CallAnswer/End & Play/Pause Music

| Press the button to answer the call. Double-tap the button to reject the call.

Press and hok:I the button for 1 second to end the call Double-tap the button to switch between active and held call. Press and hold the button for 1 second to activate the voice assistant on you mobilephone when not on a call.

Press the button to play/pause music.

| ****

Power ON/OFF & Mute & BluetoothPairing

| Press and hold the button for 3 seconds to power on/off. Press and hold the button fOf 4 seconds to pair the Bluetooth devices.

Press the button to mute/unmute the microphone when on a call

| Volume –| Press to decrease the volume when on a call Of’ playing music.
| VokJme+| Press to increase the volume when on a call or playing music.
| USB-C Charge Port| USB-C port, plug the USB cable to this port.
| LED Indicator| Show the status of power on/off, mute on/off, Bluetooth pairing

and connection, battery and charging status.

| BluetoothAdapter| Connect the headset to PC via Bluetooth connection.
| BluetoothAdapter Button| Press and hold the button for 10 seconds to reset the connection

if the adapter is bought separately.

| USB Cable| Connect the USB port of the headset to PC.

Wearing Instruction

INSPIRE 16 can be worn on the left or right.
And you can adjust it to a comfortable fit. Please make sure to position the microphone 1 or 2 fingers away from your mouth.

Installation Instruction

1. Turn on/off the headset
   Press and hold the Power ON/OFF button (#2) for 3 seconds to turn the headset on or off.
   You hear “power on” and battery level and the LED indicator (#6) will light up blue for 3 seconds when it turns on.
   You hear “power off” and battery level and the LED indicator (#6) will light up red for 3 seconds when it turns off.
   The headset will turn off automatically if there is no Bluetooth connection in 5 minutes.

2. Connect to power and charge the headset
   Plug the USB cable (#9) to the USB-C charge port (#5) of the headset, and then, connect the other end of the USB cable (#9) into any USB port on your PC or USB power adapter (not included) to charge battery.
   The LED indicator (#6) shows the following colors in different battery levels when the headset is being charged. LED Indicator| Battery Status
   ---|---
   Solid blue| Battery high
   Solid blue and red| Battery medium
   Solid red| Battery low

The LED indicator (#6) flashes red color when the battery is low.
It takes approximately 3 hours to charge the battery and the LED indicator (#6) turns off automatically when the headset is fully charged.

3. Connect to Bluetooth-enabled mobile devices
   Press and hold Power ON/OFF button (#2) for 4 seconds to turn the headset on and begin pairing the mobile phone.
   You hear “pairing” and the LED indicator (#6) flashes blue and red.
   Enable Bluetooth on your phone and search for Bluetooth devices. Select “ADDA INSPIRE 16” as a Bluetooth device. When pairing is successful, you hear “Your phone is connected.” *** The headset will connect with the last successfully connected Bluetooth device automatically.

4. Connect to PC using Bluetooth adapter
   Turn the headset on and plug the Bluetooth adapter (#7) into a USB port on your PC.
   Bluetooth adapter (#7) is pre-paired to the headset.
   You hear “connected” when pairing is successful.
   Make sure to set “ADDA BT210” as default recording and playback devices in the sound settings of your PC and softphone.

5. Connect to PC and mobile phone simultaneously
   Turn the headset on and pair the mobile phone first.
   When pairing is successful, you hear “Your phone is connected.”
   And then, plug the Bluetooth adapter (#7) into a USB port on your PC.
   Bluetooth adapter (#7) is pre-paired to the headset.
   You hear “connected” when pairing is successful.
   Now the headset is paired to PC and mobilephone simultaneously.

6. Connect to PC using a USB cable
   Make sure to turn the headset on, and then plug the headset into a USB port on your PC using the USB cable (#9).
   Select “ADDA INSPIRE 16” as default recording and playback devices in the sound settings of your PC and softphone. Please note your headset is charged at this time.

Usage Instruction

1. Answer/end or reject a call
   Press the Call Answer/End button (#1) to answer a call. Double-tap the button (#1) to reject a call.
   Press and hold the button (#1) for 1 second to end a call. Double-tap the button (#1) to redial the last number that was
   called. *** Call answer/end also work on Skype for Business and Microsoft Teams.

2. Handle multiple calls
   Double-tap the Call Answer/End button (#1) to reject the incoming call and continue the current call.
   Press the button (#1) to answer the incoming call and hold the Current call.
   Double-tap the button (#1) to switch between active and held call.

3. Mute/unmute the microphone
   Press the Power ON/OFF button (#2) to mute the microphone when ona call. You hear
   “mute on” and the LED indicator (#6) shows solid red Press the Power ON/OFF button (#2) to unmute the
   microphone when on a call. You hear “mute off” and the LED indicator (#6) shows solid blue.

4. Adjust the volume
   Press the volume + (#4) button to increase the volume.
   Press the volume – (#3) button to decrease the volume.

5. Play/pause music
   Press the Call Answer/End button (#1) to pause music when listening to music.
   Press the Call Answer/End button (#1) to play music.

Trouble Shooting

The Bluetooth headset can’t be paired with PC.

• Make sure to choose “ADDA BT210” as the default recording and playback device in the sound settings of your PC and
  softphone.

• Re-plug the Bluetooth adapter.

The headset does not work when it connects to the PC using a USB cable.

• Please make sure to the headset is switched on first before it is connected to the PC.
• Also, choose “ADDA INSPIRE 16” as the default recording and playback device in the sound settings of your PC and
  softphone.

The headset has been paired successfully but has intermittent sound.

• Please note some factors like obstacles, signal strength and
• wireless congestion may affect the sound signal transmission.

Usage Attention

Make sure to store the headset when it is powered off.
The headset is not waterproof. Don’t put it in humid environments.
Extreme temperatures may affect battery life and performance.

Accessories

Limited Warranty

ADDASOUND offers a two-year limited warranty. Please visit Our Website for more warranty details: www.addasound.com.

RED Compliance Information

1. RF information:
   Bluetooth: 2402-2480MHz
   Headset Max power: 1.99dB3m
   Dongle Max power: 3.96dBm
   Battery:280mAh,3.7V,4.2V

2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

3. Charger description: The product does not come with a charger as standard. It is recommended that the user can use the
   charger specification (5V 1A charger);The maximum operating temperature of the product, please refer to Ideal temperatures: 0°C to 45C for operating.

FCC Compliance Information

1. INSPIRE 16 FCC ID: 2AHSPINSPIRE16 BT210 FCC ID 2AHSPBT210
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s sauthority to operate the equipment.
5. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.
   • This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
6. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

EU Declaration of Conformity for

RED Directive 2014/53/EU
We, ADDASoUND DENMARK A/S
Address: Skalhuse 5, DK-9240 Nibe, Denmark Hereby, declare that the essential requirements set out in the RED Directive 2014/53/EU have been fully fulfilled on our product with the indication below:

• Product Name: Bluetooth headset
• Model Name: INSPIRE 16
• Brand Name: ADDASOUND/ADDA

The following standards have been applied for the investigation of compliance:

RF:

• ETSI EN 300328 V2.2.2
• ETSI EN 301 489-1 V2.2.3
• ETSI EN 301 489-17 V3.2.4

Safety:
EN 62368-1:2014+A11:2017

Health:
EN 62479:2010
Accessories:
USB Cable: 1.5m
Battery: jOYGEE502030, 270mAh, 3.7V

And apply notified body assessment:
Notified Body number 0700
PHOENIX TESTLAB GmbH
Königswinkel 10, D-32825 Blomberg, Germany
Furthermore, the ISO requirement for the in-process quality control procedure aswell as the manufacturing process has been reached. The technical document asv well as the test reports will be kept for a period at least 10 years after the last
product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection. Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>