ADDASOUND S1000 USB/Bluetooth Conference Speakerphone User Guide
- June 6, 2024
- ADDASOUND
Table of Contents
S1000V
USB/BLUETOOTH CONFERENCE SPEAKERPHONE
USER GUIDE
1, Mute Button and LED
2, Multifunctional Button
3, Volume +
4, Call Answer/End
5, Power ON/OFF and LED
6, Volume —| 7, Bluetooth Button and LED
8, USB-C Charge Port
9, 3.5mm Aux Port
10, LED Indicator
11, USB Cable
---|---
Functions and buttons
| Button/Port| Function
---|---|---
1| Mute Button| Press to mute/unmute the microphone.
Mute LED| A solid red LED: Microphone is muted.
No LED Display: The microphone is unmuted.
2| Multifunctional Button| Press to pause/play audio;
Press and hold the button for 5 seconds to activate the voice assistant.
3| Volume +| Press to increase the volume.
4| Call Answer/End| Press to answer/end the call.
Press and hold the button for 3 seconds to reject the call.
5| Power ON/OFF| Press and hold the button for 3 seconds to power on or off.
Press the button to show the battery remaining (#10).
Power ON/OFF LED| Solid white LED: Battery full or enough to use 51000
A solid red LED: Battery charging
Flashing red LED: Battery low
6| Volume –| Press to decrease the volume.
7| Bluetooth Button| Pair/connect Bluetooth-enabled devices or disconnect.
Bluetooth LED| Solid blue LED: Bluetooth device is connected. (Pairing
successful)
Flashing blue LED: Bluetooth pairing
8| USB-C Charge Port| USB-C port, plug the USB cable into this port.
9| 3.5mm Aux Port| Connect the audio device with a 3.5mm plug to the port.
10| LED Indicator
Red LED| A solid red LED: Microphone is muted.
Flashing red LED: Battery low
Blue LED| Flashing blue LED: Bluetooth pairing
Blue LED lights up for two seconds: Bluetooth device is connected.
Blue LED lights up in a clockwise direction: volume +
Blue LED lights up in a counter-clockwise direction: volume –
10| Green LED| Green LED illuminates for two seconds in a clockwise direction:
power on.
---|---|---
Green LED illuminates for two seconds in a counter-clockwise direction: power
off.
Green LED illuminates for two seconds in part: battery remaining.
Flashing green LED: incoming call
11| USB Cable| Connect the USB port of 51000 to the PC.
Installation Instruction
-
Turn on/off S1000
S1000 turns on automatically without using the Power ON/OFF button (#5) when it connects to power. Press and hold Power ON/OFF (#5) for 3 seconds to turn 51000 on or off when it does not connect to any power. It will turn off automatically if there is no Bluetooth connection in 5 minutes. You hear “power on” and the LED indicator (#10) will light up green for 2 seconds in a clockwise direction when it turns on. You hear “power off” and the LED indicator (#10) will light up green for 2 seconds in a counter-clockwise direction when it turns off. -
Connect to power and charge S1000
Plug the USB Cable (#11) to USB Port (#8) of 51000, and then, connect the other end of the USB Cable (#11) into any USB port of your PC or USB power adapter (not included) to charge the battery. The indicator of Power ON/OFF (#5) is solid red when charging. It turns solid white when it is fully charged. Press Power ON/OFF (#5), and green LED (#10) illuminates for two seconds in part to show battery remaining. -
Connect to Bluetooth-enabled mobile devices
Press the Bluetooth button (#7) into Bluetooth pairing mode. You hear “pairing” and the LED indicator (#10) flashes blue. Enable Bluetooth on your device and search for new devices. Select “ADDA-S1000” as a Bluetooth device. When pairing is successful, you hear “Your device is connected.” and the LED indicator (#10) turns solid blue for two seconds and then, turn off. The LED indicator (#7) turns solid blue. Now you can take calls or stream media.
*** 51000 will connect with the last successfully connected Bluetooth device automatically. -
Connect to PC through USB cable Plug the USB cable (#11) to the USB port (#8) of 51000, and then, connect the other end of the USB cable (#11) into any USB port of your PC. You hear “USB enabled”. Make sure to set ADDA-51000 as the default audio device in the sound settings of your Windows Control Panel and softphone.
Usage Instruction
Answer/end or reject a call
Press the call answer/end button (#4) to answer/end the call. Press and hold
the button(#4) for 3 seconds to reject the call. The LED indicator (#10)
flashes green when there is an incoming call.
Mute/unmute the microphone
Press the mute button (#1) to mute the microphone. The mute indicator (#1) and
the LED indicator (#10) will show solid red. Press again to unmute the
microphone.
Adjust the volume
Press the volume + (#3) button to increase the volume and the blue LED
indicator (#10) lights up in a clockwise direction.. Press the volume – (#6)
button to decrease the volume and the blue LED indicator (#10) lights up in a
counter-clockwise direction.
Activate the voice assistant on your mobile phone
Press the multifunctional button(#2) for 5 seconds to activate the voice
assistant of your mobile phone.
Activate voice prompt
will be activated automatically when 51000 is powered on.
TroubleShooting
- When 51000 is connected to a PC, there is no sound from the speakerphone. •Make sure to choose ADDA 51000 as the default playback and recording device in the audio settings of your PC system.
Usage Attention:
Make sure to store the speakerphone when it is powered off. The speakerphone is not waterproof. Don ‘t put it in humid environments. Extreme temperatures may affect battery life and performance.
Accessories
S1000 Speakerphone X1
USB Charging Cable X1
User Manual X1
Warranty Card X1
FCC
-
S1000 FCC ID; 2AHSP —S1000
-
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
-
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
— This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. -
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RED
- RF information: Bluetooth: 2402-2480MHz Max power: 1.99dBm Battery:18650-2600mAh,3.6V,4.2V
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Charger Description: The product does not come with a charger as standard. It is recommended that the user can use the charger specification (5V 1A charger); The
- maximum operating temperature of the product, please refer to Ideal temperatures: 0° C to 45° C for operating. The device complies with RF specifications when the device is used at 20 cm from your body.
ADDASOUND DENMARK A/S
All rights reserved.
ADDASOUND@ is a registered trademark
of ADDASOUND DENMARK A/S.
All other trademarks are the property of their respective owners.
Designed and Engineered in Denmark
Made in China