ADDASOUND S300 USB Bluetooth Conference Speakerphone User Guide

S300 USB Bluetooth Conference Speakerphone
User Guide
Use at home Office or Traveling
www.addasound.com

Note: USB Type C to A Cable
The USB Type C to A. ADDASOUND is packed in the travel bag inside the box.

Using the ADDASOUND S300

Best for Use In
Home – office- Traveling

|
---|---

Bluetooth/USB

Getting Started -USB Connection

The ADDASOUND S300 can be used with a Bluetooth connection to your device or a USB connection to your Windows 10 PC or Mac.
USB connection – Using with a PC or Mac

• Insert the USE Type-A end of the ADDASOUND S300 into the USB TypeA port on your computer.
• Insert the USB Type C end of the ADDASOUND S300 into the USB type C port on the ADDASOUND 3300. – Toggle Source Button to USB source – Source Light will be lit solid Green.

Note: When connected to a PC or Mac the battery wil charge on the ADDASOUND S300.
The ADDASOUND S300 features full plug and play support for Windows 10, OSX / macOS, and Chromebooks.
After plugging the ADDASOUND 3300 into the computer, you may start any application that accepts an ADDASOUND S300, such as Skype, and begin using your ADDASOUND S300.
If the computer does not automatically recognize the ADDASOUND 5300 when it is plugged into the USB Type-A port, try plugging the USB cable into a different USB Type-A port If this does not work, then restart the computer. This wi cause the ADDASOUND 5300 to be recognized in most instances.

Getting Started – Bluetooth Connection – Step 1

Before you start, please Ay charge the ADDASOUND S300. (See Page 2 – USB Connection)

• Turn on the ADDASOUND S300 by pressing the Power button.
• Toggle Source Button to Bluetooth source – Source Light will be lit Blue. Source Light Flashing Blue
• The ADDASOUND 5300 is ready to pair and connect.

Source Light Solid Blue

• Your device has connected to the ADDASOUND S300 and is ready to use.
• The ADDASOU ND 5300 allows the last device it was connected with to aulormliclly likely reconnect with the ADDASOUND 5300 each time the ADDASOUND S300 is turned on and that device is within range:

The ADDASOU ND 8300 can be connected to one device at a time.

• To pair and connect to a different device, you need to first disconnect the currently paired device.
• To disconnect The current device, press and hold down the Source Button for 3 seconds,
• The Source Light wil begin flashing blue and the ADDASOUND 3300 is ready for the next device to pair and connect

“Your device needs to be within 100 unobstructed feet of the AD DASOUND 5300 to pair and connect. If there is an issue when connecting please move your device closer to the ADDASOUND 5300. then pair and connect, When the charge is too low indicated by a flashing red light on the ADDASOUND S300, your device wil is not able to connect with the ADDASOUND S300.

Getting Started – Bluetooth Connection – Step 2

With your iPhone, iPad tablet, Smartphone

• Go to Settings > Bluetooth, check Bluetooth is on

• Select ‘ADD A SOUND S300’ when it appears under DEVICES – Your device will connect in a few seconds

• The Source Light wil turn solid blue and there wil be a quiet chime – The ADDASOUND S300 is ready to use
  Note: Your Smartphone or Tablet instructions may vary With your apple Mac or Windows 10 Laptop/Computer

• It is recommended to use the USB Connection when using a Windows 10 Laptop/Computer or Apple Mac.

• If a Bluetooth Connection is preferred, please refer to the help in the Windows 10 or the Mac OS for the pairing and connecting instructions.

LIghts

Controls

Call Button
Bluetooth Connection to iPhone or Smartphone

• Press to accept an incoming call or Press arid Hold for 2 seconds to reject the call.
• During the cal, Press to hang up call USB Connection to PC
• Not supported by Windows 10 or Mac Applications
  

Volume Up – Press to increase the volume (Press and hold for more than 2 seconds to continuously increase the volume).
Mic Mute/Un-mute – In talk mode, press once to mute the mic input; Press again to unmute.
Volume Down – Press to decrease the volume (Press and hold for more than 2 seconds to continuously reduce the volume).
Source Button
LJSB Connection to PC or Mac- Press to change between Bluetooth and USB modes – In Bluetooth mode, Press and Hold for 3 seconds to disconnect the connected device and enter pairing mode.
Power Button
In Standby mode: Press once to turn on the speakerphone – In Working mode, Press and Hold for 2 seconds to turn off the speakerphone.

Controls

Auto Power

• The ADDASOUND 5300 wil riot auto power off when connected to a power source or connected to a PC or Mac
• The ADDASOUND 5300 wil auto power off within 15 minutes when the Bluetooth is disconnected and using Battery power.

Changing Sources

• When in Bluetooth mode
• Connecting the 5300 to a PC or Mac wi ih the USB ADDASOUND. wil sub-switch to USB mode.
• Press the Source Button to switch b the USB mode.
• When in USB mode
• If the USB ADDASOUND is disconnected from a PC or Mac, wil auto switch to Bluetooth mode.
• Press the Source Button to switch to Bluetooth mode.
• The Bluetooth Device Name wil show as the ADDASOUND S300 name in Windows 10 or Mac OS
• If the S300 was previously connected to a Bluetooth device and the device is within range,the S300 evil auto switch to Bluetooth mode when there is an incoming cal or music is played on the connected Bluetooth device.

Volume control

• Volume range: 0- The previous volume level wi be kepi when power is turned off and on again.
• Bluetooth mode and USB mode have different volume levels, they are not synchronized with each other.

Technical Specification

Specifications

Power| •5V / 1A – Power Source
• 5W when playing music
Torque disperse| • Speaker: 20 – 20, 500 Hz
• Microphone: ICD
Input: cc| • Speaker: 1 °him
• microphone: 2.2 °him

Recommended system requirements

Support/Ad operating cyst-Arn| Windows 10 Mac: OS X 20 4.2.1 or higher
Operating temperature| Product working. another Temperature 0-35ºC

Frequently Asked Question

Frequently Asked Question

|

possible solution

---|---
Bluetooth connection
cant connect for the first time| • check the connection volume
• Full-duplex audio: Addasound S1000 Speakerphone adapts full-duplex mode, both parties’ voices can be transmitted at the same time, just like a face-to- face real-time conversation. You can hear others while others can hear you.
• 360 degrees coverage: 4 microphones are deployed all around; voice can be collected in all directions, instantly convert any spaces such as home or office into the meeting room.
www.addasound.com
USB connection
Windows 10| • Custom DSP algorithm: enhance voice pickup through real- time echo cancellation, de-reverberation, and environmental noise suppression.
• Balanced volume: S1000 speakerphone can automatically adjust the volume
www.addasound.com
USB connection
Mac:| • Instant setup: Connect via Bluetooth or USB-C cable without installing any drivers. Suitable for Windows 7, 8, 10, and macOS.
• Universal compatibility: Addasound Speakerphone is compatible with all leading UC platforms, No matter what platform you use, you can enjoy a seamless meeting experience.
USB connection
Windows 10
|

• Originated from Denmark, a country that leads the world’s sound technology, ADDASOUND is a global leading provider of voice solutions and unified communication devices. ADDASOUND’s products are designed and engineered in Denmark by a reputable team and are now distributed all over the world. The professional team is enthusiastic and highly skilled in the industry. ADDASOUND always tries to provide the customers with the best experience of voice communication and guarantees the highest standard of reliability and quality.

Customer Support

If you have a question about your ADDASOUND S300, our Customer Service Team wants to assist you.
Contact us at: www.addasound.com

Safety and Precautions

• Read and flow all instructions
• All operating and use instructions should be followed.
• Protect the ADDASOUND 5300 from being pinched, particularly at the connectors. Unplug during lightning storms or when unused for king periods of time.
• Do not place near any heal sources such as radiators, heat registers, stoves; or other apparatus (including amplifiers) that produce heat.
• Du nut make alterations to the ADDASOUND S300,
• Do not place near naked flame sources, such as lighted candles.
• Do not expose to excessive heat (e.g. from storage in direct sunlight, fire, or the like)

2021 ADDASOUND or its subsidiaries. AI rights reserved. ADDASOUND and other trademarks are trademarks of Nexusound or its subsidiaries. Other trademarks may be trademarks of their respective owners.

Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Unique Identifier: (S300)
Responsible Party
ADDASOUND DENMARK A/S
www.addasound.com

Compliance information statement

FCC

1. S300 FCC ID 2AHSP-S300
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
5. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off  and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This device and its antenna(s) must not be co-located or operating in conjunction with any other
  antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RED

1. RF information:
   TX: 2402-2480MHz
   Max power: 8.21dBm

2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
   DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

3. Charger Description: The product does not come with a charger as standard. It is recommended that the user can use the charger specification (5V 1A charger);The  maximum operating temperature of the product, please refer to Ideal temperatures: -10°C to 45°C for operating,

4. The device complies with RF specifications when the device is used at 20 cm from your body.

WARRANTY CARD

Name|
---|---
Telephone|
E-Mail|
Add ross|
Model|
ID NO.|
Purchase Date|
Description of Failure ,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>