Sunrise Connect Box 3 Fiber Installation Guide
- June 12, 2024
- Sunrise
Table of Contents
Sunrise Connect Box 3 Fiber Installation
Product Information
The Connect Box 3 Fiber is a high-speed internet router that provides an extraordinary internet experience. It supports a maximum speed of 10 Gbps and comes with a power supply unit.
Key Features
- High-speed internet connectivity
- Supports fiber optic connection
- Easy setup and installation
- Multiple device connectivity
- White LED indicator for status
- WiFi network with customizable SSID (Sunrise_xxxxxxx)
- Secure WiFi password (d9bdZwsTnqzhTprv)
Additional Information:
- For more information and support, visit sunrise.ch/cb3f
- Use only the cables provided in the package for installation
- Ensure proper positioning of the Connect Box 3 Fiber for optimal signal reception
Product Usage Instructions
- Remove the protective caps from both ends of the fiber optic cable.
- Plug in the power supply unit.
- Wait for the white LED indicator to light up, indicating that the device is ready.
- To connect to the WiFi network, scan the QR code or manually enter the SSID (Sunrise_xxxxxxx) and password (d9bdZwsTnqzhTprv).
- For wired connections, use the available LAN ports.
- For telephone connections, use the designated TEL ports.
- Ensure that all connected devices are properly configured to utilize the high-speed internet connection.
Quick Install Guide
Your new Connect Box 3 Fiber
Your extraordinary internet experience is only 3 steps away. Follow the
steps on the next page to set up your Connect Box 3 Fiber and get all your
devices connected. More info available at:
sunrise.ch/cb3f
SETTING
Give your Connect Box 3 Fiber enough space
The Connect Box 3 Fiber is a free spirit and likes a lot of space. Always
position it upright and make sure that the front is facing into the room
because the signal comes from the front and top of the Connect Box 3 Fiber. So
don’t hide your Connect Box 3 Fiber in a cupboard or behind your TV.
CONTENTS
INSTALLATION
Have you received the activation message?
The message confirms
- that your internet line is activated
- that you can start with the installation
- into which of the OTO ports (1-4) you should plug your fiber cable
- Remove the protective caps from both ends of the fiber cable Use only the new cables included in the delivery for installation. Open the cap on the fiber optic cable outlet (OTO socket). Connect the fiber optic cable to the specified port (1-4, as stated in the activation message).
- Plug in the power supply unit
- Connect to the Internet
- (Optional) Connect your phone right after receiving your activation confirmation (via email/SMS).
