SR SUNRISE 12 Inch Shower System With Slide Bar Installation Guide

Installation Manual
Shower System with Slide Bar

12 Inch Shower System With Slide Bar

Please do not hesitate to contact us with your questions, concerns and/or problems, we’re here to help. We will replace or repair your product free of charge.
Contact US: mikechen@eyakult.com (USA)
zhongly@eyakult.com (Canada)

SR SUN RISE
Founded in 2005, SR SUN RISE has since then marked its own path to be among the top brands for high-end bathroom equipment. Over the years, we have striven to uphold our commitment in the designing and production of highquality products, taking into account ergonomics, convenience, style and customer needs to provide the best bathroom solutions, with the goal of improving the quality of everyday home life.
Our products are manufactured according to strict guidelines to ensure consumer health, safety and comfort as well as environmental conservation. Our products can now be found in private homes and commercial buildings around the globe.

IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761
+ Phone 909-472-4100
« Fax 909-472-4244
» www.iapmort.org.

CERTIFICATE OF LISTING

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier’ stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activiy is coupled with periodic survelance of the supplier’ factory and warehouses as well as the assessment of the supplier’s Quality Assurance System. This lstingis subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO C ® Research and Testing, Inc. o the product acceptance by Authorities Having Jursdiction.

Issued To:
GUANGDONG RI ZHENG INDUSTRIAL CO., LTD.
NO.41 XIANSAN ROAD, RIZHENG BUILDING, WANJIANG SREET, 52300 DONGGUAN , GUANGDONG, CHINA
Product:
Plumbing Fixture Fittings

Products are in compliance with the following standard(s)
ASME A112.18.1-2018/CSA B125.1-18
Revised Date: January 28, 2021
Void After: January 2026*| Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
File Number: 12900
Effective Date: January 2021
---|---

*This certificate s not evidence of current isting. To ver fy listing status, visit the IAPMO R&T Product Listing Directory at pld.iapmo.org 
design without having first obtained the approval of the Product Cert fication Committee, or any evidence of non-compliance with applicable codes and standards or of nferior workmanship, may be deemed sufficient cause for revocation of this isting. Production of or reference to this form for advertising purposes may be made only by specific written permission of APMO Research and Testing, nc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.

IAPMO RESEARCH AND TESTING, INC.
CERTIFICATE OF LISTING

Issued To: GUANGDONG RI ZHENG INDUSTRIAL CO., LTD.
File Number: 12900
Product: Plumbing Fixture Fittings
Effective Date: January 2021
Revised Date: January 28, 2021
Void After:January 2026
This certificate s not evidence of current listing.To verify listing status, visit the IAPMO R& T Product Listing Directory at pld.iapmo.org

Identification:
Plumbing supply fittings shall be marked with the manufacturer’s recognized name, trademark, or other mark or, n the case of private labeling, the name, trademark or other mark of the customer for whom the fitting was manufactured. The marking shall be accomplished by use of a permanent mark or by placing a permanent label on the product. Markings on plumbing supply fittings shall be visible after nstallation.
Showerheads and hand-held showers shall be marked with the manufacturer’s specified maximum flow rate, in L/min and gpm.
Kitchen, lavatory, and metering faucets shall be marked with the manufacturer’s specified maximum flow rate, n L/min and gpm or L/cycle and gpc.
Single-handle and single-control bath and shower mixing valves shall have their temperature control settings dentified alphabetically, numerically, or graphically.
High-efficiency commercial pre-rinse spray valves shall be marked with the manufacturer’s specified maximum flow rate, in L/min (gpm).
Listed products shall bear the cUPC® certification mark.
Packaging for plumbing supply fittings shall be marked with the manufacturer’s name, trademark, or other mark as well as the model number or, in the case of private labeling, the name, trademark, or mark of the customer for whom the fitting was manufactured as well as the model number.
Packaging for showerheads and hand-held showers shall be marked with the manufacturer’s specified maximum flow rate and either the manufacturer’s specified minimum flow rate or the statement “For use with automatic compensating valves rated at xxx L/min (yyy gpm) or ess”, where xxx L/min (yyy gpm) is the manufacturer’s specified minimum flow rate.
Packaging for kitchen, lavatory, and metering faucets shall be marked with the manufacturer’s specified maximum flow rate, n L/min and gpm or L/cycle and gpc.
Characteristics :
Fittings may nclude avatory, sink, bath & shower, awn and sediment faucets. Plumbing fixture fittings to be nstalled in accordance with the manufacturer s instructions and the requirements of the atest edition of the Uniform Plumbing Code and National Plumbing Code of Canada.
Products listed on this certificate have been tested by an IAPMO R& T recognized laboratory. This recognition has been granted based upon the laboratory’s compliance to the applicable requirements of SO/IEC 17025.

Square Model

Package list

WARNING : Choking hazard. Please keep all small parts and plastic bags out of the reach of children.

1. INSTALL SHOWER VALVE
   Step 1: Measure valve installation dimensions.Step 2: Determine the position of the valve.Step 3: Drill, hammer in anchors, fasten valve body to wall(This AN step is for masonry application.)Step 4: Check for level on valve body Step 5: Connect the water pipe. (Pipe clean and free of impurities)
   Be suitable for Pex pipe, Copper pipe and PVC pipe1/2 inch male NPT fitting connection to be made with pipe thread sealant, do not over tighten
   Step 6: Test for Leaks Before Installing Wall Board
   1.Check the valve connector for leaks;
   2.Open the valve and test the hot and cold water left and right;
   3.Checking the Water diverter knob can correctly switch between the showerhead and handheld.Both hot and cold water pipes must be openStep 7: Tile

Important Note

Wall Mounted /Ceiling Mounted Installation Before Tiling

After tiling, the distance from the tile surface to the brass fittings (recessed the wall) is: (: The shower bracket (and bathtub faucet) is 0.4 inch. (2): The shower arm is 0.2 inch.

2. INSTALL SLIDE BAR
3. INSTALL HAND SHOWER HEAD AND HOSE
4. INSTALL SHOWER ARM (A STYLE) AND RAIN SHOWER HEAD INSTALL SHOWER ARM (B STYLE) AND RAIN SHOWER HEAD

Round Model

Package list

WARNING : Choking hazard. Please keep all small parts and plastic § srsunrise bags out of the reach of children.

Step 1: Install shower valve

NOTE :The depth of chisel wall for reference only.
The actual depth is based on the customer’s actual demand.

Step 2 : Test for Leaks Before Installing Wall Board

1. Check the valve connector for leaks;
2. Open the valve and test the hot and cold water left and right;
3. Checking the Water diverter knob can correctly switch between the showerhead and handheld.Both hot and cold water pipes must be open

Step 3 : Tile

Step 4: Install Shower Arm
A Style: Wall Mounted shower arm

B Style: Ceiling Mounted shower arm

Step 5: Install Slide Bar

Step 6: Install Hand Shower and Hose

Tips:
If you want to adjust the water pressure, you can do this.

1. Adjust the red collar to limit the water flow and temperature.

2. Turn clockwise to reduce water pressure until it closes.
   Unscrew the water pressure will increase.Customer Name|
   ---|---
   Retailer /Assembly Fitter|
   Purchase Date|
   Warranty Duration| 5 years as of purchase date

3. If the above contents are not complete, the warranty will be considered void, please confirm the above contents when you purchase.

4. The complimentary repairs are limited to instances mentioned on the warranty card only.
   card along with the invoice to the retailer / assembly fitter.

5. within warranty period, if any technical faults occur, customer should present this warranty

Guarantee Repairs Claims

1. Within warranty period, we are responsible for repairing any defective product free of charge.

2. Please contact seller via email with this warranty card and invoice if repairs are needed during the warranty period.

3. we will not be responsible for any claims listed below:
   3.1 The damage and/or malfunction caused by improper use an/or repairs; or any unauthorized reconstruction; including any damage caused by abuse (i.e. fall, throw… etc.)
   3.2 Please engage the services of a professional plumber. we will not be responsible for any damage and/malfunction caused by wrongful installation.
   3.3 The damage and/malfunction caused by removing after installation or other factors.
   3.4 The damage and/malfunction caused by application beyond the scope of usage.
   3.5 The damage and/malfunction caused by sand, dirt and other impurities.
   3.6 The damage and/malfunction caused by improper/insufficient maintenance; rust on finishing etc…
   3.7 The damage and/malfunction caused by fir, earthquakes, flood, lightning and other natural disasters, pollution, harmful gas, salts, abnormal voltage and other factors.
   3.8 On occasions when the warrantee card or invoice is not presented.

4. The recommended water temperature of hand shower and rain shower is <42°C; water pressure 0.1-0.3 Mpa. The highest temperature should not reach beyond 70°C and water pressure should not exceed the limits of 0.05-0.5 Mpa. Please keep any shower products away from the heating devices to avoid potential risks.

5. This limited warranty applies only to the original end-user or business. It expressly excludes labor charges, removal charges, installation, or other incidental or consequential costs. Any inappropriate application will void the warranty.

6. This warranty cannot be replaced if missed, please keep safe.

Clean and maintain product

How to clean shower head nozzles

1. Just rub the nozzles with your finger or a toothbrush to loosen any deposits, and then run hot water for a few minutes 2.Put the showerhead into a pot. Consider using a smaller container that just about fits the showerhead; this way, you will use less vinegar. You can also use a small bucket or plastic bin.
   Fill the pot with enough white vinegar to cover the showerhead.
   The acids in the vinegar will help dissolve the white mineral deposits on the showerhead.
   Let the showerhead soak in the vinegar for 30 minutes The more soiled the showerhead is, the longer you will have to leave itin the vinegar.
   Maintain Chrome and Brushed nickel finished product 1.To clean the products all you need is a high quality microfiber cloth.

2. Apply a high quality chrome cleaner to a clean cotton cloth, and wipe over the chrome. Leave as per product instructions, and then rinse with warm water. Gently remove any product residue using a dry chamois or paper towel.

3. How to Clean Chrome: Homemade Solutions In addition to professional products, homespun solutions also have their place when breathing new life into dull chrome. Try this shortcut to achieving chrome cleaning nirvana:
   Detergent and warm water! Submerge chrome-plated objects including pots and pans in a sink full of warm water. Add a halfcup of a high quality washing up detergent (Persil washing up liquid is good) and rub gently with a soft cotton cloth to avoid scratching the chrome. Use a scented detergent to leave kitchenware smelling fresh, as well as spotless.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>