TaoTronics TT-CL016 Light Therapy Lamp User Guide
- June 12, 2024
- TaoTronics
Table of Contents
LIGHT THERAPY LAMP
TOUCH & SHINE
Questions or Concerns?
[email protected]
TT-CL016
User Guide
PACKAGE CONTENTS
- 1 x TaoTronics Light Therapy Lamp (Model: TT-CL016)
- 1 x Power Adapter
- 1 x User Guide
- 1 x Thank You Card
PRODUCT DIAGRAM
- Lamp
- Power Button/ Timer Setting
- Light Brightness +
- Light Brightness
- Power Port
- Foldable Bracket
IMPORTANT
Warning
- Please keep the lamp away from water or any other liquid to avoid electrical shock.
- For indoor use only.
- This appliance is not intended for use by persons (including children) with skin damage, reduced sensory or mental capabilities, or lack of experience and knowledge, unless authorized by a professional physician.
- Keep away from heat and avoid direct sunlight.
- Do not perform any repair or maintain while using this product for treatment.
- Do not try to repair or dismantle the lamp by yourself.
- Do not drop or knock the lamp on hard surfaces.
- Portable and mobile RF communication equipment may interfere with medical electrical equipment.
- Do not place the device in a location where it is difficult to operate the disconnecting device (disconnecting device: Adapter).
- Using an adapter other than the one provided by the manufacturer may result in failure to work, or even a safety incident.
- Keep the equipment out of reach of children or infants, avoid strangula tion caused by the adapter cable.
Cautions
- Some people may suffer from light sensitivity, discontinue use immediately if any discomfort occurs.
- Never cover the lamp or place anything on top of it during operation to avoid overheating or fire hazards.
- Consult your health care provider before use of this product if you are under medical care or have suffered from an eye condition before.
- Follow local ordinances and recycling instructions regarding disposal or recycling of the device and device components.
- Do not look directly look at the light therapy lamp. It only serves as background light.
- If you have any product problems or report an unexpected situation during use, please unplug the power immediately and call the after-sales service hotline.
INTENDED USE
Your new TaoTronics LIGHT THERAPY LAMP is a remarkable product with many features and benefits:
- Delivers LED light to your home, office, dorm room or apartment.
- Designed with a stable stand for easy placement on a convenient spot.
- Cues your body’s own energy enhancers to help you regain focus and concentration.
- UV free LED- the built-in LED light panel delivers the full brightness with no pollution, no radiation and no stroboscopic effects.
- 10,000 lux at 10cm/4” from lamp to lift up your spirit.
SPECIFICATIONS
| Model | TT-CL016 |
|---|---|
| Voltage | AC 100-240V, 50/60Hz |
DC 12V 1.0A
Power| 12W Max.
Storage Temperature| -20°C -50°C / -4°F -122°F
PREPARING FOR USE
Put the lamp on a flat and stable surface using the support foot ( Fig.1 ).
Connect to a power source with the included power adapter. The unit will enter standby mode, and the Power Button indicator will light up ( Fig.2 ).
USING YOUR LIGHT THERAPY LAMP
Power On / Off
- Tap the Power Button once to turn on / off the lamp.
- Press the + / – Button on the panel to choose the most comfortable brightness for you.
- If power is not disconnected, the lamp will remember the light brightness of last use when turned on again.
Note: Unplugging the lamp will reset the setting.
Set the Timer
Long press the Power button to set the timer for 30 minutes. The LED Indicator
will blink white when the timer is duly enabled. Long press the Power button
to disable the timer at any time.
Adjust the Light Brightness
Tap and hold the Light Brightness + / – Button to adjust the light brightness.
TROUBLESHOOTING
| Problem | Possible Cause | Solution |
|---|---|---|
| The lamp does not light up | No power supply | Correctly plug in the power |
adapter
The lamp is not turned on| Refer to the How to Use section
The touch panel is not responsive| Hands are wet| Touch the panel with dry
hands
Voltage fluctuation causing panel failure| Disconnect power to restart the
lamp
LED failure| LED component failed| Please contact the TaoTronics Support Team
Bad smell| Power adapter failed| Please contact the TaoTronics Support Team
| Short circuit| Please contact the TaoTronics Support Team
WARRANTY AND SERVICE
In case of any problem, please contact the TaoTronics Customer Care Centre via the contact information listed in this User Guide.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
[email protected]
www.taotronics.com
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China