Danfoss EV250B Solenoid Valve Installation Guide
- June 12, 2024
- Danfoss
Table of Contents
Danfoss EV250B Solenoid Valve
Product Information
Product: Solenoid valve Type EV250B
Model Numbers: 32F905.11, 32F903.11
Manufacturer: Danfoss
Manufacturer Address (UK customers only): Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB
Installation Guide: Included
Technical Data: Visit www.products.danfoss.com
Compliance: EN 60730-2-8
Product Usage Instructions
- Before installation, ensure that the solenoid valve is compatible with your system requirements.
- Refer to the installation guide for step-by-step instructions on how to install the solenoid valve.
- Make sure to turn off the power supply before installing or servicing the solenoid valve.
- Identify the appropriate model number (32F905.11 or 32F903.11) for your specific application.
- Check the recommended operating temperature range and pressure specifications for the solenoid valve.
- Connect the solenoid valve according to the provided guidelines, ensuring proper electrical and fluid connections.
- After installation, check for any leaks or malfunctions. If detected, consult the troubleshooting section of the installation guide or contact Danfoss customer support.
- Regularly inspect and maintain the solenoid valve as per the maintenance instructions provided in the installation guide.
- For further technical data or information, visit www.products.danfoss.com or contact Danfoss customer support.
Installation
DN
| MWP| Max. test pressure PT
---|---|---
[bar]| [psi]| [bar]| [psi]
10 – 22| 15.5| 225| 23.25| 337.5
Visit www.products.danfoss.com for further technical data
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>