PHILIPS 945561795 Ambiance Iris Table Lamp User Manual
- June 4, 2024
- Philips
Table of Contents
945561795 Ambiance Iris Table Lamp
User Manual
| 
---|---
How to get started
www.meethue.com/getstarted
www.meethue.com/bluetooth
www.meethue.com/philipshueapp
SAFETY INSTRUCTIONS – PART B
- The manufacturer advises the correct use of Luminaires (lighting fixtures)! Therefore always follow these instructions to ensure the correct and safe installation and functioning of the luminaire and keep it for future reference.
- Turn off electrical power at the main fuse or circuit breaker box before commencing installation, maintenance, or repair.
- If in doubt, consult a qualified electrician or contact your retail outlet. Ensure that you always install the luminaire to the local electrical code. Certain regulations indicate that luminaires should be installed by a qualified electrician.
- Observe the correct color of the wiring before installation: white (N), black (L), and green or bare copper wire (Ground).
- Do not connect this luminaire to a non-grounded electrical system.WARNING: Installing this fixture in a non-grounded electrical system could allow metal parts of the luminaire to carry electrical current if any wires or wire connections become broken or loose. Under this condition, anyone coming in contact with the luminaire is subject to an electric shock which could cause injury or death.
- Always use wire nuts/connectors rated for the correct gauge and number of wires used. CAUTION: Be certain that no bare wire strands are exposed outside of the wire nuts/connections (if applicable).
- Be careful not to damage or cut the wire insulation ( covering) during installation. Do not permit wires to contact any sharp edges.
- Do not remove thermal insulation pad(s). Doing so will result in increased temperatures and the possible risk of fire.
- Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. Avoid liquid on all electrical parts.
- Always consider all the technical specifications of the luminaire. Verify the stated icons on the identification label on the luminaire and the icons that are shown in part A of your safety instructions.
ATTENTION: Below you will find all the explanations with numeric reference to the icons respectively in front of these PART-B safety instructions. Applicable icons to your fixture are shown in PART-A safety instructions.
- This luminaire should only be installed indoors.
- The luminaire is suitable for outdoor usage.
- Only suitable for dry locations.
- Suitable for damp locations.
- Suitable for wet locations.
- Luminaire is suitable for base-up mounting.
- Luminaire is suitable for base-down mounting.
- Luminaire is suitable for horizontal mounting.
- The luminaire is only suitable for fixing the ceiling.
- The luminaire is only suitable for fixing the wall.
- The luminaire is suitable for fixing the wall and the ceiling.
- Always observe the minimum distance between the lamp and the surface being lit as indicated on the icon.
- Free air space of at least 4 inches must be kept between the top of the shade and the bottom of the canopy.
- Immediately replace a cracked or broken safety glass and use only manufacturer-approved parts.
- Strip the wire as indicated in the diagram.
- Use heat-resistant cable for wiring the luminaire into the mains.
- MAX …. W: only use lamps suitable for this luminaire and keep within the maximum specified wattage.
- This product is not suitable for children under 14 years
- The Luminaire has a ground conductor identified with green insulation or bare copper wire.
- The luminaire is only suitable for a lamp with built-in safety or a low-pressure lamp. Extra safety glass is not necessary.
- Capsule and linear halogen lamps may not be touched by bare hands.
- The luminaire is equipped with a fuse. If the luminaire is out of order after the bulb has been replaced, the internal fuse has to be replaced. If contact with the internal wiring can be made during this opera Cian, this should be done by a competent electrician.
- The luminaire can be used with a dimming circuit. Consult a qualified electrician for choosing the right type (especially important for low-voltage luminaires).
- The Luminaire cannot be used with a dimming circuit.
- The luminaire is dimmable with the supplied dimmer ONLY. Do not connect to an additional dimmer.
- The dimmability features depend on the chosen lamp. More information on disability features is available in the information pack provided with the bulb.
- Luminaire with time and light setting options. The minimum and maximum will be shown in the icon in part
- The luminaire can be placed at a maximum of 20k height.
- To reach optimal working, you have to place the luminaire at the height mentioned in the icon. The maximum and minimum reach of the detector is also mentioned in the icon in part
- The standard active range of vision of the detector covers the given degrees mentioned in the icon.
- Ensure that you don’t drill through electrical wires or any other obstruction in the wall or ceiling during installation!
- This luminaire contains in some places very hot parts.
- Product to be installed by two people.
- The product is for indoor use only. Do not use in wet locations, areas directly exposed to water, or outdoors.
- The product is ZigBee certified. Zigbee is an open standard for indoor wireless communication. All Philips ZigBee Certified products can be connected with other Philips ZigBee Certified products.
- Bluetooth 9 enabled product. The Bluetooth” word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Signify is under license. Other trademarks and trade names are those of their respective owners.
Signify warrants that this device will be free from defects in material and
workmanship and will operate for 2 years unless a different period is stated
in or on the pacl<aging of the product, based on up to 3 hours average working
time per day days per week when used as directed. If this device does not
conform to the warranty, Signify will send you, at its election, a replacement
device or refund your original price upon receipt of the returned device,
register receipt, and proof of purchase. Please call our toll-free number,
1.aJ0-555-0050, or write to us (address indicated on the pacl<aging) to find
out how to own the device. This limited warranty does not cover devices
subject to accident, neglect, abuse, misuse, or acts of God. REPLACEMENT OR
REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY. ABILITY FOR INCIDENT AL OR CONSEQUENTIAL DAMAGES IS HEREBY
EXPRESSEL Y EXCLUDED. Some states and provinces do not
allow the exclusion of incidental or consequential damages, so the above
limitation or excursion may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from
state to state and province to province. Philips and the Philips Shield Emblem
have registered trademarks of Koninklijke Philips N.V. Alterations in design
and technical specifications are reserved. “Hue Personal Wireless Lighting” is
a trademark owned by Signify Holding B. V.
Please go to www.meethue.com to learn more about Hue
and how to use it FCC ID: 2AGBW9290019684X / 2AGBW9290019683X /
2AGBW9290012630X IC: 20812-9684X / 20812- 9683X / 208l2-2630X
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
IC Certification:
– Hue Engine: company number· 20812 UPN 9683X / 20812 UPN 2630X This Class B
digital apparatus complies with CAN ICES- 3(8)/ NMB- 3(8).
This digital apparatus does not exceed the Class B limits for radio-noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
NOTICE: Changes or medications made to this device not expressly approved
by Signify North America Corporation (USA) and Signify Canada Ltd/Signify
Canada Ltee. (Canada) (collectively “Signify”) may void the U.S FCC and
Canadian authorization to operate this device. The advanced interface module
complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This device should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body The manufacturer is not
responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment However, there is no guarantee that
interference will not occur in a particular installation. If this device does
cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user 1s encouraged to try to
correct the interference by one or more of the following measures·
- Reorient or relocate the receiving antenna
- Increase the separation between the device and the receiver
- Connect the device to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/television technician for help
Bluetooth’ enabled product
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG.Inc. and any use of such marks by Signify is under license Other
trademarks and trade names are those of their respective owners. Manage in
accordance with disposal laws in your area “Hue Personal Wireless Lighting” is
a trademark owned by Signify Holding B.V.
Wireless Specification:
Wireless RF mode frequency band 2400-2483.5 MHz
Wireless communications protocol IEEE 802.15.4
Operating channels Zigbee: channels 11 – 26
Operating channels Bluetooth channels 0-39
Signify North America Corporation 200 Franklin Square Drive Somerset, NJ
08873, USA
Signify Canada Ltd./Signify Canada Ltee.
281 Hillmount Road, Markham, ON, Canada L6C 2S3
Questions or Comments / Questions ou commentaires :
1-800-555-0050
www.meethue.com
lmportardo y/o distribuido en Mexico por: Signify Mexico S.A. de C.V.
Av. La Palma N° 6-Col. San Fernando, La Herradura HuixquilucanEdo. De Mexico,
C.P. 52784 – R.F.C. PME-620620-E84 Centro de contacto
01-800-508-9000
© 2019 Signify Holding 4404 029 11881
Last update: 26/06/2019
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>