ADJ FS3000LED 300W COB LED Follow Spot Light User Manual

FS3000LED

User Manual
US SKU#: FS3000
EU SKU#: 1237000304
UPC#: 818651028256

©2021 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands, and product names are trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

https://qrs.ly/2vbr0rs

DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of this document may be available online. Please check www.adj.com for the latest revision/update of this manual before beginning installation and/or programming.

Date| Document Version| Software Version >| DMX Channel Mode| **Notes**
---|---|---|---|---
08/11/20| 1.0| 1.0| 1 / 3 / 6 Ch| Initial Release
03/05/21| 2.0| N/C| N/C| Updated Features
06/10/21| 3.0| 1.01| N/C| Updated System Menu to add RDM

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to helping to protect the environment. Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!

Introduction:

Congratulations on your purchase of the ADJ FS3000LED! This device is a powerful and feature-packed follow spot powered by a 300W white C.O.B. (Chip On Board) LED with a color temperature of 6000K. The FS3000LED has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this device. These instructions contain important information regarding safety during use and maintenance.

Please keep this manual with the device for future reference.
Customer Support: Contact ADJ Service for any product-related service and support needs. Also visitforums.adj.com with questions, comments or suggestions.
Parts: To purchase parts online visit:
http://parts.adj.com (US)
http://www.adjparts.eu (EU)
ADJ SERVICE USA – Monday – Friday 8:00am to 4:30pm PST
Voice:800-322-6337 | Fax: 323-582-2941 | [email protected]
ADJ SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax 323-532-2941 | www.adj.com | [email protected]
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
+31 (0)45 546 85 00 | Fax +31 45 546 85 99
www.adj.eu | [email protected]
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
+52 728-282-7070
WARNING! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
CAUTION! There are no user-serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, please contact ADJ Products, LLC. Do not discard the shipping carton in the trash. Please recycle whenever possible.

Features

• Beam angle: 12~32-degree manually adjustable

• Color touch screen display with selectable settings

• Manual Dimming Potentiometer

• Manual Zoom

• Manual Focus

• Manual Iris

• Fan cooling

• Hanging Bracket

• Compatible with ADJ UC IR wireless remote
  Included Items:

• Power cable with locking connector (x1)

• 4-slot Boomerang (x1)

• Wireless remote control (x1)

• “B” size gobo holder (x1)

• Metal gobo (x1)

• Donut (x1)

• Thumbscrews (x4)

Warranty Registration

The FS3000LED carries a 2-year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items, whether under warranty or not, must be freight prepaid and accompanied by a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem, as well as the R.A. number, must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain an R.A. number by contacting our customer support team. All packages returned to the service department not displaying an R.A. number on the outside of the package will be returned to the shipper.

Safety Guidelines

For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You Attempt To Install Or Operate This Unit!

• Be sure to save the packing carton in the unlikely event the device may have to be returned for service
• Do not spill water or other liquids into or onto the device
• Be sure that the local power outlet matches the required voltage for the device
• Do not open up the device under any conditions. There are no user-serviceable parts inside
• Disconnect the device’s main power when left unused for long periods of time
• Never connect this device to a dimmer pack
• Do not attempt to operate this device if it has been damaged in any way
•  Never operate this device with the cover removed
• To reduce the risk of electrical shock or fire, do not expose this device to rain or moisture
• Do not attempt to operate this device if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short
• Disconnect from the main power before making any type of connection
• Never block the ventilation holes. Always be sure to mount this device in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall
• This unit is intended for indoor use only. Use of this product outdoors voids all warranties
• Always mount this unit in a safe and stable matter
• Please route your power cord out of the way of foot traffic. Power cords should be routed so they are not likely to be walked on, or pinched by items placed upon or against them
• Ambient operating temperature ranges is from 14°F to 113°F (-10°C to 45°C). Do not operate this device when the ambient temperature falls outside of this range!
• Keep flammable materials away from this fixture!
• THE FIXTURE IS DESIGNED FOR INDOOR USE ONLY! DO NOT EXPOSE TO RAIN OR MOISTURE!
• The device should be serviced by qualified service personnel when:
  A. The power-supply cord or the plug has been damaged.
  B. Objects have fallen on, or liquid has been spilled into, the device.
  C. The device has been exposed to rain or water.
  D. The appliance does not appear to operate normally or exhibit a marked change in performance.

Overview

1. Iris Adjustment
2. Gobo Holder
3. Zoom Adjustment
4. Focus Adjustment
5. 4-slot Boomerang
6. Side Handle
7. Bracket Adjustment
8. Mounting Bracket
9. Mounting Clamp Attachment Point
10. Rear Handles
11. Safety Cable Attachment Point| 12. 5-pin DMX In
13. 3-pin DMX In
14. IR Signal Receiver
15. Service Port
16. 3-pin DMX Out
17. 5-pin DMX Out
18. Power Out
19. Power In
20. Fuse 250V/3A
21. Intensity Adjustment
22. Display Screen
---|---

Installation

FLAMMABLE MATERIAL WARNING!
Keep drive a minimum of 5.0 feet (1.5m) away from flammable material and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!
The unit MUST be installed following all local, national, and country commercial electrical and construction codes and regulations.
Before installing or mounting any device, a professional equipment installer MUST be consulted to determine whether the mounting structure or surface is properly certified to safely support the combined weight of the fixture, clamps, cables, and accessories.
Overhead fixture installations must always be secured with a secondary safety attachment, such as an appropriately rated safety cable that meets all local, national, and country codes and regulations. The ambient operating temperature range is from 14°F to 113°F (-10°C to 45°C). Do not operate this device when the ambient temperature falls outside this range. This fixture should be installed in areas outside walking paths, seating areas, or away from areas where unauthorized personnel might be able to reach the device by hand. NEVER stand directly below the fixture when rigging, removing, or servicing.
Allow approximately 15 minutes for the fixture to cool down before servicing.
CLAMP INSTALLATION
This fixture features a mounting clamp attachment point, which is located on the mounting yoke, as well as a safety cable rigging point, located near the display screen (see the illustration below). When mounting the fixture to a truss or any other suspended or overhead installation, be sure to secure an appropriately rated clamp (not included) to the clamp attachment point and attach a separate SAFETY CABLE of the appropriate safety rating to the safety cable rigging point.

SAFETY CABLE
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF THE CLAMP FAILS.

RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working load limits, understanding the installation material being used, and periodic safety inspection of all installation material and the fixture itself. If you lack these qualifications, do not attempt to perform the installation yourself. Improper installation can result in bodily injury.
Gobo Installation
In order to install and use the included Gobo Holder, follow the directions shown below:

1. Remove the Gobo Holder from its slot. The Gobo Holder handle is the ring-shaped item located just aft of the Iris Adjustment lever.

2. Unscrew the retainer screw from the Gobo Holder.

3. Open up the Gobo Holder. Slide the Glass Gobo between the two halves of the Gobo Holder, making sure that the Glass Gobo has been placed securely in its cutout.

4. Close the Gobo Holder. Replace and tighten the retainer screw.

5. Re-insert the Gobo Holder back into its slot on the fixture. Make sure that the retainer screw on the Gobo Holder is facing backward (towards the control screen).

4-slot Boomerang

A 4-slot Boomerang attachment is included in this device. Follow the steps listed below to install this accessory onto your device.

1. Slide the 4-slot Boomerang onto the lens end of the fixture. Hook the installation bracket of the 4-slot Boomerang over the thumbscrews. The notched slots on the installation bracket of the 4-slot Boomerang should slide on smoothly and then drop down into place over the thumbscrews.

2. Tighten the thumbscrews to secure the 4-slot Boomerang in place.

SYSTEM MENU

The device includes an easy-to-navigate system menu that can be accessed via controls on the touchscreen display panel.

| The BACK button is used to return to the previous menu.
---|---
| The UP and DOWN buttons are used to adjust the value of a particular setting or to
cycle through different menu options.
| The ENTER button is used to enter a menu or adjustable setting.

|

DMX SETTINGS

| DMX  Address| 001 – 512| |
---|---|---|---|---|---
DMX Channel Mode| 1-channel| |
3-channel| |
6-channel| |
No DMX Status| Hold Last| |
Blackout| |
Manual Settings| |
| PERSON- ALITY| Primary| ON / OFF| |
Secondary| ON / OFF| |
Dim Modes| Standard| |
Stage| |
TV| |
Architectural| |
Theatre| |
Stage 2| |
Dim Delay| 0 – 99|
Dim Curves| Linear| |
Square| |
Inv. Sq.| |
S-Curve| |
LED Refresh Rate| 900 Hz, 1000Hz, 1100 Hz, 1200 Hz, 1300 Hz, 1400 Hz, 1500 Hz, 5000 Hz, 15000 Hz
Display| Screen Saver Delay| OFF, 1 – 10 seconds
Touch Screen Lock| OFF, 1 – 30 seconds, 1 min
Rotate Display 180| YES / NO|
Language| Passcode (050)| English|
Spanish|
Service| Passcode (011)| Factory Restore| YES / NO
CONTINUED ON NEXT PAGE

| PERSONAL- CITY

(continued from prev page)

| Service| Passcode (011)| Factory Restore| YES / NO
---|---|---|---|---|---
USB Port Power| OFF / ON
RDM| On / Off| |
| MANUAL CONTROL| See the Manual Control section of this manual

| INFORMA- TION| LED Tem- perature| xxx F / xxx C| |
Software Version| x.xx| |
RDM UID| xxxxxx| |

DMX Traits

1-CHANNEL MODE

ADJ FS3000LED DMX TRAITS

Software Version: > 1.0
CHANNEL| VALUES| TRAITS
1| 000 – 255| Dimmer intensity: 0 to 100%

3-CHANNEL MODE

ADJ FS3000LED DMX TRAITS

Software Version: > 1.0
CHANNEL| VALUES| TRAITS
**** 1| STROBE
000 – 031| No function (shutter closed)
032 – 063| Shutter open
064 – 095| Strobe, slow to fast
096 – 127| Shutter open
128 – 159| Pulse effect, slow to fast
160 – 191| Shutter open
192 – 223| Random strobe, slow to fast
224 – 255| Shutter open
2| 000 – 255| Dimmer intensity, 0 to 100%
3| 000 – 255| Dimmer fine 16-bit, 0 to 100%

6-CHANNEL MODE

ADJ FS3000LED DMX TRAITS

S oftware Version: _> 1.0_
CHANNEL| VALUES| TRAITS
**** 1| STROBE
000 – 031| No function (shutter closed)
032 – 063| Shutter open
064 – 095| Strobe, slow to fast
096 – 127| Shutter open
128 – 159| Pulse effect, slow to fast
160 – 191| Shutter open
192 – 223| Random strobe, slow to fast
224 – 255| Shutter open
2| 000 – 255| Dimmer intensity, 0 to 100%
3| 000 – 255| Dimmer fine 16-bit, 0 to 100%
**4**| DIM MODES
000 – 020| Standard
021 – 040| Stage
041 – 060| TV
061 – 080| Architectural
081 – 100| Theatre
101 – 120| Stage 2
DIMMING SPEED
121| 0.1 s
122| 0.2 s
123| 0.3 s
124| 0.4 s
125| 0.5 s
126| 0.6 s
127| 0.7s
128| 0.8 s
CONTINUED ON NEXT PAGE

6-CHANNEL MODE (continued from the previous page)

**** 5

| DIM CURVES
000 – 020| Linear
021 – 040| Square
041 – 060| Inv. Squad
061 – 080| S. Curve
081 – 255| No function
**** 6| LED REFRESH RATES
000 – 010| Normal operation (Default LED refresh rate of 1200 Hz)
011| 900 Hz
012| 910 Hz
013| 920 Hz
014| 930 Hz
015| 940 Hz
016| 950 Hz
017| 960 Hz
018| 970 Hz
CONTINUED ON NEXT PAGE

6-CHANNEL MODE (continued from the previous page)

page)
019| 980 Hz
020| 990 Hz
021| 1000 Hz
022| 1010 Hz
023| 1020 Hz
024| 1030 Hz
025| 1040 Hz
026| 1050 Hz
027| 1060 Hz
028| 1070 Hz
029| 1080 Hz
030| 1090 Hz
031| 1100 Hz
032| 1110 Hz
033| 1120 Hz
034| 1130 Hz
035| 1140 Hz
036| 1150 Hz
037| 1160 Hz
038| 1170 Hz
039| 1180 Hz
040| 1190 Hz
041| 1210 Hz
042| 1220 Hz
043| 1230 Hz
044| 1240 Hz
045| 1250 Hz
046| 1260 Hz
047| 1270 Hz
C ONTINUED ON NEXT PAGE

6-CHANNEL MODE (continued from the previous page)

6(continued from prev page)

| DIMMING SPEED (continued from prev page)
048| 1280 Hz
049| 1290 Hz
050| 1300 Hz
051| 1310 Hz
052| 1320 Hz
053| 1330 Hz
054| 1340 Hz
055| 1350 Hz
056| 1360 Hz
057| 1370 Hz
058| 1380 Hz
059| 1390 Hz
060| 1400 Hz
061| 1410 Hz
062| 1420 Hz
063| 1430 Hz
064| 1440 Hz
065| 1450 Hz
066| 1460 Hz
067| 1470 Hz
068| 1480 Hz
069| 1490 Hz
070| 1500 Hz
071| 2500 Hz
072| 4000 Hz
073| 5000 Hz
074| 6000 Hz
075| 10,000 Hz
076| 15,000 Hz
CONTINUED ON NEXT PAGE

6-CHANNEL MODE (continued from the previous page)

6(continued from prev page)

| DIMMING SPEED (continued from prev page)
077| 20,000 Hz
078| 25,000 Hz
079| Disable LED refresh rate
080 – 255| No function

Manual Mode

The screen shown above is displayed when Manual Mode is selected from the main system menu. The operation of the fixture in Manual Mode is outlined below:
Fade ON: Defines the period of time during which the fixture will ramp up when the ON button is selected. Value can be changed using the UP and  DOWN buttons. Allowable values range from 0.0 to 30.0 seconds, in 0.1-second intervals.
Fade OFF : Defines the period of time during which the fixture will ramp down when the OFF button is selected. Value can be changed using the UP and DOWN buttons. Allowable values range from 0.0 to 30.0 seconds, in 0.1-second intervals.
Intensity: Value is adjusted using the intensity knob located to the right of the display screen. Allowable values range from 0 to 100%, in increments of 1%.
PRG: Toggles between the Fade ON and Fade OFF settings.
ON / OFF: Switches the main lamp on or off. Note that the ramp time corresponds to the values defined in the Fade ON and Fade OFF settings.

Dimensional Drawings

Dimensions may not be drawn to scale.

Specifications

Light Source:

• 300W white C.O.B. (Chip On Board) LED
• Color temperature: 6000K
• CRI: 95
• Light Output (12-degree): 6558 LUX @ 5M; 1639 LUX @ 10M; 410 LUX @ 20M
• Total Lumen Output: 8500 lm

Features:

• Beam angle: 12~32-degree manually adjustable
• Color touch screen display with selectable settings
• Manual Dimming Potentiometer
• Manual Zoom
• Manual Focus
• Manual Iris
• Fan cooling
• Hanging Bracket
• Compatible with ADJ UC IR wireless remote

GOBO:

• GOBO holder with metal break apart pattern GOBO
• Gobo Dimensions: Outer 74.5mm; Inner: 65mm; Thickness: 2mm

Electrical:

• Voltage: AC100V-240V/50Hz-60Hz
• Maximum Power: 340W

Connections:

• 3-pin and 5-pin DMX data linking
• PowerLock In/Out to daisy chain power (3 fixtures max at 110V, 5 fixtures max at 240V)
• USB Input for firmware update

Dimensions & Weight:

• Dimensions (LxWxH): 33.5” x 12.25” x 7” / 850x310x180mm
• Weight: 26.5” / 12kg.

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

Limited Warranty (USA Only)

MANUFACTURER’S LIMITED WARRANTY
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or services (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point
within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic check-up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the
product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements to its products without any obligation to include these changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties
and written descriptions of warranty terms and conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• Non-L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, etc. excluding LED and lamps)

• Laser Products = 1 Year (365 Days) Limited Warranty (excluding laser diodes which have a 6-month limited warranty)

• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180-day limited warranty).
  Note: 2 Year Warranty only applies to purchases within the United States.

• StarTec Series = 1 Year Limited Warranty (excluding batteries that have a 180-day limited warranty).

• ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty

ADJ Products, LLC – www.adj.com
– FS3000LED User Manual

References

• Topics | ADJ Forums
• ADJ Product Parts - Lighting Online Parts Store
• Home
• ADJ Supply Europe
• ADJ Partsshop - Service is our passion!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>