Danfoss AK-PC 782B Pack Controller Installation Guide
- June 12, 2024
- Danfoss
Table of Contents
Danfoss AK-PC 782B Pack Controller
Product Information
The product is the Pack Controller, type AK-PC 782B with USB-B.
It is manufactured by Danfoss and has the model number 080R9351
AN412826307589en-000201. The controller has AI x 11 (analog input) and DO x 8
(digital output) capabilities. It operates on a supply voltage of 24 V AC/DC
and has a transformer Class II.
The controller has various terminals and connections, including LAN* (not used), IO Extension, SPDT (Single-Pole Double-Throw) relay, and AKV coil 110/230 V. It also supports different signal types such as P (pressure), U (voltage), and Pt 1000.
It is important to note that the 24 V input should not be shared by other controllers or units, and it must not have an earth connection. Additionally, low and high voltage must not be connected to the same output group to ensure safety.
Product Usage Instructions
- Before adding or removing modules, ensure that the power is disconnected.
- Connect the controller to a suitable power source with a supply voltage of 24 V AC/DC.
- Make sure that the 24 V input does not have an earth connection.
- Connect any required analog input devices to the corresponding terminals based on the signal type and active state mentioned in the manual.
- Connect any required digital output devices to the corresponding terminals based on the signal type and active state mentioned in the manual.
- If using the LAN feature, use a shielded twisted pair CAT5 cable for connection.
- For any external switches or devices that need to be connected, follow the specified active state (e.g., Closed/Open, ON/OFF).
- Dispose of the product and any electrical components according to local and currently valid legislation. Do not dispose of them with domestic waste; they should be separately collected as electrical and electronic waste.
Please refer to the user manual for additional information and specific usage instructions.
Pack Controller
type AK-PC 782B with USB-B
INSTRUCTION
Point
The Product contains electrical components
And may not be disposed together with domestic waste.
Equipment must be separate collected with Electrical and Electronic waste.
According to Local and currently valid legislation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>