SQ23 Wi-Fi Mini DV Camera User Manual

SQ23 Wi-Fi Mini DV Camera

USER MANUAL

Upgrage Version SQ23:  Improved mini hidden camera based on  SQ13 , increased with built-in magnet, 360 degree rotatable stent (base + strong magnetic ring + 3M glue), strong magnetic adsorption, can be placed everywhere you want.

Professional glass lens:  HD glass lens provides more delicate images and dynamic videos.

Wireless Wi-Fi:  Support ISO/Android/Windows. Real-time transmit videos to mobile device, 20 meters without barriers to mobile phones without the need for routers and broadband.

HD Night Vision:  Strengthened night vision function with 8 IR Lights, 5m to 8m visible in the darkness. Focus clarity, the video is clear to be seen at night. The infrared distance up to 8m, regardless of day or night at a glance. A key to turn on/off the infrared function, shut down when not in use.

Intelligent Motion Detection:  Recording abnormal condition at any time

Wide Angle Shooting:  155 degrees beyond the wide angle, the view is more wide, the scene is more beautiful

30 Meter Waterproofing:  Professional deep waterproof allows you to take photos under the water

Instructions

1. Power Key
2. Mode Key
3. USB Interface
4. TF Card Slot
5. HD camera
6. Infrared lamp
7. Power On LED
8. Night vision LED
9. Wi-Fi LED
10. Video / Photograph LED

 Indicator light

1.  Red light:  Power-on/Standby.  Blue light:  Video Recording/Photograph.  Green light:  Wi-Fi On.

2.  No TF Card:  Under the case of Wi-Fi Off, red light flashing 5 times then Power Off. Under the case of wifi on, the green light bright.

3.  Bulit-in TF card:  Under the case of Wi-Fi Off and standby, red light bright, auto Power Off after no operation within 1 min.

4.  Low Power:  Auto power off after red light flashing 2 seconds.

Power On/Off:  after long press the [Power Key] for 3 seconds, red light bright enter standby status, red light flashing once when device built in TF card. Power Off after long press [Power Key] and red light flashing 5 times

Photograph:  Under the case of standby status, shortly press [Power Key], the red light flash once, picture done and saved, auto return to standby status.

Video recording:  Under the case of standby, shortly press the [Mode Key], blue light flashing and enter the mode of video recording, shortly press the [Mode Key] again, auto video save and blue light off, auto return to standby status.

IR light:  Under the mode of video recording, long press [Mode Key] for 3 seconds,yellow light bright and IR light on, long press [Mode Key] for 3 seconds again, yellow light and IR light Off. Auto return to video recording mode and blue light flashing.under the case of IR light on but stop video recording, IR light auto Off and return to standby status.

APP Download:  Android mobile phone or tablet PC in android market/Baidu mobile assistant/ Google play store search “SPORTS DV” download. IPhone mobile phone in App Store search “SPORTS DV” download. It can also be downloaded and installed by scanning instructions or two-dimensional codes on the outer packing box.

QR code:

WiFi Mode

1.  No TF Card and Wi-Fi On:  Under the case of standby, long press [Mode Key] for 3 seconds, green light bright and WiFi On, or over 8 seconds auto Power Off.
2.  Bulit in TF card and Wi-Fi Off:  Under the case of standby, long press [Mode Key] for 3 seconds, green light bright and Wi-Fi On. Long press [Mode Key] again for 3 seconds, green light and Wi-Fi Off.

Wi-Fi connection:
1. Wi-Fi connecting: connecting the network start with “ SQ23 ” like (SQ13) in the setting of mobile or tablet Wi-Fi; the default password is “ 12345678 “.
2. When TF card built in and successfully connect Wi-Fi, green light On. Open the APP and click “PLAY” enter the interface, it support to operate the video recording/Photograph on App as well as operate by the device button. If meet other problem, please click HELP to inquiry.

Note: the video recording will stop if out of APP or return back the interface when watching video recording.

Change password:  open the phone App and change it in the Settings. After the password is changed, the device needs to be restarted before it takes effect.

IR light:  Under the case of Wi-Fi video recording, long press [Mode Key] for 3 seconds, yellow light bright and IR light On, long press key again for 3 seconds, yellow light and IR light Off.

Note: Only choose save video to TF card IR light can be open, it can’t be open when choose to save video on phone which would make Wi-Fi Off

USB:  Connecting to the computer under any case with USB cable, then enter the USB mode, now you can operate the disk, the Wi-Fi is off under this mode.

Charging:  Built-in can charge Li-battary, if this is your first time use the device, you need charge first with following ways:
1. Charging by connecting to computer with USB cable.
2. Recording and charging at same time.(connected USB 5V charger or power bank)
3. The red light is slow flash when charging, red light will long bright after charging finished. (You can charging more 30 mins to make sure the charging is 100% full.)

Recording when charging:  connecting to the charger, device will power on automatically, then the next step is same with power on operation.Under the case of this mode, the device will not power off if no TF card or the card is full.

Time setting:

Time will be updated after device connect Wi-Fi, please operate on App if no need the watermark of time.
Pay attention:
1. Please ensure insert TF card, if no card, device can’t be used (but can be used if under the case of Wi-Fi On)
2. Please keep the lens at the distance of 50cm or more in a fully illuminated environment. This will be correct, the color is natural, the scenery is clear and the picture is stable.

**Connect computer:

**

The device can be connected to the computer under the case of power on, standby and Power Off, and the device can use be USB flash for the file copy, paste, delete and format.
Connect the device to USB port of computer, the red light will long bright wh en the computer identify the device. You can make the data transmission wh en the red light slow flash with the sign of removable disk.

Note:
1. After the unit is connected to the computer, if the computer can not recognize it or the removable disk is not ejected after 30 seconds, reset it again and again.
2. Recommended TF card reader directly to read the video file to play, and directly through the USB connection to save the machine built-in memory in the video file, the data may be too large, the transmission can not keep up, and lead to playback is not smooth

Specification

– Model:  SQ23
– Material: ABS+Aluminum
– Type: HD Car DVR Recorder
– Chipset name: Generalplus
– Chipset: Generalplus GPCV4247
– System Requirements: Mac OS x 10.3.6 or higher, Win 7, Win 8, Windows 2000 / XP / Vista
– Image Sensor: CMOS
– Features: HD, mini, delayed shutdown, cycle recording, night vision, time stamp, Wi-Fi
– Charging mode: USB charging via PC
– Working time: 90 minutes
– Battery charging time: 2 – 3 hours
– Working voltage: DC 5V
– Wide angle: 155 degrees wide angle
– Lens size: 2.33mm
– Camera Pixel: 3MP
– Decoding format: H.264
– Video format: AVI
– Video resolution: 1080P (1920 x 1080), 1440 x 1080, 720P (1280 x 720)
– Video frame rate: 30fps
– Image format: JPG
– Image resolution: 1.3M (1280 x 960), 2M (1920 x 1080), 3M (2048 x 1536), VGA (640 x 480)
– Audio system: built-in microphone / speacker (AAC)
– Wi-Fi network frequency: 2.4GHz
– Wi-Fi distance: 10m
– Cycle time recording time: 5 minutes
– Night vision distance: 3 – 5m
– Working temperature: -10 – 50 degrees Celsius
– Power cord length: 75 cm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>