EPSON ELPDC30 DC-30 Document Camera User Guide

: October 30, 2023
: Epson

Table of Contents

Setting up the product
Using the product
Using the software
Registration
Where to get help
Notices
Wireless Product Safety Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Epson® DC-30 Document Camera (ELPDC30)
Quick Start

IMPORTANT: Before using the product, make sure you read these instructions and the safety instructions in the online User’s Guide.
Follow these instructions to display pages from books and documents, and three-dimensional objects. For instructions on using the microscope adapter and other features, see the online User’s Guide.

Setting up the product

Raise the camera arm with one hand while holding the base with your other hand.
Position the camera head above the projection area.
Connect the document camera directly to your projector using the included HDMI cable. Or, use the included USB cable to control your document camera from a computer using the camera software (see “Using the software”).
Note: You can also connect to your projector wirelessly using Miracast® (see the online User’s Guide for details).
Connect the power adapter and plug it into an electrical outlet.
Press the power button to turn on the document camera.
Turn on your projector. Then select the source (port) on the projector that lets you display the camera image. On the document camera, press the DC/PC button, if necessary.

Using the product

Place your document on the table under the camera head. Adjust the camera head and arm if needed.
Press the Lamp button to illuminate the document.
Press the AF button on the document camera or remote control. Your document is automatically focused.
To zoom in or out on part of the image, press the Zoom button on the document camera or remote control.
Note: For more information on using the remote control, see the online User’s Guide.
If a computer is connected to the document camera, you can use the DC/PC button on the document camera or remote control to switch between the computer image and the image from the document camera.

When you’re done using the product, turn it off and lower the camera arm as shown.

EPSON ELPDC30 DC 30 Document Camera - lower the camera

Using the software

You can use the Easy Interactive Tools software to capture live audio and video, as well as still images. You can also use it to make time-lapse movies, annotate captured images, and upload your videos to popular websites.
The Epson Connect Tool for Document Camera software lets you use Miracast to send images from the document camera to your projector. See the online User’s Guide for details.
Installing the software
Note: An Internet connection is required to obtain the product software.

Download and run your product’s software package:
http://epson.com/support/dc30downloads (U.S.)
http://epson.ca/support/dc30downloads (Canada)
Follow the instructions on the screen to run the setup program.

Using Easy Interactive Tools

Connect the document camera to your computer with the included USB cable.

Note: Make sure to connect to a USB 2.0 port on the computer.
Connect the computer to your projector with an HDMI or VGA cable.
Note: The cable used to connect may differ depending on the computer and projector you are using.
On Windows® , hold down the Windows key and press P at the same time, then click Duplicate.
If you are using a Mac laptop with macOS 13, select System Settings > Displays. Press the + pop-up menu button, then choose a display to mirror.
On macOS 12, select System Preferences > Displays > Display Settings.
Select the projector, then choose the mirror option for your display from the dropdown menu.
On macOS 11 and older, open System Preferences and select Displays.
Click the Arrangement tab and select the Mirror Displays checkbox.
On your computer, open Easy Interactive Tools.
The Home screen is displayed.
Click the Other Tools icon and select the Camera option. Select the document camera from the dropdown menu in the lower left corner of the screen, then use the application’s toolbar to record a still image, time-lapse movie, or video.

For additional instructions, see the online Easy Interactive Tools Operation Guide.
Using Epson Connect Tool for Document Camera

Connect the document camera to your computer with the included USB cable.
On your computer, open Epson Connect Tool for Document Camera.
On the screen that appears, open the dropdown menu and select the document camera.
Select the projector you want to connect via Miracast and click Connect. Once the connection is made, the image captured by the document camera is projected by the projector.

Note: For Epson projectors, you need to select Screen Mirroring as the source to connect via Miracast.

Registration

Register today to get product updates and exclusive offers. You can register online at http://epson.com/webreg.

Where to get help

Manuals
For more information about using the product, you can view or download the online manuals from the Epson website, as described below.
Internet support
Visit http://epson.com/support/dc30downloads (U.S.) or
http://epson.ca/support/dc30downloads (Canada) to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.
Telephone support
To use the Epson PrivateLine® Support service, call (800) 637-7661 (U.S. and Canada). This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 7 a.m. to 4 p.m., Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Notices

Supplier’s Declaration of Conformity

According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:
We: Epson America, Inc.
Located at: 3131 Katella Ave., Los Alamitos, CA 90720
Telephone: (562) 981-3840
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.906. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: Epson
Type of Product: Document Camera
Model: ELPDC30
Marketing Name: DC-30
Options: Remote control 1913835xx (x = 0-9)
According to 47CFR, Part 2 and 15 for Class B external switching power supplies:
We: AVer Information Inc.
Located at: 668 Mission Ct., Fremont, CA 94539
Telephone: (408) 263-3828
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.906. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: FSP
Type of Product: Switching Power Adapter
Model: FSP015-DPAN3

Wireless Product Safety Instructions

Contains wireless dongle model: PW00U
This document provides safety instructions and describes the specifications. Read this document carefully before use to ensure your safety and product performance. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment. This equipment should be installed and operated with a distance of at least 7.9 inches (20 cm) between the radiator and your body. This equipment is restricted to indoor operation only. Do not use the wireless
communication function near automatically controlled devices such as automatic doors or fire alarms. The electromagnetic waves may cause electromagnetic interference with equipment or cause the equipment to malfunction.
U.S. FCC Notices
Contains FCC ID: 2AHDGPW00U
Operating frequency range: 2.402-2.480GHz (Bluetooth®), 2.412-2.462GHz (11b/g/n), 5.180-5.240GHz, 5.260-5.320GHz, 5.500-5.700GHz, 5.745-5.825GHz (11a/n/ac) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits. Data transmission is always initiated by software, which is then passed down through the
MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated with a distance of at least 7.9 inches (20 cm) between the radiator and your body.
Innovation, Science and Economic Development Canada (ISED) Notices

Contains IC (ISED ID): 21367-PW00U
Operating frequency range: 2.402-2.480GHz (Bluetooth), 2.412-2.462GHz (11b/g/n), 5.180-5.240GHz, 5.260-5.320GHz, 5.500-5.700GHz, 5.745-5.825GHz (11a/n/ac) CAN ICES-3 (B)/NMB-3 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
This equipment should be installed and operated with a distance of at least 7.9 inches (20 cm) between the radiator and your body.
Epson America, Inc. Limited Warranty

A. What Is Covered: Epson America, Inc. (“Epson”) warrants to the purchaser of the Epson product enclosed with this limited warranty statement that the product, if purchased and operated in the United States, Canada, or Puerto Rico, will be free from defects
in workmanship and materials for a period of two (2) year from the date of original purchase.
B. What Epson Will Do To Correct Problems: If your product requires service during the limited warranty period, please call Epson at the number at the end of this statement and be prepared to provide the model, serial number, and date of original purchase.
This line will be answered during Epson’s regular support hours (currently 7:00 a.m. to 4:00 p.m., Pacific Time, Monday through Friday—subject to change without notice). If Epson confirms warranty service is required, Epson will, at its option, repair or replace the defective unit without charge for parts or labor.
If Epson authorizes an exchange for the defective unit, Epson will ship a replacement product to you, freight prepaid, as long as you use an address in the United States, Canada, or Puerto Rico. The replacement product may be new or refurbished to the Epson standard of quality. (The replacement product may not include promotional materials, accessories, documentation, manuals, software, or cables.) You are responsible for securely packing the defective unit and returning it to Epson within five (5) working days of receipt of the replacement. Epson requires a debit or credit card number to secure the cost of the replacement product if you fail to return the defective one.
If Epson authorizes repair instead of exchange, Epson will direct you to send your product to Epson or its authorized service center, where the product will be repaired and sent back to you. You are responsible for packing the product and for all postage and shipping costs to and from the Epson authorized service center. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. If service cannot be provided on the product for any reason during the term of this agreement and Epson no longer sells the same model, Epson will replace the product with a model of equal or superior value. Epson’s liability for replacement of the covered product will not exceed the original retail selling price of the covered product. Replacement products or parts assume the remaining warranty period of the product covered by this limited warranty.

C. What This Warranty Does Not Cover

Any damage caused by misuse, abuse, improper installation, or neglect; disasters such as fire, flood, or lightning; or improper electrical currents, software, or interaction with non-Epson products.
Any damage caused by or any service for third-party software, applications, parts, components, or peripheral devices added to the product after its shipment from Epson, such as dealer- or user-added boards, components, or cables.
Any damage caused by installing the product next to a heat source or directly in the path of an air vent or an air conditioner.
Damage due to excessive, continual usage.
Damage caused by failure to properly maintain the product (see your User’s Guide for details).
Service when the product is used outside the United States, Canada, or Puerto Rico.
Service if the product label, logo, rating label, or serial number has been removed.
Consumables such as filters or any items that are identified as being replaceable by the user in the product documentation (see your User’s Guide for details).
Loss of data.
Installation or removal.
Any damage from service performed by anyone other than an Epson-authorized servicer.
Damage resulting from operation or storage in areas with smoke, oil, high humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock.
Cosmetic damage caused by handling or normal wear and tear during use.
Any product or parts purchased as used, refurbished, or reconditioned.
Any damage caused by using improper packaging materials or improper packing and shipping when returning a product for repair or replacement. You will be invoiced for such shipping damage to the product.

If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred. Epson is not responsible for your data or applications, which cannot be restored and should be backed up by you. Postage, insurance, or shipping costs incurred in presenting your Epson product for carry-in warranty service are your responsibility. This warranty is not transferable.
D. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS

Disputes: The terms of this Section D shall apply to all Disputes between you and Epson. The term “Dispute” is meant to have the broadest meaning permissible under law or in equity and includes any dispute, claim, controversy, or action between you and Epson arising out of or relating to this Agreement (including its formation, performance, or breach), the Software, Epson Hardware, the parties’ relationship with each other, and/or any other transaction involving you and Epson, whether in contract, or with respect to warranty, misrepresentation, fraud, tort, intentional tort, statute, regulation, ordinance, or any other legal or equitable basis. However, a “Dispute” does not include a claim or cause of action for (a) trademark infringement or dilution, (b) patent infringement, (c) copyright infringement or misuse, or (d) trade secret misappropriation (an “IP Claim”). You and Epson also agree, notwithstanding Section D, that a court, not an arbitrator, may decide if a claim or cause of action is for an IP Claim.
Initial Dispute Resolution: Before submitting a claim for arbitration in accordance with this Section D, you and Epson agree to try, for 60 days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the 60 days, you or Epson may commence an arbitration in accordance with Section D(6). Notice to Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3131 Katella Ave., Los Alamitos, CA 90720. Any notice of the Dispute shall include the sender’s name, address and contact information, the facts giving rise to the Dispute, and the relief requested. Any notice sent to you will be sent to the most recent address Epson has in its records for you. For this reason, it is important to notify us if your address changes by emailing us at [email protected] or writing us at the address above. You and Epson agree to act in good faith to resolve the Dispute before commencing arbitration in accordance with this Section D(2).
Binding Arbitration: If we do not reach an agreed upon solution within a period of 60 days from the time informal dispute resolution is pursued pursuant to Section D(2) above, then either party may initiate binding arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration according to this Agreement. ARBITRATION MEANS THAT YOU WAIVE YOUR RIGHT TO A JUDGE OR JURY IN A COURT PROCEEDING AND YOUR RIGHT TO DISCOVERY AND GROUNDS FOR APPEAL ARE MORE LIMITED THAN IN COURT. Pursuant to this Agreement, binding arbitration shall be administered by JAMS, a nationally recognized arbitration provider, pursuant to the JAMS Streamlined Arbitration Rules and Procedures or its applicable code of procedures then in effect for consumer related disputes, but excluding any rules that permit class arbitration (for more detail on procedure, see Section D(6) below). You and Epson understand and agree that (a) the Federal Arbitration Act (9 U.S.C. §§ 1 et seq.) governs the interpretation and enforcement of this Section D, (b) this Agreement memorializes a transaction in interstate commerce, and (c) this Section D shall survive termination of this Agreement.
Exception—Small Claims Court: Notwithstanding the parties’ agreement to resolve disputes through arbitration, you or we may bring an individual action in the small claims court of your state or municipality if the action is within that court’s jurisdiction and is pending only in that court.
WAIVER OF CLASS ACTION AND CLASS ARBITRATION: YOU AND EPSON AGREE THAT EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN AN INDIVIDUAL CAPACITY, AND NOT AS A CLASS ACTION OR CLASS ARBITRATION. If any court or arbitrator determines that the class action waiver set forth in this paragraph is void or unenforceable for any reason or that an arbitration can proceed on a class basis, then the arbitration provision set forth herein shall be deemed null and void in its entirety and the parties shall be deemed to have not agreed to arbitrate disputes.
Arbitration Procedure: If you or Epson commences arbitration, the arbitration shall be governed by the JAMS Streamlined Arbitration Rules and Procedures or the applicable rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration on a class-wide basis (the “JAMS Rules”), available at http://www.jamsadr.com or by calling 1-800-352-5267, and under the rules set forth in this Agreement. All Disputes shall be resolved by a single neutral arbitrator, which shall be selected in accordance with the JAMS Streamlined Arbitration Rules and Procedures, and both parties shall have a reasonable opportunity to participate in the selection of the arbitrator. The arbitrator is bound by the terms of this Agreement. The arbitrator, and not any federal, state, or local court or agency, shall have exclusive authority to resolve all disputes arising out of or relating to the interpretation, applicability, enforceability, or formation of this Agreement, including any claim that all or any part of this Agreement is void or voidable. Notwithstanding this broad delegation of authority to the arbitrator, a court may determine the limited question of whether a claim or cause of action is for an IP Claim, which is excluded from the definition of “Disputes” in Section D(1) above. The arbitrator shall be empowered to grant whatever relief would be available in a court under law or in equity. In some instances, the costs of arbitration can exceed the costs of litigation, and the right to discovery may be more limited in arbitration than in court. Each party will have the right to use legal counsel in connection with arbitration at its own expense. The arbitrator’s award is binding and may be entered as a judgment in any court of competent jurisdiction. You may choose to engage in arbitration hearings by telephone or, if you and we both agree, to conduct it online, in lieu of appearing live. Arbitration hearings not conducted by telephone or online shall take place in a location reasonably accessible from your
primary residence, or in Orange County, California, at your option.
a. Initiation of Arbitration Proceeding: If either you or Epson decides to arbitrate a Dispute, both parties agree to the following procedure:
i. Write a Demand for Arbitration: The demand must include a description of the Dispute and the amount of damages sought to be recovered. You can find a copy of a Demand for Arbitration at http://www.jamsadr.com (“Demand for Arbitration”).
ii. Send three (3) copies of the Demand for Arbitration, plus the appropriate filing fee, to: JAMS, 5 Park Plaza, Suite 400, Irvine, CA 92614, U.S.A.
iii. Send one (1) copy of the Demand for Arbitration to the other party (at the same address as the notice of a dispute, above in Section D(2)), or as otherwise agreed by the parties.
b. Hearing Format: During the arbitration, the amount of any settlement offer made shall not be disclosed to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled. The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during the arbitration.
30 Day Opt-out Right: You may elect to opt-out (exclude yourself) from the final, binding, individual arbitration procedure and waiver of class proceedings set forth in Section D of this Agreement by sending a written letter to the Epson address listed above in Section D(2) within 30 days of your assent to this Agreement that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding, individual arbitration procedure and waiver of class proceedings specified in this Section D. In the event that you opt-out consistent with the procedure set forth above, all other terms set forth in the Agreement shall continue to apply, including the requirement to provide notice prior to litigation. If you opt-out of these arbitration provisions, Epson will also not be bound by them.
Amendments to Section D: Notwithstanding any provision in this Agreement to the contrary, you and Epson agree that if Epson makes any future amendments to the dispute resolution procedure and class action waiver provisions (other than a change to Epson’s address) in this Agreement, Epson will obtain your affirmative assent to the applicable amendment. If you do not affirmatively assent to the applicable amendment, you are agreeing that you will arbitrate any Dispute between the parties in accordance with the language of this Section D (or resolve disputes as provided for in Section D(7), if you timely elected to opt-out when you first assented to this Agreement).
Severability: If any provision in this Section D is found to be unenforceable, that provision shall be severed with the remainder of this Agreement remaining in full force and effect. The foregoing shall not apply to the prohibition against class actions as provided in Section D(5). This means that if Section D(5) is found to be unenforceable, the entire Section D (but only Section D) shall be null and void.

E. DISCLAIMER OF WARRANTIES
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON- INFRINGEMENT. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED WARRANTIES LAST, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
F. EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY
IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR ANY LOST PROFITS, COST OF SUBSTITUTE EQUIPMENT, DOWNTIME, CLAIMS OF THIRD PARTIES, OR INJURY TO PROPERTY, RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY KIND IN EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT. SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
G. Other Provisions

Other Rights You May Have: This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Governing Law: Except for claims subject to arbitration pursuant to Section D, you and Epson agree that the law of the state or country where you reside shall govern.
Jurisdiction: Except for claims subject to arbitration pursuant to Section D, in the event of a dispute you and Epson both consent to the jurisdiction of the courts in your state of residence or, if you do not reside in a state, then of the courts in Orange County, California.

To find the Epson-authorized reseller nearest you, please visit www.epson.com in the United States or www.epson.ca in Canada.
To find the Epson authorized service center nearest you, please visit
www.epson.com/servicecenterlocator in the United States or
www.epson.ca/servicecenterlocator in Canada.
To contact the Epson ConnectionSM , call (800) 637-7661 or (562) 276-4394 in the United States and (905) 709-3839 in Canada.

EPSON is a registered trademark and the EPSON logo is a registered logomark of Seiko Epson Corporation.
PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc.
Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
Microsoft and Windows are trademarks of the Microsoft group of companies.
Miracast® is a registered trademark of Wi-Fi Alliance® .
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)

© 2023 Epson America, Inc., 4/23
CPD-63214
Printed in Taiwan