EPSON ELPFT01 Touch Unit User Guide
- June 1, 2024
- Epson
Table of Contents
EPSON ELPFT01 Touch Unit
Parts List
About This Guide
This guide explains how to handle the ELPFT01.
When you install the Touch Unit, you can draw and perform operations on the
projected screen using your fingers.
See the “Installation Guide” that you can access using the QR code on the
right for more details.
Using the Product Safely
Warning
Do not disassemble or remodel the Touch Unit.
The Touch Unit contains a high power laser product that could cause a fire,
electric shock, or an accident.
Do not connect the Touch Unit to an unsupported projector or to another
device.
The device could malfunction, or laser light that is higher than normal
intensity could be emitted.
Do not go near the Touch Unit if you are using medical equipment such as a
pace maker.
Furthermore, when using the Touch Unit, make sure there is no one using
medical equipment such as a pace maker, in the surrounding area. A powerful
magnet within the unit generates electromagnetic interference which may cause
medical equipment to malfunction.
Caution
Do not go near the Touch Unit with magnetic storage media such as magnetic
cards, or precision electronic devices such as computers, digital watches, or
mobile phones.
A powerful magnet within the unit could corrupt data or cause a malfunction.
The magnet on the back of the Touch Unit exerts a powerful magnetic attraction
on the installation surface. When installing, be careful not to trap your
fingers or any other part of your body between the magnets and the
installation surface.
Do not disassemble the Touch Unit when disposing of it. Dispose according to
your local or national laws and regulations.
WARNING: This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.)
| Item | Specification |
|---|---|
| Touch unit mass | Approx. 0.6 kg |
| Operating temperature | 0 to 40°C |
| Power (supplied from the projector) | 5 VDC 0.65 A |
Installation
Follow the steps below to install the Touch Unit ( A ). See the “Installation Guide” for detailed installation instructions and the initial configurations for touch operations.
- Attach the Touch Unit to the projection surface.
- Connect the Touch Unit and the projector with the cable.
- Press the [Menu] button on the projector to make settings in the [Installation] > [Touch Unit] menu.
Attached labels
The Touch Unit is a Class 1 laser product that conforms to the
IEC/EN60825-1:2014 standard.
There are warning labels affixed to the Touch Unit to indicate that it is a
Class 1 laser product ( B ).
The labels contain the following information.
- Class 1 laser product
- Warning: Do not open the case. The device contains a high power laser product.
- Warning:
- Caution: If this section is opened, class 3B invisible laser radiation will be emitted.
- Avoid exposure to the radiation beams.
Laser diffusion port
The laser beam is diffused from the laser diffusion ports ( E ) at the back of the Touch Unit.
- Light source output: Max.285 W
- Wavelength: 932 to 952 nm
Supplier’s DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Other Class B digital devices & peripherals
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way Long Beach, CA 90806
Tel: 562-981-3840
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.906. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: EPSON
Type of Product: FINGER TOUCH UNIT
Model: EAI destination: ELPFT01 Other destination: —
FCC Compliance Statement
For United States Users
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
WARNING
The connection of a non-shielded equipment interface cable to this equipment
will invalidate the FCC Certification or Declaration of this device and may
cause interference levels which exceed the limits established by the FCC for
this equipment.
It is the responsibility of the user to obtain and use a shielded equipment
interface cable with this device. If this equipment has more than one
interface connector, do not leave cables connected to unused interfaces.
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
Indication of the manufacturer and the importer in accordance with requirements of EU directive
CUSTOMERS SUPPORT
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
http://www.epson.com/
Importer: EPSON EUROPE B.V.
Address: Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam
Zuidoost
The Netherlands
Telephone: 31-20-314-5000
http://www.epson.eu/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>