RAIN HARVESTING HW1903 Sliding Gate Valves SS Paddle Instruction Manual
- June 12, 2024
- Rain Harvesting
Table of Contents
RAIN HARVESTING HW1903 Sliding Gate Valves SS Paddle
Product Information: Sliding Gate Valves SS Paddle
The Sliding Gate Valves SS Paddle is a versatile product that fits into 90mm/100mm pipes and allows for easy shut-off of water flow. It is suitable for use in both the USA and other countries.
- Product Code: HW1903, HW0903, HW0923
- Size: 3 (90mm) and 100mm
- Country: USA
- Website: rainharvesting.com
Product Usage Instructions: Sliding Gate Valves SS Paddle
- Select your desired installation point. The Sliding Gate Valve can be installed in either the vertical or horizontal position.
- Measure and remove a 35mm section of pipe at your desired installation point. Ensure all cut edges are clean and smooth.
- Use priming fluid to clean the inside sockets of the Sliding Gate Valve and the outside of the pipes that will be glued to the valve.
- Apply solvent weld glue to the inside sockets of the Sliding Gate Valve and then to the outside of the pipes. Bring them together and ensure that the pipes are fully inserted into the sockets of the valve. Hold for a minimum of 60 seconds or until secure.
Product Specifications: Sliding Gate Valves SS Paddle
| A| B| C| D| E
---|---|---|---|---|---
USA| HW1903| 3 SCH40 F| 5.09 mm| 4.37 mm| 14.17 mm
AU/Other Countries| HW0903 HW0923| 90 F 100 F| 91 mm| 111 mm| 360 mm
All dimensions are in mm unless otherwise stated.
Product Pressure Ratings: Sliding Gate Valves SS Paddle
Code/Size| Paddle Type| Max Pressure (kPa)| Mid Flow Pressure (kPa)| Max
Crossing Pressure (kPa)
---|---|---|---|---
HW1903 Size 3| Stainless Steel Plastic Paddle| 210 kPa| 60 kPa
HW0903 90mm| Stainless Steel Plastic Paddle| 210 kPa| 60 kPa
HW0923 100mm DWV| Stainless Steel Plastic Paddle| 210 kPa| 60 kPa
For more information or assistance, you can contact us at +61 7
3248 9600 or visit our website at
rainharvesting.com.
PRODUCT DETAILS
Versatile in its application, the Sliding Gate Valves SS Paddle fits into 90mm/100mm pipes and allows water flow to be shut off.
Installation
WHAT’S IN THE BOX?
Sliding Gate Valve
TOOLS/MATERIALS YOU MAY REQUIRE
- Marker Pen Tape Measure
- Saw
- Solvent weld glue
- Priming fluid
SLIDING GATE VALVES – SS PADDLE
- Select your desired installation point. The Sliding Gate Valve can be installed in the vertical or horizontal position.
- Measure and remove a 35mm section of pipe at your desired installation point. Ensure all cut edges are clean and smooth.
- Use priming fluid to clean inside the sockets of the Sliding Gate Valve and outside of the pipes you will be gluing the valve to.
- Apply solvent weld glue first to inside the sockets of the Sliding Gate Valve and then to the outside of the pipes, bring together and ensure pipes are inserted fully into the sockets of the Sliding Gate Valve. Hold for a minimum of 60 seconds or until secure.
Product Specifications
supported by RAIN HARVESTING.
- A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help.
- With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.
- The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at rainharvesting.com
References
- Cleaner Water. More of it. | Rain Harvesting by BMCo US
- Supported by Rain Harvesting | Blue Mountain Co - Rain Harvesting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>