SOLARIVER SRK20360 Solar Water Pump System User Guide
- June 5, 2024
- SOLARIVER
Table of Contents
SOLARIVER SRK20360 Solar Water Pump System
Quick Start Guide
Follow these steps to get your Solariver solar water pump moving.
First, submerge the pump in water
- The pump will not run if it is plugged in and then put underwater, it needs to be underwater first.
Next, connect the pump to the solar panel by matching up the flat sides of the two connectors
- The pump will not work if not connected correctly.
Place solar panel in full sun
- Works when cloudy, but not when shade is created by solid objects such as buildings, branches, leaves or shadows covering the panel.
Assemble extension tubes and select nozzle
- See instruction manual for further details for your project and application.
Our pumps are equipped with dry-run protection to protect the pump from burning out if it is not completely submerged. See the instruction manual for pond base placement recommendations to avoid blockage.
For questions or troubleshooting
please visit our website at solariverusa.com or reach out to us by phone or email:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>