godrej Biometric Spacetek Pro Digital Door Lock Owner’s Manual

godrej Biometric Spacetek Pro Digital Door Lock Owner’s Manual

FEATURES

OUTDOOR BODY
“Remote Control” s not a standard part of a package, it s optional, *The “Video Door Phone Module” i not standard part of a package, its opinion,

Default PIN

Default PIN is [1] [2] [3] [4] [‘].

Entering Registration Mode

1. Ensure the door is open.

2. Open the battery cover and fl al} press “Registration” button. feel

3. Enter master password and press [‘].

4. If there is no input after pressing ve [Registration] button for 8 seconds, – the process is cancelled.

5. When users input 13 digits or ~ more than that, the entered password s discarded (Range 4 L minimum maximum 12).

6. When user presses master password, entering [#] will cancel the process.

7. If there is no input and directly [‘] is pressed, the complete process will get cancelled.

**How to Register/Change the Master Password

**

1. Ensure the door is open.

2. Open the battery cover and press “Registration” button.

3. Enter master password and press [*].

4. Press [0].

5. Enter 4-12 digits for the password.

6. Press [].

7. If the password is not entered within 8 seconds, the registration will be cancelled.

Note:
a. Master password cannot be same as user password and one-time password.
b. If user tries to register already registered master password it will give a cancellation alarm.
¢. User can not set default pin as master password.

How to Register the User Password

1. Ensure the door is open.

   ---

2. Open the battery cover and press P “Registration” button.

3. Enter master password and press [].

4. Press [1].

5. Enter 4-12 digits for the password.

6. Press [].

7. If the password is not entered within 1se 8 seconds, the registration will be M cancelled

Note:
a. User password cannot be same as master password and one-time password.
b. If user tries to register already registered user password it will give a cancellation alarm.
c. User can not set default pin as user password
d. Maximum 4 user password can be added.

How to Register the One-Time Password

1. Ensure the door is open.

2. Open the battery cover and press “Registration” button.

3. Enter master password and press [*].

4. Press [4].

5. Enter 4-12 digits for the password,

6. Press [‘].

7. If the password is not entered within 8 seconds, the registration will be cancelled. When the new OTP is registered, the previously registered OTP will be deleted.

Note:
a. One-time password cannot be same as master password and user password.
b. One-time password will be deleted once the lock has been opened using it

How to Register the Finger Print

1. Ensure the door is open.

   ---

2. Open the battery cover and press “Registration” button.

3. Enter Master password and press .

4. Press[a].

5. Place your finger on the fingerprint =2~ reader and input your fingerprint three times |} ? for single registration. You will hear the beep |7 ¢ sound after successful reading of your – fingerprint each time for each number of fingerprint. After successful registration, it gives buzzer tune and displays registered finger print number.

6. Press [] button to complete.

7. To add more fingerprints, repeat step 5.

8. Upto 100 fingerprints can be registered.

Note:
a. During the process, in absence of no additional input for 8 seconds, the registration process is cancelled.
b. When you have already registered 100 fingerprints, you cannot register new ones. It will give memory full alarm. Please delete and try to register again.

How to Register Remote Control

1. Ensure the door is open.

   ---

2. Open the battery cover and press “Registration” button.

3. Enter master password and press [].

4. Press [2].

5. Press remote button.

6. The lock reads the key code. You will hear the beep sound after successful reading of the key code.

7. If no key code detected for 8 seconds, then registration sequence ends.

Note:
a. By repeating steps 5 and 6, you can register up to 5 remotes.
b. If user tries to register already registered remote it will give a cancellation alarm.
c. After registering 5 remote keys, it gives memory full buzzer alarm.
d. You can exit the process by pressing [‘] key.

How to Register Video Door Phone Module

1. Ensure the door is open.

   ---

2. Open the battery cover and press Registration” button.

3. Enter master password and press [*].

4. Press [5].

5. Press button on Video Door Phone Module.

6. The lock reads the Video Door Phone module key code. You will hear the beep sound after successful reading of key code.

7. If no Video Door Phone Module code detected for 8 seconds, then registration sequence ends.
   

Note:
a. You can register up to 5 video door phone modules.
b. If user tries to register already registered video door phone module it will give a cancellation buzzer beep.
c. After registering 5 video door phone modules, it gives memory full buzzer alarm.
d. You can exit the process by pressing [*] key.

Entering Deletion Mode

1. Ensure the door is open.

   ---

2. Open the battery cover and press “Registration” button for 3 seconds.

3. Enter master password

4. Press[].

5. If there i no input for 8 seconds after pressing Registration] button, the process is cancelled.

6. If the input more than 13 digits, the process is cancelled.

7. After entering master passwords, pressing [#] will cancel the process.

8. If there is no input and directly [ is pressed, the complete process will get cancelled.

Note:
It wrong password is entered, you will hear a beep sound of cancellation. Once the keypad lights go off, repeat the steps 1 to 4.

How to Delete User Passwords

1. Enter deletion mode.

2.  Press [1].

3. Press [‘] for 3 seconds.

4. If there is no input for 8 seconds, the process is canceled.

5. If [*] key is not pressed for 3 seconds, it gives cancellation alarm and process is cancelled.

6. All the registered user passwords will be deleted.

How to Delete One Time Password

1. Enter deletion mode.

2. Press [4].

3. Press [*] for 3 seconds.

4. If there is no input for 8 seconds, the process is canceled.

5. If[“] key is not pressed for 3 seconds, it gives cancellation alarm and process is cancelled.

6. One time password will be deleted.

How to Delete Finger Prints

1. Enter deletion mode.

2. Press [3].

3. Press [*] for 3 seconds.

4. If there is no input for 8 seconds, |~ the process s canceled

5. If [“] key is not pressed for 3 seconds, it gives cancellation alarm and process is cancelled.

6. All the registered finger prints will be deleted.

How to Delete Remote Control

1. Enter deletion mode.

2. Press [2].

3. Press [*] for 3 seconds.

4. If there is no input for 8 seconds, the process is canceled.

5. It “] key is not pressed for 3 seconds, it gives cancellation alarm and process is cancelled.

6.  All the registered remote keys will be deleted.

How to Delete Video Door Phone Modules

1. Enter deletion mode.

2. Press [5].

3. Press [‘] for 3 seconds.

4. If there is no input for 8 seconds, the process is cancelled.

5. If [*] key is not pressed for 3 seconds, it gives cancellation alarm and process is cancelled.

6. All the registered Video door phone modules will be deleted.

Opening Door from Outside (With Password)

1. Touch the keypad and then enter the as e password. Password can be master 1o password, registered user password or . registered One time password.

   ---

2. After entering correct password, a buzzer beep is heard. When latch is unlocked, it gives “Unlock buzzer tune” and ‘For incorrect password, it gives *Error buzzer tune” and displays error code on keypad.

3. The password needs to be entered while the light on the keypad is on and if the keypad s unlit, touch the keypad.

4. A correct password needs to be entered to open the door.

Opening from Outside (Random Number Function or Scramble Digits)

1. Touch the keypad and then enter any numbers before entering the registered password.
2. Press[‘].

OR

1. Touch the keypad and after entering | 7 a registered password, enter any number.
2. Press[].

OR

1. Touch the keypad and then enter any numbers before entering the registered password and enter any number after registered password.
2. Press[]

OR

1. After entering correct password, a buzzer beep is heard. When latch is unlocked, it gives “Unlock buzzer tune” and ‘For incorrect password, it gives “Error buzzer tune” and displays error code on keypad.
2. When more than 20 digits including both the password and the random numbers are entered, a cancellation buzzer alarm will sound, and the numbers will have to be entered again.
3. Touch the keypad only if number plate is not it

Opening from Outside (with Fingerprints)

1. Touch the keypad.
2. Place the finger on the finger print sensor.
3. After detecting a correct finger print, the latch is unlocked, it gives “Unlock buzzer tune™ and ‘For unregistered fingerprint, it gives “Error buzzer tune” and displays error code on keypad.
4. If it is a unregistered finger print, it will give a cancellation buzzer alarm and will not open the door.
5. Touch the keypad only if keypad is not lighted.
   

Locking from Outside
When the door gets closed, the door will lock automatically.

Opening from Inside

The door will open when the handle is pushed downwards.

Locking from Inside

When the door gets closed, the door will lock automatically.

Volume Control

1. To Increase

2. Touch the keypad.

3. Enter master password.

4. Press [#].

5. Press [3].

6.  To Decrease

7. Touch the keypad.

8. Enter password.

9. Press [#].

10. Press [6].

Note:
a. Volume can be adjusted to 5 levels.
b. The volume can be adjusted when the door is locked.
c. Touch the keypad only if keypad is not lighted.

Temporary Mute Function

1. Touch the keypad.
2. Press [#].
3. Enter the password,
4. When the temporary mute function is activated, the keypad will flicker with each touch.
5. Touch the keypad only if number plate is not it.

Emergency Key

Mechanical key can be used when the door lock is malfunctioning and doesn’t unlock after entering the correct password or placing the fingerprint.

Deadbolt Alarm
If during locking or unlocking, deadbolt does not operate properly, it gives deadbolt error tune and displays error code on the keypad. For deabolt error during unlocking, it retries for 3 times and for deadbolt error during locking, it keeps on retrying until door gets locked properly. During Deadbolt error the ‘Error Alarm LED’ on inner fascia and outer fascia are blinked.

 Alarm
 Beep

Low Battery Alarm

1. During low battery, it blinks low battery LED on indoor and outdoor fascia continuously whenever it is waked up and also whenever door is opened. It gives battery low buzzer tune after door unlock buzzer tune and door lock buzzer tune.
2. When the alarm sounds while the door lock operates normally, the batteries need to be replaced.
3. When flat batteries are not replaced, after defined door operations, the door will unlock but will not get locked and will stop functioning there after. In this condition, if user tries to unlock the door using registered password or fingerprint, it will give error alarm and will display error code.
4. This condition continues untill user replaces all the batteries.

 Low Battery
 Beep

Use of the Emergency Power Source

1. Connect the mobile power bank through the USB connector provided at the bottom of the Outer fascia.
2. User can unlock the door using password entry or finger print entry.
   

Break-in Alarm/Anti-Theft Alarm

1. If the door lock senses any signs of abnormal attempts to open the door while it s locked, it wil give a anti-theft alarm continuously.
   Follow the steps below to deactivate the alarm:

2. Remove the batteries. S R

3. Fix the condition due to which =k Anti-Theft alarm occurred.

4. Again place the batteries.

5. Touch the keypad.

6. Enter Master Password or User 123 Password or press Factory reset switch.

7. Press [‘].

Note: Possible instances for anti-theft alarm.

1. Magnet is not sensed when door is locked.
2. Magnet is not sensed when deadbolts are stuck inbetween(Neither locked nor unlocked).
3. Outer fascia is not properly fitted.

Prank Prevention Alarm and 1 Minute 30 Seconds Suspension
When unregistered password o finger print is entered 5 times consecutively, it will give a prank prevention alarm for 1 minute the door will not function for 1minute 30 seconds. After 1 minute and 30 seconds lock will start functioning normally. During Prank error, it will also blink the error LED on inside and outside fascia.

Privacy Mode

1. Ensure door is locked

2. Remove battery cover and (2! press the “Privacy” button for 3 seconds.

3. It will give a buzzer tune and will enter Privacy mode.

4. During privacy mode, if user outside tries to access the keypad to unlock the door, it will blink the privacy mode LED on outer fascia and will display the error code.

5. Privacy mode can be exited only by unlocking the door using mechanical key or though inside handle.

6. After exiting the privacy mode, it will give a buzzer tune for confirmation

**Passage Mode

**

1. Ensure door is open.
2. Remove battery cover and switch on the “Passage” mode button.
3. It will give a buzzer tune and wil enter Passage mode.
4. During passage mode user has no access to keypad or fingerprint sensor. If user tries to access the keypad, it will give error alarm and will display error code on the keypad. Also lock-unlock operation wil not be executed. The passage mode LED on the inner fascia will blink after every 30 minutes.
5. To exit the passage mode, user should switch off the passage mode button.
6. After exiting the passage mode, it will give a buzzer tune for confirmation.

**Factory Reset Operation

**

1. Ensure door is open.
2. Press factory reset button on the inner fascia by inserting a pin (As shown in picture).
3. Enter the factory Reset code.
4. Press [‘].
5. It will delete all the registered passwords, finger prints, remote keys and video door phone modules. It will also exit the privacy mode, passage mode.

Note:
Contact Service technician to get Factory Reset Code.

**Refresh Button Operation

**

1. User can press the refresh button at the bottom of the outer fascia in case of Functionality the lock.
2. Refresh button will not have effect in case of anti-the alarm, prank prevention alarm, privacy mode and passage mode.

Safe Disposal of E-Waste & Proper Usage of the Product
Disposal of waste Electrical and Electronic Equipment:

Note:
Please note that the product and is electronic accessories (e.g. PCB, batteries and motor) should ot be disposed of with other household waste at the end of their working lfe. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these tens from other types of waste and recycle them responsibly to promote the Sustainable reuses of material resources. This product and ts electronic accessories should not be mixed with other commercial wastes for disposal.

Godrej & Boyce Mfg. Co. Ltd.
Locking Solutions and Systems Division,
Plant 18, Pirojshanagar, Vikhroli,
Mumbai – 400079, India.
Website : www.godrejlocks.com
Consumer Care Cell :
St. Executive –
Godrej & Boyce Mig. Co. Ltd,
Plant 18, Pirojshanagar, Vikhroli,
Mumbai – 400079, India.
Tel : (office) 022-67964890
E-mail : locksmkt@godrej.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>