Godrej 13Z SI STSL Dishwasher Machine Instruction Manual
- June 5, 2024
- Godrej
Table of Contents
- Godrej 13Z SI STSL Dishwasher Machine
- SAFETY INSTRUCTIONS
- INSTALLATION
- TECHNICAL SPECIFICATIONS
- Technical Specifications
- BEFORE USING THE APPLIANCE
- LOADING YOUR DISHWASHER
- THE CONTROL PANEL
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- AUTOMATIC FAULT WARNINGS AND WHAT TO DO
- PRACTICAL INFORMATION
- PRODUCT SPECIFICATIONS
- BRANCH ADDRESSES / SERVICE CONNECT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Godrej 13Z SI STSL Dishwasher Machine
Icon | Type | Meaning |
---|---|---|
WARNING | Serious injury or death risk | |
RISK OF ELECTRIC SHOCK | Dangerous voltage risk | |
FIRE | Fire risk | |
CAUTION | Injury or property damage risk | |
IMPORTANT NOTE | Operating the system correctly |
SAFETY INSTRUCTIONS
General Safety Warning
Please check the packaging of your machine before installation and the
outer surface of the machine once the packaging has been removed. Do not
operate the machine if it appear damaged or if the packaging has been opened.
Packaging materials protect your machine from any damage that might occur
during transportation. The packaging materials are environment friendly as
they are recyclable. Use of recycled material reduces raw material consumption
and decreases waste production.
Installation Warning
- Choose a suitable and safe place to install your machine.
- Do not install the appliance in a damp and dusty place.
- Do not install or store the appliance in any outdoor area or any area that is subjected to weathering conditions such as direct sunlight, wind or rain or temperatures below freezing.
- Only original spare parts should be used with the machine.
- Unplug the machine before installation.
- Your machine must only be installed by an authorized service agent.
- Installation by anyone other than an authorized agent may cause your warranty to be void.
- Check that the indoor electrical fuse system is connected in line with safety regulations.
- All electrical connections must match the values on the plate.
- Ensure the machine does not stand on the electrical supply cable.
- This appliance can be used by children aged from 8 years and above, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand hazards involved.
- Children should not be allowed to play with the appliance.
- Remove packaging and keep it out of reach of children.
- Keep children away from detergents and rinse aids.
- There may be some residue left in the machine after washing.
- Keep children away from the machine when it is open.
- Never use an extension cord or a multiple socket connection.
- The plug should be accessible after the machine is installed.
- After installation, run your machine unloaded for the first time.
- The machine must not be plugged in during positioning.
- Always use the coated plug supplied with your machine.
- If the electrical cable is damaged, it should only be replaced by a qualified electrician.
During Usage
This machine is for domestic use only; do not use it for other purposes.
Commercial use will void the guarantee. Do not stand, sit or place loads on
the open door of the dishwasher. Only use detergents and rinse aids produced
specifically for dishwashers. Our company is not responsible for any damage
that may occur due to misuse. Do not drink water from the machine. Due to the
danger of explosion, do not place any chemical dissolving agents into the
machine’s washing section. Check the heat-resistance of plastic items before
washing them in the machine. Only put items in the machine which are suitable
for dishwashing, and take care not to overfill the baskets.
Do not open the door while the machine is in operation, hot water may spill
out. Safety devices ensure the machine stops if the door is opened. The
machine door should not be left open. It may cause accidents. Place knives and
other sharp objects in the cutlery basket in a blade-down position. For models
with the automatic door- opening system, when the Energy Save option is
active, the door will open at the end of a program. To prevent damage to your
dishwasher, do not attempt to close the door for one minute after it has
opened. For effective drying, keep the door open for 30 minutes after a
programme has ended. Do not stand in front of the door after the auto-open
signal sounds. In the case of a malfunction, repair should only be performed
by Godrej authorized service provider, otherwise the warranty will be void.
Before repair work, the machine should be disconnected from the mains. Do not
pull the cable to unplug the machine. Switch off the water tap. Operation at a
low voltage will cause a decline in performance levels. For safety, disconnect
the plug once a program has finished. To avoid an electric shock, do not
unplug the machine with wet hands. Pull the plug to disconnect the machine
from the mains, never pull on the cord.
RECYCLING
- Some machine components and packaging consist of recyclable materials.
- Plastics are marked with international abbreviations:>PE<, >PP<, etc.
- The cardboard parts consist of recycled paper. They can be put into waste paper containers for recycling.
- Material unsuitable for domestic waste must be disposed off at recycling centres.
- Contact a relevant recycling centre to obtain information about disposal of different materials.
PACKING AND THE ENVIRONMENT
Packaging materials protect your machine from damage that may occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and therefore decreases waste production.
CE Declaration of Conformity
We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Producer company has its right to amend design and technical specifications reserved.
Conformity with the standards and Test data / EC Declaration of
Conformity
All stages related to the machine are executed in accordance with the safety rules provided in all relevant directives of the European Community. 2004/108/EC/, 2006/95/EC, IEC 436/DIN 44990, EN 50242.
INSTALLATION
Machine positioning
When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C. Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position. Do not hold the machine by its door or panel. Leave an adequate distance around the machine to allow ease of movement when cleaning. Ensure the water inlet and outlet hoses are not squeezed or trapped and that the machine does not stand on the electrical cable while positioning. Adjust the feet so the machine is level and balanced. The machine should be placed on flat ground otherwise it will be unstable and the door of the machine will not close properly. Do not place the machine in open area where water splashing is prevalent .
Water connection
We recommend fitting a filter to your water inlet supply in order to prevent damage to your machine due to contamination sand, rust, etc from indoor plumbing. This will also help prevent yellowish deposit formation after washing.
Water inlet hose
WARNING
Use the new water inlet hose supplied with your machine, do not use an old
machine’s hose. Run water through the new hose before connecting. Connect the
hose directly to the water inlet tap. The pressure supplied by the tap should
be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1
MPa, a pressure relief valve must be fitted between the connection. After the
connections are made, turn the tap on fully and check for water leaks. Always
turn off the water inlet tap after a wash program has finished.
How to Attach the Magic Hose Joint
- Loosen the four screws and slide the top of the Magic Hose Joint onto the faucet.
- Then, securely tighten the four screws provided with the Magic Hose Joint using a screwdriver to secure the top of the joint to the faucet.
- Remove the CAUTION label from the Magic Hose Joint.
- Turn the male couple on the joint clockwise to attach it securely to the top of the joint.
- The appliance is to be connected to the water mains using new water supply Hose and Magic Hose Joint.
- Old hose sets should be reused.
CAUTION
If outer diameter of faucet is larger than calbre of the Joint Ring, loosen
the four screws and remove the Joint Ring from the MagicHose Joint.
Connecting the Water Supply Hose to the MagicHose Joint
- While pushing the sleeve on the female coupler of the joint down with your fingers, connect the female coupler to the male coupler.
- Release the sleeve, then push the Water Supply Hose up into the Magic Hose Joint until it clicks into place.
- Pull the Water Supply Hose down to make sure that it is securely attached.
An Aqua stop water spout is available with some models. Do not damage it or allow it to become bent or twisted.
Drain Hose
Connect water drain hose directly to water drain hole or to the sink outlet spigot. This connection should be minimum 50 cm and maximum 110 cm from floor plane.
IMPORTANT
Items will not wash properly if a drain hose longer than 4m is used.
Electrical connection
WARNING
Your machine is set to operate at 220-240 V. The earthed plug of the machine
must be connected to an earthed outlet supplied by suitable voltage and
current.
In the absence of earthing installation, an authorised electrician should
carry out an earthing installation. In the case of use without earthing
installed, we will not be responsible for any loss of use that may occur. The
indoor fuse current value should be 10-16 A.
Fitting the machine undercounter
| A| B
---|---|---
All Products| B1| B2
Products Height (±2 mm)|
820 mm
|
830 mm
|
835 mm
If you wish to fit your machine undercounter, there must be sufficient space to do so and the wiring-plumbing must be suitable to do so (1). If the space under the countertop is suitable for fitting your machine, remove the worktop as shown in the illustration.
WARNING
The countertop, of which the machine will be placed under, must be stable in
order to prevent imbalance. The top panel of the dishwasher must be removed to
fit the machine under the countertop. To remove the top panel, remove the
screws that hold it on, located at the rear of the machine. Then, push the
panel 1 cm from the front towards the rear and lift it. Adjust the machine
feet according to the slope of the floor. Fit your machine by pushing it under
the counter taking care not to crush or bend the hoses .
After removing the top panel of your dishwasher, the machine should be placed
in a space of the dimensions.
- A: If there is no felt on the top of the product; you should take into account this product’s height.
- B1: If there is felt on the top of the product with 2nd basket; you should take into account this product’s height.
- B2: If there is felt on the top of the product with 3rd basket; you should take into account this product’s height.
TECHNICAL SPECIFICATIONS
General appearance
- Worktop
- Upper basket with racks
- Upper spray arm
- Lower basket
- Lower spray arm
- Filters
- Rating plate
- Control panel
- Detergent and rinse-aid dispenser
- Cutlery basket
- Salt dispenser
- Upper basket track latch
- Turbo Drying Unit: This system provides better drying performance for your dishes.
Technical Specifications
Capacity | 13 place settings |
---|---|
Height | 850 mm |
Height (Without worktop) | 820 mm |
Width | 598 mm |
Depth | 598 mm |
Net Weight | 53 kg |
Electricity input | 220-240V, 50 Hz |
Total power | 1900 W |
Heating power | 1800 W |
Pump power | 100 W |
Drain pump power | 30 W |
Water supply pressure | 0.03 MPa (0.3 bar) 1 MPa (10 bar) |
Current | 10A |
BEFORE USING THE APPLIANCE
Preparing your Dishwasher for first use
Check whether the electricity and supply water specifications match the values
indicated in the installation instructions for the machine Remove all
packaging materials inside
the machine. Set the water softener level. Fill the rinse aid compartment.
Fill the salt (IF AVAILABLE)
To fill with softener salt, open the salt compartment cap by turning it counter clockwise. At first use, fill the compartment with 1 kg salt and water (3) until it is almost overflowing. If available, using the funnel (4) provided will make filling easier. Replace the cap and close it. After every 20th-30th wash, add salt into your machine until it fills up (approx. 1 kg). Use softener salt specifically produced for use in dishwashers. When you start your dishwasher, the salt compartment is filled with water, thereforeput the softener salt in prior to starting your machine. If the softener salt has overflowed and you do not start the machine immediately, run a short washing program to protect your machine against corrosion.
Test Strip
NOTE
The level is set to 3 as default. If the water is well water or has a hardness
level above 90 dF, we recommend that you use filter and refinement devices.
Water Hardness Table
Level| German dH| French dF| British dE|
Indicator
---|---|---|---|---
1| 0-5| 0-9| 0-6| L1 is seen on the display
2| 6-11| 10-20| 7-14| L1 is seen on the display
3| 12-17| 21-30| 15-21| L3 is seen on the display
4| 18-22| 31-40| 22-28| L4 is seen on the display
5| 23-31| 41-55| 29-39| L5 is seen on the display
6| 32-50| 56-90| 40-63| L6 is seen on the display
Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To find out the hardness level of your tap water, contact your water company or use the test strip (if available).
Setting
Press program button when the machine is off position. Turn on the machine by pressing On/Off button and continue to press program button at least for 3 seconds. If Hardness set is recognized SL is shown for 2 seconds. Release program button. The last setting level is viewed. Press program button to set the desired level.At any pressure of program button hardness level is incremented. Hardness level 1 returns after hardness level 6. The last selected water hardness level is stored in the memory by turning the machine off with On/Off button
Detergent usage
Only use detergents specifically designed for domestic dishwashers. Add the recommended amount of detergent for the selected programme to ensure the best performance. Keep your detergents in cool, dry places out of reach of children.
Filling the detergent
Push the latch to open the dispenser and pour in the detergent. Close the lid and press it until it locks in place. The dispenser should be refilled just before the start of each programme. If the dishes are heavily soiled, place additional detergent in the prenwash detergent chamber
Using combined detergents
These products should be used according to the manufacturers instructions. Never put combined detergents into the interior section or the cutlery basket. Combined detergents contain not only the detergent but also rinse-aid, salt replacement substances and additional combination. We recommend you do not use combined detergent sinshort programmes. Please use powder detergents in such programmes. If you encounter problems when using combined detergents, please contact the detergent manufacturer. When you stop using combined detergents, make sure that water hardness and rinse aid settings are set to correct level
Rinse aid usage
Rinse-aid makes dishes sparkle and helps them to dry without spotting. Rinse
aid is required for stain-free utensils and clear glasses. Use only rinse-aid
for domestic
dishwashers.
Filling the rinse aid and setting
To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill
the compartment with rinse aid to the MAX level and then close the cap. Be
careful not to overfill the rinse aid compartment and wipe up any spills. In
order to change the rinse aid level, follow the below steps before turning on
the machine. Push the programme button and hold it down. Turn on the machine.
Hold down the programme button until the LEDs flash twice. Rinse aid set
follows water hardness set. The machine will display the current setting.
Change level by pushing the programme button. Switch off the machine to save
the setting. The factory setting .If the dishes are not drying properly or are
spotted, increase the level. If blue stains form on your dishes, decrease the
level
Level | Brightener Dose | Indicator |
---|---|---|
1 | Rinse-aid not dispensed | r1 is shown on the display. |
2 | 1 dose is dispensed | r2 is shown on the display. |
3 | 2 doses are dispensed | r3 is shown on the display. |
4 | 3 doses are dispensed | r4 is shown on the display. |
5 | 4 doses are dispensed | r5 is shown on the display. |
Warning
Use only those rinse aid materials which are allowed for use in the machine.
As rinse aid residues left as a result of overflowing will create extremely
high amounts of foam and thus reduce the washing performance, remove the
excess amount of rinse aid by wiping it with a rag.
LOADING YOUR DISHWASHER
For best results, follow these loading guidelines.
- We recommend that you place large items (pots, pans, lids, plates and bowls) which are heavily soiled in the lower basket.
- The upper basket is designed for delicate and lighter dishware such as glasses, coffee and tea cups and saucers.
- Position the dishes so that they will not get moved by the spray of water.
- Cutlery should be placed in the cutlery basket. Items should be loaded individually into the appropriate slots with their handles downwards. Long utensils should be placed horizontally on the baskets.
WARNING
Take care not to obstruct the rotation of spray arms.
Recommendations
Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with full load.
NOTE
Do not overload the drawers or place dishes in the wrong basket. Always place
sharp utensils with the sharp point down and open utensils with their openings
down.
Upper Basket Height adjustment
Turn the Rail Stop Clips, at the ends of the rails, to the sides to open them then pull out and remove the basket. Change the position of the wheels, then reinstall the basket to the rail, making sure to close the Rail Stop Clips. When the upper basket is in the higher position, large items such as pans can be placed on the lower basket.
Height Adjustable Rack
The height adjustable racks enable glasses and cups to be placed on or under the racks. The racks can be adjusted to 2 different heights. Cutlery and utensils can also be placed on the racks horizontally.
Alternative basket loads Lower basket
Upper basket
Incorrect loads
Unsuitable items for dishwashing
- Cutlery and utensils made of wood.
- Delicate decorative glasses, craft and antique utensils.
- These utensils are not dishwasher proof.
- Plastic parts not resistant to heat.
- Copper and tin utensils.
- Utensils which are soiled with ash, wax, lubricating grease or ink.
- Aluminium and silver parts have a tendency to discolour and fade during during the wash cycle. Some types of glass e.g. crystal glass objects may turn cloudly after many wash cycles.
Glass and utensil damage Causes
- Glass type and glass production process.
- Chemical composition of the detergent.
- Water temperature of the wash programme.
Recommendation
Use only glasses and porcelain which the manufacturer designates as dishwasher proof. Use a detergent which protects utensils. Take glass and cutlery out of the dishwasher as soon as possible after the programme ends.
Unloading the dishwasher
To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up. Tip: Hot utensils are sensitive to shock!Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled. When the programme ends, water droplets can still be seen inside the appliance. This does not affect the drying of the utensils.
PROGRAMME TABLE
Programme| Prewash| Jetwash 14| Quick 30 40°C| Eco (Reference)| Super 50 65°C|
Dual ProWash 60°C| Hygiene 70°C| Smart 60°C-70°C| Steam Wash
---|---|---|---|---|---|---|---|---|---
Duration (min)| 15| 14| 30| 239| 50| 113| 123| 109-179| 161
Description| To rinse dishes that you plan to wash later.| Fastest programme
for lightly soiled and recently used dishes.
Suitable for 4 place settings.| For lightly soiled dishes and a quick wash.|
Standard programme for normally soiled, daily used dishes.| For normally
soiled daily-used dishes with a faster programme.| For both lightly soiled
delicate glassware and heavily soiled crockery at the same time.| High-
temperature, disinfecting programme for heavily soiled dishes.| Auto programme
for heavily soiled dishes.| For heavily soiled dishes with effective cleaning
by steam.
NOTE
THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF DISHES, THE WATER
TEMPERATURE, THE AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
- Only use powder detergent for short programmes.
- Short programmes do not include drying.
- To assist drying, we recommend slightly opening the door after a cycle is complete.
THE CONTROL PANEL
Pressing the On/Off button (4) will switch the machine on and off. The LED light remains lit as long as the machine is on. Select a suitable programme by pressing the programme button (5). Press start/pause button (6) to start the programme. The wash LED light turns on and the remaining time indicator (7) shows the time remaining for that specific programme. If you open the door of the machine whilst a programme is running, the programme will pause. During this pause the programme number and duration are shown alternately. Programme progression can be monitored by the LED indicators (7). These highlight whether the programme is in the wash, rinse or dry stage. The machine will be silent for approximately 40-50 minutes during the drying stage. By pressing the half load button (3), three different options can be selected: Upper Basket, Lower Basket and both Baskets. Repeatedly press the half load button until the LED indicator shows the mode required – the LED shows which area of the machine will be washed Pressing and holding down the Half Load button (3) for three seconds activates the ‘Tablet Option’. Use this specific option when using combined detergents that contain salt and rinse aid. To enable the door of the machine to open automatically at the end of the programme, select Energy Save option 8 by pressing Extra button (1) until its led turns on. This function increases drying efficiency and saves energy by operating at a lower temperature. To reduce the duration of the washing, select Extra Fast option (8) by pressing Extra button (1) until its led turns on. This option washes the dishes with more pressure and provides more economical water usage. When Extra Silent option (8) is activated by pressing Extra button (1) until its led turns on, the dishes are washed with less pressure, thus provides more sensitive and silent washing. If you have used any of the extra features, these will remain active on the next washing programme. To turn these features off or change the configuration, press the relevant button until Child lock can be turned on by pressing and holding the Extra1 and ‘Half Load (3) buttons for three seconds. When Child lock has been activated all LED lights flash on the machine and CL is shown on the remaining time indicator (7). To deactivate the setting repeat the above instructions, all LED lights and CL flash twice and then remain off. You can delay the start of any programme from one hour up to 19 hours, in one hour intervals. To activate this feature, press the Delay Button (2) before starting a selected programme. Press the button until you have reach the required delay in hours, press ‘Start/Pause Button (6). The programme will now start after the delay time has elapsed. To cancel a delay, press the Delay Button (2) until zero appears on screen. If user switches the machine to off position after selecting the delay time and the programme has started, delayed time is cancelled. When the dishwasher salt needs to be refilled, the ‘Salt Warning Indicator (9) will turn on. This indicator will remain active until the salt has been refilled. When the rinse aid needs to be refilled, the ‘Rinse Aid Indicator’ (9) will turn on. This indicator will remain active until the rinse aid has been refilled.
Changing a programme
When you want to change the wash programme after another programme has already started
Cancelling a programme
When you want to cancel and stop a wash programme after another programme has already started:
Switching the Machine Off
NOTE: Do not open the door before the programme ends. At the end of the washing programme, you can leave the door of your machine ajar to hasten the drying. If the door of machine is opened or power is cut off during washing, the programme will continue when the door is closed or the power is restored.
Buzzer Sound Control
To change the buzzer sound level, follow the below steps
- Turn on the machine and press Delay (2) button for 3 seconds.
- When sound setting is recognized, buzzer gives a long sound and machine will display last set level, “S0” or “S1”.
- To turn off buzzer sound, press Program button (5). To turn on buzzer sound, press Start/Pause’ button (6).
- To save the selected sound level, turn off the machine. ’’S0’’ level means all voices are off. Factory setting is “S1”.
Save Power Mode
To activate or deactivate save power mode, follow the below steps
- Turn on the machine and press Extra 1 and Delay 2 buttons simultaneously for 3 seconds.
- After 3 seconds, the machine will display last Setting, IL1 or IL0.
- When Save Power Mode is activated IL1 will be displayed. On this mode interior lights will turn off 4 minutes after th door is opened, and the machine will turn off after 15 minutes of no activity in order to save energy.
- When Save Power Mode is deactivated IL0” will be displayed. If Save Power Mode is deactive, interior lights will be on as long as the door is open, and the machine will always be on unless it is turned off by user.
- To save the selected setting, turn off the machine. In factory setting, Save Power Mode is active.
CLEANING AND MAINTENANCE
Cleaning your Dishwasher is important to maintain the machine’s service life. Oil and lime may build up in your Dishwasher over time. If this occurs Fill the detergent compartment but do not load any dishes. Select a programme which runs at high temperature and run the Dishwasher empty. If this does not clean your Dishwasher sufficiently, use a cleaning agent designed for use with dishwashers.
Cleaning machine and filters
Clean the filters and spray arms at least once a week. If any food waste remains on the coarse and fine filters, remove them and clean them thoroughly with water.
- a) Micro Filter
- b) Coarse Filter
- c) Metal Filter
To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it upwards
- Pull the coarse filter out of the micro filter.
- Then pull and remove the metal filter.
- Rinse the filter with water until it is free of residue.
- Reassemble the filters.
- Replace the filter insert, and rotate it clockwise .
- Never use your Dishwasher without a filter.
- Incorrect fitting of the filter will reduce the washing effectiveness.
- Clean filters are necessary for proper running of the machine.
Spray arms
Make sure that the spray holes are not clogged and that no food waste is stuck to the spray arms. If there is any clogging, remove the spray arms and clean them under water. To remove the upper spray arm undo the nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the nut is properly tightened when refitting the upper spray arm.
Notes
Only clean the appliance with special detergents/appliance cleaners which
are suitable for use with dishwashers. Regularly wipe the door seals using a
damp cloth and a little washing liquid. This will keep the door seal clean and
hygienic. Leave the door open slightly if the appliance will not be used for a
while. This will prevent an unpleasant odour from developing. Never clean the
dishwasher using a steam cleaner. The manufacturer is not liable for any
consequential damage. Wipe the front of the dishwasher and the control panel
regularly using a damp cloth and a little washing liquid. Do not use sponges
with a rough surface or abrasive detergents. These could scratch the surface
alignment. For dishwashers with a stainless steel front, avoid using sponge
cloth, or rinse these thoroughly several times before using them for the first
time. This will prevent corrosion.
WARNING
Health Hazard due to detergents containing chlorine. Always use chlorine –
free detergents..
TROUBLESHOOTING
FAULT | POSSIBLE CAUSE | TROUBLESHOOTING |
---|
The programme does not start.
| Your Dishwasher is not plugged in.| Plug your Dishwasher in.
Your Dishwasher is not switched on.
| Switch your Dishwasher on by pressing the On/Off button.
Fuse blown.| Check your indoor fuses.
Water inlet tap is closed.| Turn on the water inlet tap.
Your Dishwasher door is open.| Close the Dishwasher door.
Water inlet hose and machine filters are clogged.
| Check the water inlet hose and machine filters and make sure they are not clogged.
Water remains inside the machine.
| Water drain hose is clogged or twisted.| Check the drain hose, then either
clean or untwist it.
The filters are clogged.| Clean the filters.
The programme is not finished yet.| Wait until the programme is finished.
Machine stops during washing.
| Power failure.| Check mains power.
Water inlet failure.| Check water tap.
Shaking and hitting noises are heard during a wash operation.
|
The spray arm is hitting the dishes in the lower basket.
|
Move or remove items blocking the spray arm.
Partial food wastes remain on the dishes.
|
Dishes placed incorrectly, sprayed water not reaching affected dishes.
|
Do not overload baskets.
Dishes leaning each another.
| Place dishes as instructed in the section on loading your dishwasher.
Not enough detergent used.
| Use the correct amount of detergent, as instructed in the programme table.
Wrong wash programme selected.
| Use the information in the programme table to select the most appropriate programme.
Spray arms clogged with food waste.
| Clean the holes in the spray arms with thin objects.
Filters or water drain pump clogged or filter misplaced.| Check if the drain
hose and filters are correctly fitted.
FAULT
|
POSSIBLE CAUSE
|
TROUBLESHOOTING
---|---|---
Whitish stains remain on dishes.
|
Not enough detergent used.
| Use the correct amount of detergent, as instructed in the programme table.
Rinse aid dosage and/or water softener setting set too low.|
Increase rinse aid and/or water softener level.
High water hardness level.| Increase water softener level and add salt.
Salt compartment cap not closed properly.| Check that the salt compartment cap
is closed properly.
Dishes do not dry.
| Drying option is not selected.| Select a programme with a drying option.
Rinse aid dosage set too low.| Increase rinse aid dosage setting.
Rust stains form on the dishes.
| Stainless-steel quality of the dishes is insufficient.|
Use only dishwasher proof sets.
High level of salt in wash water.
| Adjust the water hardness level using water hardness table.
Salt compartment cap not closed properly.| Check that the salt compartment cap
is closed properly.
Too much salt spilled in the Dishwasher while filling it with salt.| Use
funnel while filling salt to the compartment to avoid spillage.
A poor mains grounding.| Consult a qualified electrician immediately.
Detergent remain in the detergent compartment.
| Detergent was added when the detergent compartment was wet.| Make sure detergent compartment is dry before use.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE
| ****
POSSIBLE FAULT
| ****
WHAT TO DO
---|---|---
F5
| ****
Insufficient water
| Make sure the water inlet tap is open and water is flowing
Separate the inlet hose from the tap and clean the filter of the hose.
Contact for service if the error continues.
F3
| ****
Continuous water input
| ****
Close the tap and contact for service.
F2
| ****
Inability to discharge water
| Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
F8| Heater error| Contact for service.
F1
| ****
Overflow
| Unplug the machine and close the tap.
Contact for service.
F7| Overheating| Contact for service.
F9| Divisor position error| Contact for service.
FE| Faulty electronic card| Contact for service.
HI| High voltage failure| Contact for service.
LO| Low voltage failure| Contact for service.
PRACTICAL INFORMATION
- When the machine is not in operation
- Disconnect the plug and close the tap.
- Leave the door slightly open to prevent odour formation.
- Select the dry option to remove water droplets.
- Place dishes in the machine properly to achieve the best energy consumption, washing and drying performance. Please see the programme and consumption table for more information.
- Rinse dirty dishes before placing them in the dishwasher.
- Only use the Prewash programme when necessary.
- Do not place the machine near a refrigerator because it will reach high temperatures.
- If the machine is located in an area that is at risk of freezing, close the tap, disconnect the inlet hose from the tap and drain the water inside the hose and the machine completely.
PRODUCT SPECIFICATIONS
Brand
|
GODREJ
---|---
Model
| DWF EON VES 13Z SI STSL
Capacity of dishwasher
|
13
The energy efficiency class
| A+++
Annual energy consumption in kWh per year (AEc) ( 280 Cycle )*
|
234
Energy consumption (Et) (kWh per cycle)
|
0.815
Off-mode power consumption (W) (Po)
|
0.50
Left-on mode power consumption (W) (Pı)
|
1.00
Annual water consumption in litres per year (AWc) ( 280 Cycle )**
|
252 0
Drying efficiency class***
|
A
Standard programme name****
|
Eco
Standard program water consumption in liters per cycle|
9
Programme time for standard cycle ( min)
|
239
Airborne acoustical noise emissions dB(A) re 1 pW )| 46
Freestanding/Built-in| Freestanding
- Energy consumption 234 kwh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of low power modes. Actual energy consumption will depend on how the appliance is used. ** Water consumption 2520 litres per year based on 280 standard cleaning cycles. Actual water consumption will depend on how appliance is used. * Drying efficiency class A on a scale from G (least efficient) to A (most efficient) ** The “Eco” is the standard cleaning cycle to which the information in the label and the product information sheet relates. This programme is suitable to clean normally soiled tableware and it is the most efficient programme in terms of combined energy and water consumption.
BRANCH ADDRESSES / SERVICE CONNECT
WARRANTY DISHWASHERS
The Godrej Eon Vesta Dishwasher comes with 1 year comprehensive warranty from the date of purchase, against defective material or workmanship. In case of any such defect, Godrej & Boyce Mfg. Co. Ltd. – Appliance Division undertakes to get the appliance repaired free of charge during warranty period, subject to terms and conditions below .The pressure supplied by the tap should be a minimum of 0.03 Mpa and a maximum of 1 MPa, If the pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection. Any damage/defect arising due to entry of foreign particle into the machine that causes malfunctioning is Defect/Damage due to rust (internal & external components) is not covered under warranty. Extended warranty is not applicable for any part of the machine.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>