godrej SeeThru RE7 Video Door Phone User Manual
- June 4, 2024
- Godrej
Table of Contents
- FEATURES AND FUNCTIONS
- SPECIFICATIONS OF INDOOR UNIT
- PACKAGE CONTENTS
- HARDWARE DESCRIPTION (INDOOR UNIT)
- OPERATION OF THE VIDEO DOOR PHONE
- INSTALLATION
- CABLING REQUIREMENT
- PRECAUTIONS
- INFORMATION ON E-WASTE HANDLING AND MANAGEMENT
- RECORD OF PURCHASE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
See THruRE7 VIDEO DOOR PHONE
User Manual
WARNING AND CAUTION
Please make sure to follow the instructions to prevent any danger or
property losses.
| Warning: Death or serious injury is expected.
---|---
| Do not
disassemble, install, or repair this product on your own accord.
| Do not place the product near a hot or humid place.
Do not forcibly bend the cord or put a heavy object on the product.
Do not use water, thinner or a detergent used to wash oil products when you
wash the exterior.
Do not connect to other products while in use.
| Make
sure to clean it by using a dry cloth to prevent any breakdown or electric
shock.
If the product emits a peculiar noise, odor or smoke, immediately cut off the
power, and then contact the service center.
| Caution: An Injury or property losses are expected
| Do not put the plug in the socket with a wet hand.
| Make
sure that dust or foreign substances are not gathered on the product.
Make sure to prevent foreign substances from entering the product.
Avoid direct rays of the sun or heating devices at the time of installation.
Install the product in a flat and stable place.
| Pull the plug if the product is not used for a long time.
| Do not unplug the micro SD card when recording, this generally will cause
loss of data.
FEATURES AND FUNCTIONS
Indoor Unit
- 7° color indoor monitor
- Handsfree
- Support one outdoor unit
- Two-way talk
- Support DC 12V/1Amp power input.
- Adjustable ring volume, brightness, contrast, and color.
- The adjustable door unlocks time.
- OSD menu support
- Door lock release
Outdoor Unit
- High-resolution pinhole camera
- IR LED for night vision.
- Surface mounted
SPECIFICATIONS OF INDOOR UNIT
Category | Specification |
---|---|
Display Screen | 7“ TFT |
Definition | 7” (800×480) |
Standard | PAL/NTSC |
Calling mode | Two-way conversation |
Calling time | 120s |
Standby current | Maximum 250MA |
Work current | Maximum 600MA |
Power supply | Power Adapater DC12V – 1AMP |
Work temperature | 0~+50 0C |
Installation way | Surface mounting |
SPECIFICATIONS OF OUTDOOR UNIT
Category | Specification |
---|---|
Camera type | Pinhole camera |
Definition (Hor.) | 600 TVL |
LEDs for night | IR LEDs (120 0 ) |
Power consumption | 200Ma max. (10V-13V DC) |
Power supply | Supplied from the indoor unit |
Operation temperature | -40 ~ +50 0C |
Installation | Surface/flush mount |
PACKAGE CONTENTS
HARDWARE DESCRIPTION (INDOOR UNIT)
No. | Description |
---|---|
1 | Button for monitoring outdoor panel view |
2 | Button to start talking with a visitor |
3 | Button for unlocking the door (Support only EM lock) |
4 | Hang up Button to stop talking with Visitor |
5 | Button to access setting/OSD menu |
6 | Connector provision to connect 12V DC power adapter |
7 | Connector provision to connect the outdoor unit |
HARDWARE DESCRIPTION (OUTDOOR UNIT)
NO. | Part Name |
---|---|
8 | Mic |
9 | Pin hole camera |
10 | IR LED for night view |
11 | Button for ringing on indoor unit |
12 | Speaker |
OPERATION OF THE VIDEO DOOR PHONE
OPERATION INTRODUCTION
INSTALLATION
INDOOR UNIT
OUTDOOR UNIT
CABLING REQUIREMENT
The video door phone system uses 4 core cables. The cable should be used according to different distance requirements from the outdoor panels to the indoor monitors. In the areas with a high possibility of interference, it is recommended to use a 75ahm coaxial for connection for a better video signal.
RVV4 (mm) | 0.3 | 0.5 |
---|---|---|
Distance (mm) | 30 | 50 |
PRECAUTIONS
– Do not place the monitor to the TV set or in an environment with high
temperatures and damp places. – Do not take apart the outdoor units or any
parts of the video system. – Protect the lens of the outdoor camera unit from
direct sunlight to avoid pale pictures on the monitor. – Do not use the
equipment when in a vibrations environment. Protect the equipment from falls.
ATTENTION: The outdoor unit is suitable ONLY for Installed inside the
building, else, there Is a risk of damage to the product.
INFORMATION ON E-WASTE HANDLING AND MANAGEMENT
Dear Customer,
The Ministry of Environment and Forests have published The E-waste (Management
and Handling) Rules 2010 which comes in elect from 1st May 2012.
E-waste is defined as any electrical or electronic component of products in
whole or in part, or rejects from their manufacturing or repair process which
are intended to be discarded. These rules apply to every producer; consumer or
bulk consumer involved in the manufacture, sale, purchase and processing of
electrical and electronic equipment or components as specified in Schedule 1
(please refer to our website www.godrej.com under the
‘Green Think’ sec of Godrej Security Solutions Division Page for more
details). Under these rules, specific roles and responsibilities are defined
for producers, consumers and recycling handling and managing e-waste. E-waste
is to be managed in an environmentally sound manner which means, taking steps
to ensure that health and the environment are protected from adverse ellects
of hazardous substances contained in such wastes. Rule 6 of the E-waste
(Management and Handling) Rules 2010 states that bulk consumers of electrical
and electronic equipment shall be responsible for the recycling of the e-waste
generated by them. Bulk consumer means bulk users of electronic and electrical
equipment such as Central Government or State Government Departments, public
sector undertakings, banks, educational institutions, multinational
organizations, and international agencies, private companies that are
registered under the Factories Act, 1948 and Companies Act, 1956. The bulk
consumers have to ensure that the e-waste generated by them is channelized to
authorized collection centres or is taken back by the producers. They shall
maintain records of e-waste generated by them in Form 2 and make such records
available for scrutiny by the State Pollution Control or the Pollution Control
Committee concerned. All consumers of electrical and electronic equipment
irrespective of their status as bulk consumers or not, shall ensure that
e-waste generated by them is channelized to authorized collection centres (s)
or registered dismantler(s), or recycler(s) or is returned to the pick-up/take
back services provided by the producers. (Please refer to our website
www.godrej.com under the “Green Think’ sec of Godrej
Security Solutions Division Page for more details).
All our products intended to be recycled under the category of e-waste (as
defined above) carry a label or stamp of the WEEE symbol (A wheelie bin with a
cross), which states that it falls under the hazardous waste category and is
not to be disposed of along with normal garbage.
We seek your support in ensuring environmentally sound management of e-waste
and aid us in sustaining our earth’s natural resources and maintaining the
earth’s green cover intact for the benefit of our future generations.
RECORD OF PURCHASE
Please fill your details below for future reference.
Date of purchase:……………..
Product model:……………………
Name & address of Distributor/Dealer;………………………
Distributor phone number: — ………………..
FOR SAFETY, PLEASE READ THIS MANUAL PRIOR TO USE.
Godrej & Boyce Mfg. Co. Ltd., Godrej Security Solutions
Regd. Office: Plant No. 17, Pirojshanagar,
Vikhroli, Mumbai – 400079
Toll-Free: 1800 209 9955 (Sales & Service)
Whatsapp Support: +91 9321665511 (Service)
Visit: www.godrejsecure.com
Email: secure@godrej.com (Sales),
secare@godrej.com
Follow us: (Service)
www.facebook.com/GodrejSecure
www.twitter.com/godrejsecure
An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Products Marketed and
Serviced by Godrej and Boyce Mfg. Co. Ltd.
GSS/IMC/SEETHRU RE7 USER MANUAUSEPT.2021 /V1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>