Uixe SSL-17261BK 1-Light Black Outdoor Barn Light Wall Mount Sconce Instruction Manual
- May 21, 2024
- UIXE
Table of Contents
SSL-17261BK 1-Light Black Outdoor
Barn Light Wall Mount Sconce
Instruction Manual
ASSEMBLY INSTRUCTIONS
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
***** PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the rubber rings and ball nuts from the mounting unit.
Use the mounting screws to attach the mounting unit to the junction box(not
included).
STEP 2
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled green
ground screw. Then, connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 3
Attach the fixture to the mounting unit through screw holes as show,and secure
it with rubber rings and ball nuts.
NOTICE: Please use caulk in the back plate and wall mounting surface to
prevent water from entering.
STEP 4
Lock tight the arm.
STEP 5
Remove the socket ring from the socket.
Use the socket ring to attach the shade to the fixture.
STEP 6
Install bulb (not included)
