HELIOS ICT200DF-20BRC Smart GMT DC Load Distribution Panel User Manual

June 12, 2024
HELIOS

HELIOS ICT200DF-20BRC Smart GMT DC Load Distribution Panel

HELIOS ICT200DF-20BRC Smart GMT DC Load Distribution
Panel

Introduction

The ICT200DF-20BRC is an intelligent, dual bus, DC load distribution GMT fuse panel with remote monitoring and power control over Ethernet. Each bus is rated at 100A continuous and provides 10 GMT fuse positions, each rated at 20 Amps maximum. The ICT200DF-20BRC is designed for sites requiring I.P.-based remote monitoring and power control of up to 20 connected loads.

Overview

The ICT200DF-20BRC DC Distribution Panel provides a dual bus, common ground 1RU solution for applications requiring remote monitoring and power control of up to 20 individual loads. The on-board TCP/IP and web server provide an easy to use, graphical user interface for remote management and power control of system and individual outputs. Each bus supports up to ten 20A GMT fuses for 48 or 24 volt DC applications.

Dual voltages and polarities can be supported on a single panel, useful for sites requiring -48 and +48 or -48 and +24 volts DC to be distributed simultaneously.

Alarms can be sent to multiple email accounts, and each output has definable load-shed settings. The network watchdog feature will ping up to 12 pre- determined I.P. addresses, such as a router, and power-cycle the device if not answered.

There are five digital inputs for connecting site monitoring sensors such as door, fire, and water alarms. These alarms can be given individual names and be sent as email alarm notifications.
The on-board web server means there is no software to maintain, and SNMPv3 is also supported. Firmware can be updated remotely over Ethernet.

The ICT200DF-20BRC allows each connected load to be monitored, power cycled, or taken off-line. This functionality can be used to conserve power, troubleshoot devices, and reboot connected loads remotely, possibly preventing or delaying the need for a costly site visit

Features

  • 200A continuous system rating / 100A per bus
  • +/-24 or +/-48 VDC
  • 20A GMT fuses per output (16A continuous)
  • TCP/IP remote management and power control of individual outputs
  • Ten fully managed outputs per bus
  • Independent Form C alarm contacts for each bus
  • Remote firmware update capability
  • HTTPS, SMTP, SNMPv3 protocols supported
  • Monitoring and alarm reporting of each output for pinpointing of issues with connected loads
  • Each output has adjustable load-shed settings
  • Adjustable power-on sequencing
  • Site monitoring sensor inputs with alarm reporting
  • Data logging
  • 2-year warranty

Applications

  • Fixed Wireless Broadband
  • Radio Access Networks
  • DAS
  • Remote Sites
  • Secondary Distribution
Power Specifications
Operating Voltage Range (POS or NEG) 20-60VDC
System Current Rating 200A cont
A/B Bus Current Rating 100A cont
Number of Outputs per Bus 10
Max. GMT Fuse Size 20A (1)
Continuous Load Rating 16A per output
Environment
Operating Temperature Range -20 ℃ to +60 ℃
Cooling Convection
Mechanical
Form Factor 1RU – 19 Inch rack mount
Dimensions L x W x H 9.4 x 19.0 x 1.7 in

236 x 483 x 45 mm

Weight (lbs/kg)| 9.5 lbs / 4.3 kg
Input Connectors| Dual 1/4” – 20 studs with 0.625” spacing
Output Connectors| Cage clamp 10-22AWG

Design Standards

FCC, CE, ROHS

Warranty

Two years

Communications and Control

Ethernet| TCP/IP built-in web server and graphical user interface, 10/100BASE-T, IEEE 802.3 compatible
---|---
Supported Protocols| IPv4, HTTP, HTTPS, SMTP, DNS, TCP, UDP, ICMP, DHCP, ARP, SNMPv1/v2c/v3
SNMP Ports| UDP Port 161, SNMP Traps: UDP Port 162
Firmware Upgrades| Upgradeable over Ethernet
Security| Password protection, HTTPS encryption, TLS 1.2
20 Channel Output Monitoring| Current draw measured and reported for each output, user definable under and over current alarms
Email and SMS Alerts| Multiple email or text accounts, adjustable intervals
Data Logging| Up to 30 days at 1 minute sampling rate, csv file download, major event logging
Network Watchdog| Autonomously ping up to 12 I.P. addresses and power-cycle output if no response, definable settings
Power Cycling and Rebooting| Remote on/off control of every output individually
Auto Restore Mode| Return to previous output settings after a power loss
Power-up Delay Sequencing| User selectable 0 to 60 second delay between outputs
Auto Load Shedding| Each output user definable, manual or auto restart

Configurable Alarms
  • Channel over current threshold
  • Channel over/under current
  • Bus over current
  • Automatic load shedding
  • Bus over/under voltage threshold
  • Site monitoring input contact status
Site Monitoring Inputs
Max. GMT Fuse Size 5
Connector type Removable cage clamp 16-28AWG
Ordering Information
Model Number Description
ICT200DF 20BRC Dual bus common ground 10-10 GMT fuse DC distribution panel

(fuses not included)
ICT-RA2319 (2)| ICT 23 to 19 inch, 1RU rack mount reducer kit

(1) GMT fuses not supplied by ICT
(2) Option, orderable separately

Customer Support

Australia:sales@heliosps.com.au – Middle East & Asia: sales@heliosps.asia – New Zealand: sales@heliosps.co.nz
Power Solutions for Critical Infrastructure
Supporting your Operational Reliability

HELIOS-Logo

Documents / Resources

| HELIOS ICT200DF-20BRC Smart GMT DC Load Distribution Panel [pdf] User Manual
ICT200DF-20BRC Smart GMT DC Load Distribution Panel, ICT200DF-20BRC, Smart GMT DC Load Distribution Panel, DC Load Distribution Panel, Load Distribution Panel, Distribution Panel
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals