FIRElood LH45-1 Pyrography Wood Burning Kit Instruction Manual

PYROGRAPHY MACHINE Zibo Huoke Hardware Tools Co., Ltd

IMPORTANT SAFEGUARDS

WARNING:

1. Warnings must be followed carefully to avoid body injury. improper use may result in electric shock, fire,personal injury, and other damage:
2. Keep unplugged when moving the machine.
3. Keep unplugged when installing accessories.
4. Place on a flat and stable platform and operate under ventilated conditions.
5.  Wear special protective equipment when operating the machine.
6. Do not use this machine in a hazardous location.
7. Only use it when the machine is working correctly.
8. Do not disassemble and repair this machine.
9. Do not use an unsuitable AC outlet.
10. Do not touch the heating plate when the machine heating.
11. Do not use in humid environments or in contact with water. Also, do not infiltrate liquid in the machine to prevent fire or electric shock caused by a short circuit.
12. Do not use the power supply that does not meet the rated voltage. The power supply that does not meet the specified voltage may cause fire or electric shock.
13. Ensure that the machine is grounded so as not to cause harm to body.
14. Do not touch the rotating rod or bearing part with your fingers during use in case of injuries.
15. If the machine is not in use for a long time, please unplug the power cord from the socket.
16. Do not use the machine during thunderstorms or lighting to avoid damage to the machine.
17. Place the machine smoothly on the flame-retardant table and keep away from flammable and explosive items.
18. Please stop using it if the machine smokes, emits a peculiar smell, or becomes noisy and in other abnormal conditions.
19. This appliance can be used by children aged 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
20. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
21. In the process of temperature adjustment, there will be a slight delay in the digital display temperature, which is a normal phenomenon, please wait a moment.

SAVE THESE INSTRUCTIONS

Instruction Manual of LH45 Pyrography Machine

1. Pyrography machine switch: Turn on the switch when using it, and turn it off when not in use to avoid danger.

2. Temperature regulator: is to adjust the temperature of wood burning pen, low temperature rendering to adjust the temperature in the light gray area, the red area is the high temperature area, the high temperature area is mainly the line painting effect.
   The adjustment of the temperature of the wood burning pen is slowly adjusted by the thermostat, first of all, the temperature is adjusted to about 600 degrees and then slowly adjusted to a lower place, the best temperature is about 300-500 degrees. Low temperature rendering is best used in the range of 250-400 degrees. When rendering temperature adjustment, watching wood burning pen can burn light colors on the material, the temperature at this time is the best rendering effect (different material density and humidity need different optimal temperatures, please be patient to debug). You can draw the color painting with different shades and layers over and over again. If the temperature is too high, it is difficult to render the delicate picture effect. When tracing the line, the temperature can be appropriately increased, and smooth lines can be drawn accord- ing to your own situation. If you want to bake the line well, you should learn to slow down the pen at low temperature. The lower the temperature of the burning wood used, the slower the writing pen, the better the painting effect.

3. Thermometer : The temperature of the pyrography machine is adjusted by adjusting the Temperature value,and the temperature adjustment display range is 250-700 degrees.

4. Pyrograph pen socket: The pyrograph pen plug should be closely matched with the socket,the plug should be inserted into the bottom of the socket, which should be closely matched to avoid  overheating and buming accessories

5. wood burning pen tip storage box: Put the pen tip in the storage box for easy access and use.

6. Wood burning pen storage rack: This is a rack for wood bumning pens

7. Cleaning sponge: This blue sponge must be soaked with water before use. When there is char- coal dirt on the wood buming nib, put the wood buming nib on the sponge to wipe it clean.

Note for pyrography machine:

1. Tighten the screw of the pen tip when applying the pen tip, avoid poor contact between the pen tip and the terminal so that the pen tip is not hot. The overheating of the terminal will burn out the ac- cessories, If the terminal is too hot, that is the pen tip is not tightly fastened, and it should be fastened with a screwdriver in time.
2. Select a heating wire under 1mm as the pen tip. Do not choose other non-heating wire materials such as iron wire as the pen tip,which is very dangerous and easy to bumn out all the accessories in the movement, and it is easy to cause electric shock and firemovement, and it is very easy to get electric shock and fire.

Instructions for using the wood burning wire tip

1)The function of the bent shape wire pen tip is introduce Tips for using a bent metal wire pen tip. The main function of a bent pen tip is to trace lines and render small areas of silk hair. When tracing lines, the blue indicator on the temperature control knob points towards around 250C- 350C.
Slowly move the pen and do not move too fast. Look at the smooth edges of the line color, and the entire line color should be uniform and just right. When rendering, adjust the temperature to around 220C-300 °C, and draw hair fine lines at a temperature of around 250 °C -350C.
2)Pointed flat shape of metal wire pen head function introduction
Tips for using pointed metal wire pen tips: Pointed pen tips mainly focus on drawing fine lines and rendering fine parts. The temperature for drawing fine lines is 220-250 °C, and the temperature for rendering fine parts is 220-230 °C.
When rendering, it is best to watch the color change slightly on the gourd and wooden board, and gradually deepen the color so that the color is delicate and rich. Dark color rendering is best at around 300 °C.
3)Flat shape wire pen tip function introduction The flat metal wire pen head is mainly used for flat rendering and side silk line drawing. The temperature for flat rendering is around 220C-290 °C for light colors, and 300C-400 °C for dark colors.
Summary: The temperature of the pen head introduced earlier should not be too dogmatic and rigid. Depending on the density, humidity, and hardness of the material used for soldering, the temperature required for soldering may vary.
You can learn from and adjust the experiment flexibly to find the most suitable temperature for yourself. Whether it’s writing, tracing, or rendering, if you want good results, you would rather use the pen slowly at low temperatures to deepen layer by layer, Never use a pen quickly at high temperatures. It is difficult to see works with uneven lines, uneven rendering colors, uneven depth, rough and delicate images.

Correct installation of wood burning wire tip
The pen head is not hot, high and low, the pen head sparks, and the pen holder is hot! ! In fact, it is caused by the pen tip not being installed properly. When installing the pen head, first loosen the screw as shown in Figure 1, and then insert the foot of the soldering pen head to the end according to Figure 2.3 , pay attention to the insertion position of the figure 4, and then tighten the screws as shown in Figure 5. The screws should be tightened, but do not use Tighten the screw with brute force. Tips for using wood burning pen tips Tips for using wood burning tools and knives

| Wwarning-To reduce the risk of injury, user must read instructions manual carefully.
---|---
| FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
| IC STATEMENT
The digital apparatus complies with Canadian CAN ICES 3 (B)/NMB 3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
**| CORRECT DI S POSAL
This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices
**| This symbol, placed before a safety comment, indicates a kind of precaution, warning, or danger.lgnoring this warning may lead to an accident. Please always follow the recommendation below to reduce the risk of injury, fire, or electrocution.
| This product is of protection class Il. That means it is equipped with enhanced or double insulation.

Technical data

Made In China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>