JBL AWC82 All-Weather 8 Inch 2-Way 250W Passive Coaxial Loudspeaker Owner’s Manual
- June 4, 2024
- JBL
Table of Contents
AWCB2
All-Weather Compact
2-Way Coaxial
Loudspeaker with 811 LF
Professional Series
AWC82 All-Weather 8 Inch 2-Way 250W Passive Coaxial Loudspeaker
Key Features:
► Highly weather-resistant IP56 rating
► Consistent 120° x 120° broadband pattern control
► Components:
• 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in the) voice
coil.
• 25 mm (1 in) exit compression driver with unique patented design and high-
temperature polymer diaphragm.
► Extraordinary clarity for speech, with extended frequency response for
music.
► Advanced high-slope crossover network for constant coverage and smooth,
natural midrange.
► 250 Watt power handling (average continuous pink noise) with high
sensitivity provides high SPL capability.
► High-power passive crossover network.
► Overload protection
► 80 Hz – 20 kHz frequency response.
► 200 Watt 70V / lOOV multi-tap (built-in transformer) or direct 80 low-
impedance.
Applications:
The AWCB2 is a compact, coaxial-driver, 2-way, highly weather-resistant full- range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including spo1ts facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/ paging systems, swin1ming pools, and a wide variety of other outdoor or indoor venue types.
The AWC82 is comprised of a high-power co axial 200 mm (8 in) low-frequency
driver and 25 mm (1 in) high-frequency compression driver. The co-axial design
utilizes a unique tapered pole-piece design and transitions to the cone of
the low-frequency driver as a large diameter pattern control horn for the high
frequencies, both eliminating high-frequency beaming which is common among
this category,y of the speaker, and extending pattern control to the lowest
possible frequencies. The result is a coaxial speaker with wide, extremely
consistent 120° coverage on a broadband basis.
Component features include a Kevlar-reinforced low-frequency cone for
reliability, a well-damped surround for smooth frequency response, a high-
temperature voice coil, and a reduced distortion design through saturated-gap
magnet geometry. The high-frequency compression driver features a unique
patented design, high-temperature polymer diaphragm, and fluid-cooling for
high output levels with low distortion.
The paintable enclosure is constructed of thick, ABS plus fiberglass and is
heavily braced to maximize low-frequency performance. The corrosion-resistant
zinc-rich extra-thick powder-coated steel grille is backed with open cell foam
and high thread-count mesh, providing excellent protection in the harshest
environments. The system is rated IP-56, per IEC529 when installed at a
minimum of 5° down-tilt.
The system is equipped with a 200W 70V/ 100V multi-tap transformer. Connection
is made via outdoor-rated terminals in a recessed terminal cup. A protective
terminal compartment cover is included, along with a gland nut, which forms a
water-tight seal with a round-jacketed cable having an outside diameter
between 4 mm (0. 16 in) and 9 mm (0.36 in).
A heavy-duty weather-capable zin c- rich, thick powder-coated U-type mounting
bracket is included.
Specifications:
S stem:
Frequency Range (-10 dl3) ‘:| 80 plz – 20 kHz
Frequency Response (±3 dl3)’:| 100 plz – 20 kHz
Coverage ParternJ:| 120° x 120°
Direct activity Factor:| 8. 1 (I k – 16 kHz)
Directivity Index (DI):| 8.4 dl3 (1 k – 16 kHz)
Long-Term Sys1em Power Rating (IEC) ‘:| 250 \YI 2 hrs.
Sensitivity (2.83V @ I’m):| 94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL’:| Direct 80: 118 dB (peaks or 124 dB)
Crossover Network:| 1.8 kHz, 3rd order (18 dB ‘oct) high-pass plus conjugate
10 HF, 2nd
Nominal Impedance:| 8 ohms
Transformer Taps:| 70V: 200\Y/, 100\Y/, 50\Y/, 25\Y/
Transducers:
Low-frequency Driver:| Kevlar-reinforced cone with weather treatment, 50 mm (2
in) voice
High-Frequency Driver:| 25 mm (1 in) diaphragm and voice coil diameter, high
temperature
HF Driver Protection:| Minimum audibility SonicGuard™ HF overload protection
Physical:
Enclosure:| ABS with Glass enclosure
Attachment:| Two MIO (fine-thread) points for included U-bracket. M6 secondary
sa[ety attachment point on the back panel.
Grille:| Corrosion-resistant zinc-rich extra-thick powder coated steel grille,
3-layer assembly with foam and woven poly mesh backing.
Input Connection:| CE-compliant covered barrier strip terminals. Barrier
terminals accept up to 9 mm outside 4 mm inside open-lug (6, 8, or # I 0)
plus bare wire up to 2.5 mm (12 A\Y/G) wire or spade lugs. Terminal
compartment cover equipped with gland nut that forms water.tight seal with
round-jacketed cables with outside diameters between 4.0 mm (0. 16″) and 9.0
mm (0.36″)
Environmental l| rPS6 per IEC;29, with a minimum 5° downward aiming angle.
Exceeds Mi l Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85
for salt spray (168 hrs).
Dimensions:| 300 x 300 x305 111111 (1 1.8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland n·u1
359 nun (14.2 in) including a bracket extending 10 back
Colors:| Available in gray (similar to Pantone 420C) and black (-13 K)
Net Weight| 9 8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight| 14.1 kg (31.0 lb)
Included Accessories| U-bracket, matches loudspeaker color (gray or black),
zinc-rich extra-thick powder coated, steel.
‘ Full-space (free-field)
1 Average 1 kHz to 10 kHz
1 ! EC standard, full bandwidth pink noise with 6 dB crest factor.
‘ Calculated based on power rating and measured full space sensitivity.
JBL continu:1\ly eng:1ges in research related to product improvement. Changes
introduced into existing products without notice are an expression of that
philosophy.
AWC82 12″ All-Weather Compact 2-Way Coaxial Loudspeaker with 8″ LF
| Frequency Response and Impedance | Off-Axis Frequency Response |
|---|
Beam width| Directivity Index:
Dimensions
| Attaching U-Bracket to Cabinet | Terminal Compartment |
|---|
| 
Limited Warranty
The JBL Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of original purchase. Enclosure and all other JBL products are warranted for two years from the date of original purchase.
Who is Protected by This Warranty?****
Your JBL Warranty protects the original owner and all subsequent owners so long as A) Your JBL product has been purchased in the Continental United States, Hawaii, or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local JBL distri butter for warranty information.);_and B) The original dated bill of sale is presented whenever warranty service is required.
What is Covered by the JBL Warranty?****
Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered: Damage caused by accident, misuse, abuse, product modification, or neglect; damage occurring during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual; damage result ing from the performance of repairs by someone not authorized by JBL; claims based u·pon any misrepresentations by the seller; and JBL product on which the serial number has been defaced, modified or removed.
Who Pays for What?****
JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be sure to save the original shipping cartons because a charge will be made if replacement cartons are requested. Payment of shipping charges is discussed in the next section of this warranty.
How to Obtain Warranty Performance
If your JBL product ever needs service, write or telephone us at JBL
Incorporated (Attn: Customer Service Department), 8500 Balboa Boulevard, P.O.
Box 2200, Northridge, California 91329 (818/893-8411). We may direct you to
an authorized JBL Service Agency or ask you to send your unit to the factory
for repair. Either way, you’ll need to present the original bill of sale to
establish the date of purchase. Please do not ship your JBL product to the
factory without prior authorization.
If transportation of your JBL product presents any unusual difficulties,
please advise us and we may make special arrangements with you. Otherwise, you
are responsible for transporting your product for repair or arranging for its
transportation and for payment of any initial ship ping charges. However, we
will pay the return shipping charges if repairs are covered by the warranty.
Limitation of Implied Warranties
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANT ABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS
WARRANTY.
EXCLUSION OF CERTAIN DAMAGES
JBL’S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY
DEFECTIVE PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY KIND.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITA OPTIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE NOTE: There may be a difference between
this Warranty and the Warranty in your Instruction Manual. In the event of a
difference, this Warranty will prevail.
JBL Incorporated
59660 8/08 8500 Balboa Blvd. P.O. Box 2200, Northridge, California 91329
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2012 JBL Professional
www.jblpro.com
SSAWC82 CRP 06/12
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>