VISUAL COMFORT RL1493 Large Floor Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
Riley Large Floor Lamp
Item # RL 1493
ASSEMBLY INSTRUCTIONS
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install lamp body (F) to base (L), then secure with lock washer (G) and hex nut (H) using provided wrench (I).
-
Remove backing sheet from felt paper (J), then neatly apply to bottom side of lamp base.
-
Install harp (C) onto saddle (E), adjust to desired height, then tighten adjustment knobs (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and attach to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Place diffuser (M) onto top of shade (B).
-
Install light bulb into the socket.
-
Remove protective cover (K) from the plug.
-
Plug into electrical outlet and test fixture.
Care Instructions : Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
RALPH LAUREN
Documents / Resources
|
VISUAL COMFORT RL1493 Large Floor
Lamp
[pdf] Instruction Manual
RL1493, RL1493 Large Floor Lamp, Large Floor Lamp, Floor Lamp, Lamp
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>